Kinematic Fixture Plate 300x300mm (Plain)
ID: KPP-300__300
470,00 €
Disponibile - Spedizione in 1-2 Giorni
The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
Compatibilità piastra di fissaggio |
KB-250/250 KB-UNIVL |
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
840,00 €
Disponibile - Spedizione in 1-2 Giorni
This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
Kinematic Fixture Plate 500x500mm (Plain)
ID: KPP-500__500
720,00 €
Disponibile - Spedizione in 1-2 Giorni
The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
Compatibilità piastra di fissaggio |
KB-400/400 KB-UNIVL |
Tension Clamp (L = 39 mm)
ID: FX-CTSML
29,00 €
Disponibile - Spedizione in 1-2 Giorni
Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Vee Locator
ID: FV-FEMALE
24,00 €
Disponibile - Spedizione in 1-2 Giorni
Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Vee Block Twin
ID: FV-VEETWIN
40,00 €
Disponibile - Spedizione in 1-2 Giorni
The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Spring Clamp (M8)
ID: FX-SPRING
48,00 €
Disponibile - Spedizione in 1-2 Giorni
Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
224,00 €
Disponibile - Spedizione in 1-2 Giorni
The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
Compatibilità piastra di fissaggio |
FV-BP200/200C FV-BP200/200F FV-BP200/200P |
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
9,00 €
Disponibile - Spedizione in 1-2 Giorni
Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
Lunghezza |
20 mm |
Diametro |
8 mm |
Cone Adjustable (M4)
ID: FV-CONEADJ
13,00 €
Disponibile - Spedizione in 1-2 Giorni
The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
15,00 €
Disponibile - Spedizione in 1-2 Giorni
Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
Lunghezza |
20 mm |
Diametro |
16 mm |
Hinge Pivot With Handle
ID: FX-PR30HINGE
45,00 €
Disponibile - Spedizione in 1-2 Giorni
The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Tension Clamp (L = 66 mm)
ID: FX-CTMED
29,00 €
Disponibile - Spedizione in 1-2 Giorni
Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
660,00 €
Disponibile - Spedizione in 1-2 Giorni
This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
22,00 €
Disponibile - Spedizione in 1-2 Giorni
Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
Lunghezza |
100 mm |
Diametro |
16 mm |
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
51,00 €
Disponibile - Spedizione in 1-2 Giorni
The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
Dimensione |
120 x 45 x 12 mm |
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
1.040,00 €
Disponibile - Spedizione in 1-2 Giorni
The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
Filetto |
M8 |
Applicazione |
CMM Bracci di misura portatili |
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
30,00 €
Disponibile - Spedizione in 1-2 Giorni
The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
Lunghezza |
10 mm |
Diametro |
8 mm |
Kinematic Fixture Plate 300x300 mm (M8)
ID: KPT-300__300
740,00 €
Disponibile - Spedizione in 1-2 Giorni
The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
Compatibilità piastra di fissaggio |
KB-250/250 KB-UNIVL |
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
920,00 €
Disponibile - Spedizione in 1-2 Giorni
The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
Filetto |
M8 |
Applicazione |
CMM Bracci di misura portatili |