W ramach naszych nowych aktualizacji dotyczących bezpieczeństwa prosimy o zresetowanie hasła
Wybierz swój kraj lub region
- Austria
- Bosnia
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Lithuana
- Luxembourg
- Latvia
- Netherlands
- Norway
- Poland
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
- Serbia
- Switzerland
- United Kingdom
Universal Joint
ID: FX-UNI__JOINT
86,00 €
W magazynie - wysyłka w ciągu 1-2 dni
Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
| Gwint | M8 |
Slider Block (M8)
ID: FX-SLIDER
23,00 €
W magazynie - wysyłka w ciągu 1-2 dni
A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
| Gwint | M8 |
Articulated Fixture Arm (M8)
ID: FX-ARM
79,00 €
W magazynie - wysyłka w ciągu 1-2 dni
The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
| Gwint | M8 |
Flexible Vice
ID: FV-SLIDE
246,00 €
W magazynie - wysyłka w ciągu 1-2 dni
Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
| Gwint | M4 |
Vee Locator
ID: FX-VEE
70,00 €
W magazynie - wysyłka w ciągu 1-2 dni
The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
| Gwint | M8 |
Resting Cone (M8)
ID: FX-CONE
19,00 €
W magazynie - wysyłka w ciągu 1-2 dni
The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
| Gwint | M8 |
Angle Block Slider (M4)
ID: FV-ANGSLIDER
18,00 €
W magazynie - wysyłka w ciągu 1-2 dni
The angle block slider enables users to position elements horizontally on the base plate.
| Gwint | M4 |
Corner Bracket
ID: FV-CNRBRKT
47,00 €
W magazynie - wysyłka w ciągu 1-2 dni
The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Vee Locator
ID: FV-FEMALE
24,00 €
W magazynie - wysyłka w ciągu 1-2 dni
Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Support Stop
ID: FX-SUP__STOP
79,00 €
W magazynie - wysyłka w ciągu 1-2 dni
The support stop allows the user to apply a positive clamping force with variable pressure.
| Gwint | M8 |
Centering Pin
ID: FV-MALE
19,00 €
W magazynie - wysyłka w ciągu 1-2 dni
Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
| Gwint | M4 |
Vee Block Single
ID: FV-VEE
28,00 €
W magazynie - wysyłka w ciągu 1-2 dni
The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
Resting Cone (M4)
ID: FV-CONE
12,00 €
W magazynie - wysyłka w ciągu 1-2 dni
The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
| Gwint | M4 |
Swift-Fix Tool Kit
ID: FX-TOOLS
24,00 €
W magazynie - wysyłka w ciągu 1-2 dni
The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
Cone Adjustable (M4)
ID: FV-CONEADJ
13,00 €
W magazynie - wysyłka w ciągu 1-2 dni
The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
| Gwint | M4 |
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
16,00 €
W magazynie - wysyłka w ciągu 1-2 dni
Cap screws are used to mount Swift-Fix components on the base plate.
| Gwint | M8 |
Cap Screw Set M8 (L = 20 mm)
ID: FX-CAPM8__20
16,00 €
W magazynie - wysyłka w ciągu 1-2 dni
Cap screws are used to mount Swift-Fix components on the base plate.
| Gwint | M8 |
Thumb Screw M8
ID: FX-THUMB
9,00 €
W magazynie - wysyłka w ciągu 1-2 dni
With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
| Gwint | M8 |
Baseplate Retaining Screw (M8)
ID: FX-BPRTR
5,00 €
W magazynie - wysyłka w ciągu 1-2 dni
Retaining screws secure base plates on the machine table and make it simple to mount multiple plates next to each other.
| Gwint | M8 |
Vee Block Twin
ID: FV-VEETWIN
40,00 €
W magazynie - wysyłka w ciągu 1-2 dni
The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Dodano do Twojego koszyka.
Dostępność produktu przez lokalizację placówki
Godziny