Skip to content Skip to navigation menu
As part of our new security upgrades, you are requested to reset your password
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
ID: FC-240AL3-NF
Price:  3 160,00 €
Quick Overview:  Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Outside Diameter Chuck (D1):  240mm
  • Clamping Range Outside (A):  1 - 288mm
  • Clamping Range Inside (I):  35 - 295mm
  • Material:  Aluminium
  • Fixing (G):  M8
Delivery time 10-15 days
SWIFT-CHECK
ID: GB0096-2001
Price:  5 270,00 €
Quick Overview:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • CMM Compatibility:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Software Compatibility:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Times:  Length Check: 20 Minutes, Ring Check: 5 Minutes, Sphere Check: 5 Minutes, Wrist- / Probe Head Check: 10 Minutes
  • Dimensions:  Length Bar Length = 300 mm, Ring Gauge Diameter = 25 mm, Sphere Diameter = 25 mm
Delivery time 10-15 days
SWIFT-SET
ID: GB0122-1000
Price:  8 140,00 €
Quick Overview:  Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon’s HP-S-X tactile scanning sensors.
  • Compatibility:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Delivery time 10-15 days
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Price:  466,00 €
Quick Overview:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40mm
Delivery time 10-15 days
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Price:  540,00 €
Quick Overview:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60mm
Delivery time 10-15 days
Pillar Top Plate  (10 x M8)
ID: FX-SUB45__120
Price:  54,00 €
Quick Overview:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Size:  120 x 45 x 12 mm
In Stock - Despatched 1-2 Days
Standoff (D = 20 mm / L = 30 mm)
ID: FX-SO20__30
Price:  16,00 €
Quick Overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  30 mm
  • Diameter:  20 mm
In Stock - Despatched 1-2 Days
Toggle Clamp
ID: FX-TOG
Price:  107,00 €
Quick Overview:  Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.
  • Thread:  M8
In Stock - Despatched 1-2 Days
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
ID: FC-160SS3-NF
Price:  1 360,00 €
Quick Overview:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Outside Diameter Chuck (D1):  160mm
  • Clamping Range Outside (A):  1 - 150mm
  • Clamping Range Inside (I):  34 - 174mm
  • Material:  Stainless Steel
  • Fixing (G):  M6
Delivery time 10-15 days
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Price:  884,00 €
Quick Overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Thread:  M8
In Stock - Despatched 1-2 Days
Hinge Pivot With Handle
ID: FX-PR30HINGE
Price:  47,00 €
Quick Overview:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
In Stock - Despatched 1-2 Days
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Price:  695,00 €
Quick Overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Thread:  M8
In Stock - Despatched 1-2 Days
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Price:  23,00 €
Quick Overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  100 mm
  • Diameter:  16 mm
In Stock - Despatched 1-2 Days
Kinematic Base for Fixture Plate 400x400mm
ID: KB-300__300
Price:  642,00 €
Quick Overview:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Plate Compatibility:  KPP-400/400, KPT-400/400
In Stock - Despatched 1-2 Days
HR-X1-P-SF Stylus Changer Port
ID: M00-114-167-000
Price:  370,00 €
Quick Overview:  Stylus changer port with cover for scanning sensors HP-S-X1S, HP-S-X1H and HP-S-X1C.
  • Port Quantity:  1
  • Related Probe:  HP-S-X1S, HP-S-X1H, HP-S-X1C
In Stock - Despatched 1-2 Days
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Price:  1 095,00 €
Quick Overview:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Thread:  M8
  • Application:  CMM, Portable Measuring Arm
In Stock - Despatched 1-2 Days
Universal Joint
ID: FX-UNI__JOINT
Price:  91,00 €
Quick Overview:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Thread:  M8
In Stock - Despatched 1-2 Days
Standoff (D = 20 mm / L = 50 mm)
ID: FX-SO20__50
Price:  17,00 €
Quick Overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  50 mm
  • Diameter:  20 mm
In Stock - Despatched 1-2 Days
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Price:  1 160,00 €
Quick Overview:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Outside Diameter Chuck (D1):  125mm
  • Clamping Range:  5 - 156mm
  • Material:  Aluminium
  • Fixing:  M4 / M8
In Stock - Despatched 1-2 Days
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
ID: FC-160AL6
Price:  1 430,00 €
Quick Overview:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Outside Diameter Chuck (D1):  160mm
  • Clamping Range:  5 - 196mm
  • Material:  Aluminium
  • Fixing:  M4 / M8
In Stock - Despatched 1-2 Days