Kinematic Fixture Plate 500x500mm (Plain)
ID: KPP-500__500
720,00 €
Disponibile - Spedizione in 1-2 Giorni
The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
Compatibilità piastra di fissaggio |
KB-400/400 KB-UNIVL |
Tension Clamp (L = 39 mm)
ID: FX-CTSML
29,00 €
Disponibile - Spedizione in 1-2 Giorni
Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Spring Nut (M8)
ID: FX-M8SPRGNUT
29,00 €
Disponibile - Spedizione in 1-2 Giorni
Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
30,00 €
Disponibile - Spedizione in 1-2 Giorni
The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
Lunghezza |
10 mm |
Diametro |
8 mm |
Spring Pusher Standoff Clamp (D=20mm / L=20mm)
ID: FX-LATLGE
57,00 €
Disponibile - Spedizione in 1-2 Giorni
The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
Lunghezza |
20 mm |
Diametro |
20 mm |
Slider Block (M4)
ID: FV-SLIDER
14,00 €
Disponibile - Spedizione in 1-2 Giorni
A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
860,00 €
Disponibile - Spedizione in 1-2 Giorni
The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
Filetto |
M4 |
Applicazione |
Multisensor CMM |
Vee Locator
ID: FX-VEE
70,00 €
Disponibile - Spedizione in 1-2 Giorni
The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
660,00 €
Disponibile - Spedizione in 1-2 Giorni
This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
51,00 €
Disponibile - Spedizione in 1-2 Giorni
The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
Dimensione |
120 x 45 x 12 mm |
Standoff Support (M4)
ID: FV-SOSUP
13,00 €
Disponibile - Spedizione in 1-2 Giorni
The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
Lunghezza |
6 mm |
Diametro |
8 mm |
Pillar Kit
ID: FX-PILLAR__KIT
930,00 €
Disponibile - Spedizione in 1-2 Giorni
The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
Pillar 30x30x250mm
ID: FX-PR30__250
45,00 €
Disponibile - Spedizione in 1-2 Giorni
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
Dimensione |
30 x 30 x 250 mm |
Kinematic Base for Fixture Plate 300x300mm
ID: KB-250__250
560,00 €
Disponibile - Spedizione in 1-2 Giorni
The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
Compatibilità piastra di fissaggio |
KPP-300/300 KPT-300/300 |
Pillar 30x30x200mm
ID: FX-PR30__200
42,00 €
Disponibile - Spedizione in 1-2 Giorni
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
Dimensione |
30 x 30 x 200 mm |
Corner Bracket
ID: FV-CNRBRKT
47,00 €
Disponibile - Spedizione in 1-2 Giorni
The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
ID: FC-240AL3-NF
3.160,00 €
Tempi di consegna 10-15 Giorni
Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
Diametro esterno griffe (D1) |
240 mm |
Campo di serraggio esterno (A) |
1 - 288 mm |
Campo di serraggio interno (I) |
35 - 295 mm |
Materiale |
Alluminio |
Serrraggio (G) |
M8 |
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
13,00 €
Disponibile - Spedizione in 1-2 Giorni
The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
Lunghezza |
10 mm |
Diametro |
8 mm |
Toggle Clamp
ID: FX-TOG
102,00 €
Disponibile - Spedizione in 1-2 Giorni
Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.
Resting Cone (M4)
ID: FV-CONE
12,00 €
Disponibile - Spedizione in 1-2 Giorni
The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.