Skip to content Skip to navigation menu
Hexagons COVID-19 Support & Response | Official Statement

Select your country or region

Map Europe

Map Americas

  • 2
  • 3(current)
  • 4
102 Product(s) found
  • Kinematic Base for Fixture Plate 300x300mm Kinematic Base for Fixture Plate 300x300mm ID: KB-250__250
    530,00 €

    In Stock - Despatched 1-2 Days

    The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
    Plate Compatibility KPP-300/300 
    KPT-300/300 
  • Standoff Pin (D = 8 mm / L = 10 mm) Standoff Pin (D = 8 mm / L = 10 mm) ID: FV-SO__PIN
    11,00 €

    In Stock - Despatched 1-2 Days

    The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
    Length 10 mm 
    Diameter 8 mm 
  • Slider Block (M8) Slider Block (M8) ID: FX-SLIDER
    22,00 €

    In Stock - Despatched 1-2 Days

    A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
    Thread M8 
  • Corner Bracket Corner Bracket ID: FV-CNRBRKT
    45,00 €

    In Stock - Despatched 1-2 Days

    The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Tension Post (M4) Tension Post (M4) ID: FV-POST
    13,00 €

    In Stock - Despatched 1-2 Days

    This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
    Thread M4 
  • Spring Plunger Spring Plunger ID: FX-PLUNGER
    82,00 €

    In Stock - Despatched 1-2 Days

    The spring plunger exerts low forces to hold sensible parts in position.
    Thread M8 
  • Acryl Baseplate 200x200x10mm (M4) - Full Pattern Acryl Baseplate 200x200x10mm (M4) - Full Pattern ID: FV-BP200__200F
    305,00 €

    In Stock - Despatched 1-2 Days

    Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
    Thread M4 
  • Kinematic Base for Fixture Plate 400x400mm Kinematic Base for Fixture Plate 400x400mm ID: KB-300__300
    583,00 €

    In Stock - Despatched 1-2 Days

    The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
    Plate Compatibility KPP-400/400 
    KPT-400/400 
  • Standoff Magnet  (D = 8 mm / L = 10 mm) Standoff Magnet (D = 8 mm / L = 10 mm) ID: FV-SO__MAG
    12,00 €

    In Stock - Despatched 1-2 Days

    The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
    Length 10 mm 
    Diameter 8 mm 
  • Spring Clamp (M4) Spring Clamp (M4) ID: FV-SPRING
    42,00 €

    In Stock - Despatched 1-2 Days

    Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
    Thread M4 
  • Toggle Clamp Toggle Clamp ID: FX-TOG
    97,00 €

    In Stock - Despatched 1-2 Days

    Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.
    Thread M8 
  • 6-Jaw Chuck with Flange (Aluminium / D = 160 mm) 6-Jaw Chuck with Flange (Aluminium / D = 160 mm) ID: FC-160AL6
    1 350,00 €

    In Stock - Despatched 1-2 Days

    Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
    Outside Diameter Chuck (D1) 160 mm
    Clamping Range 5 - 196 mm
    Material Aluminium 
    Fixing M4 / M8 
  • 3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm) 3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm) ID: FC-160SS3
    1 350,00 €

    In Stock - Despatched 1-2 Days

    Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
    Outside Diameter Chuck (D1) 160 mm
    Clamping Range Outside (A) 1 - 150 mm
    Clamping Range Inside (I) 34 - 174 mm
    Material Stainless Steel 
    Fixing M4 / M8 
  • 3-Jaw Chuck without Flange (Stainless Steel / D=70 mm) 3-Jaw Chuck without Flange (Stainless Steel / D=70 mm) ID: FC-70SS3-NF
    830,00 €

    Delivery time 10-15 days

    Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
    Outside Diameter Chuck (D1) 70 mm
    Clamping Range Outside (A) 1 - 71 mm
    Clamping Range Inside (I) 18 - 66 mm
    Material Stainless Steel 
    Fixing (G) M3 
  • 6-Jaw Chuck without Flange (Aluminium / D=160 mm) 6-Jaw Chuck without Flange (Aluminium / D=160 mm) ID: FC-160AL6-NF
    1 280,00 €

    Delivery time 10-15 days

    Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
    Outside Diameter Chuck (D1) 160 mm
    Clamping Range 5 - 196 mm
    Material Aluminium 
    Fixing (G) M6 
  • Standoff (D = 8 mm / L = 20 mm) Standoff (D = 8 mm / L = 20 mm) ID: FV-SO8__20
    9,00 €

    In Stock - Despatched 1-2 Days

    Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Length 20 mm 
    Diameter 8 mm 
  • Standoff (D = 16 mm / L = 20 mm) Standoff (D = 16 mm / L = 20 mm) ID: FX-SO16__20
    14,00 €

    In Stock - Despatched 1-2 Days

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Length 20 mm 
    Diameter 16 mm 
  • Hinge Pivot With Handle Hinge Pivot With Handle ID: FX-PR30HINGE
    43,00 €

    In Stock - Despatched 1-2 Days

    The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Fixture Baseplate 300x300x12mm (M8) Fixture Baseplate 300x300x12mm (M8) ID: FX-BP300__300
    625,00 €

    In Stock - Despatched 1-2 Days

    This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
    Thread M8 
  • Spring Pusher Standoff Clamp (D=8mm / L=10mm) Spring Pusher Standoff Clamp (D=8mm / L=10mm) ID: FV-LATSML
    29,00 €

    In Stock - Despatched 1-2 Days

    The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
    Length 10 mm 
    Diameter 8 mm 
    • 2
    • 3(current)
    • 4