text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji dotyczących bezpieczeństwa prosimy o zresetowanie hasła
ID: GB0096-2001

zł28,521.24

zł23,188.00

Ceny obowiązują wyłącznie przy zamówieniach złożonych za pośrednictwem sklepu internetowego
Dostawy > 25 dni

Szybki Podgląd

SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.

With the SWIFT-CHECK interim testing artefact, CMM operators can perform quick and simple checks about the current performance of the machine. It delivers clear and easy results, giving operators the assurance they need to confidently perform further measurements with indexing probe heads in combination with touch trigger probes and scanning sensors.

SWIFT-CHECK performs different routines to check the machine's current performance:

  • Length check: Measures linear repeatability for each orientation and evaluates squareness of the CMM axes in each measuring plane.
  • Ring check: Measures diameter and circularity of the ring gauge by either single points or a scan.
  • Sphere check: Measures 25 points and evaluates the form and size errors related to the maximal permissible probing errors.
  • Wrist/Probe head check: Measures 25 points on the sphere with each of the wrist calibrated positions.

All checks are displayed either as a PASS/FAIL statement or presented in a .CSV file and a standard PC-DMIS or QUINDOS report.

Delivery Contents
- SWIFT-CHECK frame
- Length bar (L = 300 mm)
- Ring gauge (D = 25 mm)
- Sphere (D = 25 mm)
- Styli and adapters
- Calibration certificates
- Software (PC-DMIS or QUINDOS measurement routines)
- User guide
- Flight case

SWIFT-CHECK Data Sheet: Download

Prerequisites Indexing Probe Head 
Tactile Touch Trigger Probe 
Analogue Scanning Probe 
Kompatybilność WMP GLOBAL S 
GLOBAL Lite 
TIGO SF 
4.5.4 SF 
7.10.7 SF 
Kompatybilność oprogramowania PC-DMIS (od v2016) 
QUINDOS (od vQ7R18351) 
Czas pomiaru Test długości: 20 Minut 
Test na pierścieniu: 5 Minut 
Test na sferze: 5 Minut 
Test głowicy: 10 Minut 
Wymiary Wzorzec długości = 300 mm 
Pierścień wzorcowy = 25 mm 
Sfera wzorcowa = 25 mm 
Materiał Anodowane aluminium 
Wielkość 350 x 400 x 195 mm  
Waga 11 000 g