W ramach naszych nowych aktualizacji dotyczących bezpieczeństwa prosimy o zresetowanie hasła
Wybierz swój kraj lub region
- Austria
- Bosnia
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Lithuana
- Luxembourg
- Latvia
- Netherlands
- Norway
- Poland
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
- Serbia
- Switzerland
- United Kingdom
230,30 PLN
W magazynie - wysyłka w ciągu 1-2 dni
Safety / locking pin for the 3-port probe module and arm of the rack
Długość | 22 mm |
Średnica | 8 mm |
112,80 PLN
W magazynie - wysyłka w ciągu 1-2 dni
Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
70,50 PLN
W magazynie - wysyłka w ciągu 1-2 dni
Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
Długość | 20 mm |
Średnica | 16 mm |
211,50 PLN
W magazynie - wysyłka w ciągu 1-2 dni
The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
3 102,00 PLN
W magazynie - wysyłka w ciągu 1-2 dni
This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
Gwint | M8 |
239,70 PLN
W magazynie - wysyłka w ciągu 1-2 dni
The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
Wymiar | 120 x 45 x 12 mm |
371,30 PLN
W magazynie - wysyłka w ciągu 1-2 dni
The support stop allows the user to apply a positive clamping force with variable pressure.
Gwint | M8 |
183,30 PLN
W magazynie - wysyłka w ciągu 1-2 dni
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
Wymiar | 30 x 30 x 150 mm |
61,10 PLN
W magazynie - wysyłka w ciągu 1-2 dni
The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
Długość | 6 mm |
Średnica | 8 mm |
4 371,00 PLN
W magazynie - wysyłka w ciągu 1-2 dni
The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
263,20 PLN
W magazynie - wysyłka w ciągu 1-2 dni
The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
Długość | 50 mm |
Średnica | 16 mm |
89,30 PLN
W magazynie - wysyłka w ciągu 1-2 dni
Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
Gwint | M4 |
1 156,20 PLN
W magazynie - wysyłka w ciągu 1-2 dni
Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
Gwint | M4 |
1 118,60 PLN
W magazynie - wysyłka w ciągu 1-2 dni
The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
89,30 PLN
W magazynie - wysyłka w ciągu 1-2 dni
The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
Gwint | M8 |
211,50 PLN
W magazynie - wysyłka w ciągu 1-2 dni
The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
Wymiar | 130 x 30 mm |
169,20 PLN
W magazynie - wysyłka w ciągu 1-2 dni
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
Wymiar | 30 x 30 x 100 mm |
211,50 PLN
W magazynie - wysyłka w ciągu 1-2 dni
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
Wymiar | 30 x 30 x 250 mm |
2 632,00 PLN
W magazynie - wysyłka w ciągu 1-2 dni
The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
Kompatybilność płyty |
KPP-300/300 KPT-300/300 |
197,40 PLN
W magazynie - wysyłka w ciągu 1-2 dni
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
Wymiar | 30 x 30 x 200 mm |
Dodano do Twojego koszyka.
Dostępność produktu przez lokalizację placówki
Godziny