Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
€ 14,00
In Stock - Despatched 1-2 Days
Cap screws are used to mount Swift-Fix components on the base plate.
| Thread | M8 |
Tension Clamp (L = 66 mm)
ID: FX-CTMED
€ 27,00
In Stock - Despatched 1-2 Days
Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Kinematic Base for Fixture Plate 500x500mm
ID: KB-400__400
€ 720,00
In Stock - Despatched 1-2 Days
The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
| Plate Compatibility |
KPP-500/500 KPT-500/500 |
Kinematic Base for Fixture Plate 400x400mm
ID: KB-300__300
€ 555,00
In Stock - Despatched 1-2 Days
The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
| Plate Compatibility |
KPP-400/400 KPT-400/400 |
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
€ 203,00
In Stock - Despatched 1-2 Days
The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
€ 28,00
In Stock - Despatched 1-2 Days
The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
| Length | 10 mm |
| Diameter | 8 mm |
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
€ 11,00
In Stock - Despatched 1-2 Days
The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
| Length | 10 mm |
| Diameter | 8 mm |
Tension Post (M4)
ID: FV-POST
€ 12,00
In Stock - Despatched 1-2 Days
This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
| Thread | M4 |
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
€ 36,00
In Stock - Despatched 1-2 Days
The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
| Length | 20 mm |
| Diameter | 16 mm |
Spring Pusher Standoff Clamp (D=20mm / L=20mm)
ID: FX-LATLGE
€ 51,00
In Stock - Despatched 1-2 Days
The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
| Length | 20 mm |
| Diameter | 20 mm |
Articulated Fixture Arm (M8)
ID: FX-ARM
€ 71,00
In Stock - Despatched 1-2 Days
The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
| Thread | M8 |
Flexible Vice
ID: FV-SLIDE
€ 223,00
In Stock - Despatched 1-2 Days
Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
| Thread | M4 |
Pillar 30x30x100mm
ID: FX-PR30__100
€ 32,00
In Stock - Despatched 1-2 Days
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
| Size | 30 x 30 x 100 mm |
Kinematic Support Kit
ID: FX-KINKIT
€ 216,00
In Stock - Despatched 1-2 Days
The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
Kinematic Support Kit Plus
ID: FX-KINKITPLUS
€ 230,00
In Stock - Despatched 1-2 Days
The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
Spring Clamp (M8)
ID: FX-SPRING
€ 44,00
In Stock - Despatched 1-2 Days
Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Slider Block (M8)
ID: FX-SLIDER
€ 21,00
In Stock - Despatched 1-2 Days
A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
| Thread | M8 |
Cap Screw Set M8 (L = 20 mm)
ID: FX-CAPM8__20
€ 14,00
In Stock - Despatched 1-2 Days
Cap screws are used to mount Swift-Fix components on the base plate.
| Thread | M8 |
Universal Clamp (M8)
ID: FX-CLAMP
€ 92,00
In Stock - Despatched 1-2 Days
The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
| Thread | M8 |
Angle Block Slider (M4)
ID: FV-ANGSLIDER
€ 16,00
In Stock - Despatched 1-2 Days
The angle block slider enables users to position elements horizontally on the base plate.
| Thread | M4 |
Added to your shopping cart.
Product availability by store location
Hours