text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji dotyczących bezpieczeństwa prosimy o zresetowanie hasła
  1. Strona Główna
  2. Katalog
  3. WMP

WMP

Ceramic Calibration Sphere (D = 15.875 mm)
Ceramic Calibration Sphere (D = 15.875 mm)
ID: G39002200
Cena:  zł2,032.80
Szybki Podgląd: 

Calibration sphere (Ø15.875 mm) made out of ceramic with M8 thread for use of CMMs.
  • Sphere Material:  Ceramika
  • Średnica sfery:  15,875mm
  • Gwint zewnętrzny:  M8
Dostawy > 25 dni
Ceramic Calibration Sphere Kit (D = 25 mm, H = 200 mm)
Ceramic Calibration Sphere Kit (D = 25 mm, H = 200 mm)
ID: G39031501
Cena:  zł5,588.00
Szybki Podgląd: 

Calibration sphere set, included a certified calibration sphere (Ø25 mm) made out of ceramic and a support to position the sphere in different angles. Total height 200 mm and M8 machine fixing for use with CMMs.
  • Sphere Material:  Ceramika
  • Średnica sfery:  25mm
  • Gwint zewnętrzny:  M8
Dostawy > 25 dni
Ceramic Calibration Sphere Kit (D = 25 mm, H = 170 mm)
Ceramic Calibration Sphere Kit (D = 25 mm, H = 170 mm)
ID: G39032100
Cena:  zł3,484.80
Szybki Podgląd: 

Calibration sphere set, included a certified calibration sphere (Ø25 mm) made out of ceramic and an extension (120 mm). The set has a total height of 170 mm and M8 machine fixing for use with CMMs.
  • Sphere Material:  Ceramika
  • Średnica sfery:  25mm
  • Gwint zewnętrzny:  M8
Dostawy > 25 dni
Ceramic Calibration Sphere Kit (D = 15 mm, H = 200 mm)
Ceramic Calibration Sphere Kit (D = 15 mm, H = 200 mm)
ID: G39031401
Cena:  zł3,388.00
Szybki Podgląd: 

Calibration sphere set, included a certified calibration sphere (Ø15 mm) made out of ceramic and a support to position the sphere in different angles. Total height 200 mm and M8 machine fixing for use with CMMs.
  • Sphere Material:  Ceramika
  • Średnica sfery:  15mm
  • Gwint zewnętrzny:  M8
Dostawy > 25 dni
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Cena:  zł2,050.40
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X3
  • Średnica:  40mm
Czas dostawy 10-15 dni
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Cena:  zł2,376.00
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X1
  • Średnica:  60mm
Czas dostawy 10-15 dni
SWIFT-SET
SWIFT-SET
ID: GB0122-1000
Cena:  zł35,816.00
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon’s HP-S-X tactile scanning sensors.
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X5, Mocowanie trzpienia (z adapterem) dla HP-S-X3, Mocowanie trzpienia (z adapterem) dla HP-S-X1
  • Oś obrotu:  0° - 360°
  • Kąt obrotu:  0°- 90°
Czas dostawy 10-15 dni
Ceramic Calibration Sphere (D = 15 mm)
Ceramic Calibration Sphere (D = 15 mm)
ID: C55918028
Cena:  zł1,469.60
Szybki Podgląd: 

Calibration sphere (Ø15 mm) made out of ceramic with an M8 thread for use of CMMs.
  • Sphere Material:  Ceramika
  • Średnica sfery:  15mm
  • Gwint zewnętrzny:  M8
Dostawy > 25 dni
Ceramic Calibration Sphere (D = 25 mm)
Ceramic Calibration Sphere (D = 25 mm)
ID: C55918029
Cena:  zł2,164.80
Szybki Podgląd: 

Calibration sphere (Ø25 mm) made out of ceramic with an M8 thread for use of CMMs.
  • Sphere Material:  Ceramika
  • Średnica sfery:  25mm
  • Gwint zewnętrzny:  M8
Dostawy > 25 dni
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Cena:  zł3,889.60
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Vee Locator
Vee Locator
ID: FV-FEMALE
Cena:  zł110.00
Szybki Podgląd:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
W magazynie - wysyłka w ciągu 1-2 dni
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Cena:  zł184.80
Szybki Podgląd:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Cena:  zł39.60
Szybki Podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Długość:  20 mm
  • Średnica:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Cena:  zł61.60
Szybki Podgląd:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Gwint:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Cena:  zł211.20
Szybki Podgląd:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Gwint:  Without Thread
W magazynie - wysyłka w ciągu 1-2 dni
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Cena:  zł39.60
Szybki Podgląd:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Centering Pin
Centering Pin
ID: FV-MALE
Cena:  zł88.00
Szybki Podgląd:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Gwint:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Cena:  zł206.80
Szybki Podgląd:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
W magazynie - wysyłka w ciągu 1-2 dni
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Cena:  zł136.40
Szybki Podgląd:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Gwint:  Without Thread
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Cena:  zł101.20
Szybki Podgląd:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Długość:  100 mm
  • Średnica:  16 mm
W magazynie - wysyłka w ciągu 1-2 dni