W ramach naszych nowych aktualizacji dotyczących bezpieczeństwa prosimy o zresetowanie hasła
Wybierz swój kraj lub region
- Austria
- Bosnia
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Lithuana
- Luxembourg
- Latvia
- Netherlands
- Norway
- Poland
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
- Serbia
- Switzerland
- United Kingdom
2 209,00 PLN
W magazynie - wysyłka w ciągu 1-2 dni
The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
Kompatybilność płyty |
KB-250/250 KB-UNIVL |
3 948,00 PLN
W magazynie - wysyłka w ciągu 1-2 dni
This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
Gwint | M8 |
3 384,00 PLN
W magazynie - wysyłka w ciągu 1-2 dni
The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
Kompatybilność płyty |
KB-400/400 KB-UNIVL |
136,30 PLN
W magazynie - wysyłka w ciągu 1-2 dni
Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Gwint | Without Thread |
112,80 PLN
W magazynie - wysyłka w ciągu 1-2 dni
Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
188,00 PLN
W magazynie - wysyłka w ciągu 1-2 dni
The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
225,60 PLN
W magazynie - wysyłka w ciągu 1-2 dni
Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Gwint | Without Thread |
42,30 PLN
W magazynie - wysyłka w ciągu 1-2 dni
With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
Gwint | M8 |
1 052,80 PLN
W magazynie - wysyłka w ciągu 1-2 dni
The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
Kompatybilność płyty |
FV-BP200/200C FV-BP200/200F FV-BP200/200P |
42,30 PLN
W magazynie - wysyłka w ciągu 1-2 dni
Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
Długość | 20 mm |
Średnica | 8 mm |
61,10 PLN
W magazynie - wysyłka w ciągu 1-2 dni
The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
Gwint | M4 |
70,50 PLN
W magazynie - wysyłka w ciągu 1-2 dni
Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
Długość | 20 mm |
Średnica | 16 mm |
211,50 PLN
W magazynie - wysyłka w ciągu 1-2 dni
The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
136,30 PLN
W magazynie - wysyłka w ciągu 1-2 dni
Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Gwint | Without Thread |
3 102,00 PLN
W magazynie - wysyłka w ciągu 1-2 dni
This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
Gwint | M8 |
103,40 PLN
W magazynie - wysyłka w ciągu 1-2 dni
Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
Długość | 100 mm |
Średnica | 16 mm |
136,30 PLN
W magazynie - wysyłka w ciągu 1-2 dni
Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
239,70 PLN
W magazynie - wysyłka w ciągu 1-2 dni
The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
Wymiar | 120 x 45 x 12 mm |
4 888,00 PLN
W magazynie - wysyłka w ciągu 1-2 dni
The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
Gwint | M8 |
Zastosowanie |
WMP Przenośne ramiona pomiarowe |
371,30 PLN
W magazynie - wysyłka w ciągu 1-2 dni
The support stop allows the user to apply a positive clamping force with variable pressure.
Gwint | M8 |
Dodano do Twojego koszyka.
Dostępność produktu przez lokalizację placówki
Godziny