Hexagons COVID-19 Support & Response | Official Statement
Wybierz swój kraj lub region
- Austria
- Bosnia
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Lithuana
- Luxembourg
- Latvia
- Netherlands
- Norway
- Poland
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
- Serbia
- Switzerland
- United Kingdom
40,00 €
W magazynie - wysyłka w ciągu 1-2 dni
The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
Długość | 20 mm |
Średnica | 16 mm |
740,00 €
W magazynie - wysyłka w ciągu 1-2 dni
The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
Kompatybilność płyty |
KB-250/250 KB-UNIVL |
39,00 €
W magazynie - wysyłka w ciągu 1-2 dni
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
Wymiar | 30 x 30 x 150 mm |
250,00 €
W magazynie - wysyłka w ciągu 1-2 dni
Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
Gwint | M4 |
24,00 €
W magazynie - wysyłka w ciągu 1-2 dni
The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
930,00 €
W magazynie - wysyłka w ciągu 1-2 dni
The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
16,00 €
W magazynie - wysyłka w ciągu 1-2 dni
Cap screws are used to mount Swift-Fix components on the base plate.
Gwint | M8 |
790,00 €
W magazynie - wysyłka w ciągu 1-2 dni
The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
Kompatybilność płyty |
KPP-500/500 KPT-500/500 |
250,00 €
W magazynie - wysyłka w ciągu 1-2 dni
Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
Gwint | M4 |
36,00 €
W magazynie - wysyłka w ciągu 1-2 dni
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
Wymiar | 30 x 30 x 100 mm |
45,00 €
W magazynie - wysyłka w ciągu 1-2 dni
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
Wymiar | 30 x 30 x 250 mm |
42,00 €
W magazynie - wysyłka w ciągu 1-2 dni
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
Wymiar | 30 x 30 x 200 mm |
560,00 €
W magazynie - wysyłka w ciągu 1-2 dni
The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
Kompatybilność płyty |
KB-300/300 KB-UNIVL |
1 160,00 €
W magazynie - wysyłka w ciągu 1-2 dni
Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
Średnica zewnętrzna uchwytu (D1) | 125 mm |
Zakres mocowania zewnętrznego (A) | 1 - 126 mm |
Zakres mocowania wewnętrznego (I) | 32 - 122 mm |
Materiał | Stal Nierdzewna |
Mocowanie | M4 / M8 |
166,00 €
W magazynie - wysyłka w ciągu 1-2 dni
Sensor module rack extension to lift up HR-MP racks to a total height of 150 mm. Length 60 mm.
Długość | 60 mm |
Średnica | 19,5 mm |
1 690,00 €
W magazynie - wysyłka w ciągu 1-2 dni
The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
Kompatybilność płyty |
KB-400/400 KB-UNIVL |
650,00 €
W magazynie - wysyłka w ciągu 1-2 dni
Medium force probe module of the compact 6-way touch trigger probe HP-THDe.
Sonda Powiązana | HP-THDe |
Kompatybilność korpus sondy |
HP-THD-B HP-THDe-B |
Kierunki próbkowania | ± X, ± Y, ± Z |
Mocowanie sondy | M8 |
Mocowanie Trzpienia | M2 |
4 220,00 €
W magazynie - wysyłka w ciągu 1-2 dni
Kit consisting of a 6-Port probe module changer rack (H = 150 mm) and a HP-TMe probe kit 2 (1x HP-TBe Probe Body, 2x HP-TMe-SF Probe Module).
Ilość Portów | 6 |
Wysokość | 150 mm |
Osłona zabezpieczjąca | Tak |
Zawartość zestawu |
1x HR-MP6-150 Probe Module Rack 1x HP-TBe Korpus sondy 2x Moduł sondy HP-TMe-SF |
155,00 €
W magazynie - wysyłka w ciągu 1-2 dni
Stylus changer port for scanning sensor HP-S-X3.
Ilość Portów | 1 |
Sonda Powiązana | HP-S-X3 |
1 590,00 €
W magazynie - wysyłka w ciągu 1-2 dni
TKJ to M8 adapter made of carbon fibre and stainless steel with a length of 450 mm
Połączenie | TKJ / M8 |
Długość (L) | 450 mm |
Materiał | Włókno Węglowe / Stal Nierdzewna |
Dodano do Twojego koszyka.
Dostępność produktu przez lokalizację placówki
Godziny