text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen

Kies uw land of regio

  • 1(current)
  • 2
  • 3
166 product(en) gevonden
  • Safety Pin for HR-MP Rack Safety Pin for HR-MP Rack ID: 03969488
    49,00 €

    Op voorraad - verzending 1-2 dagen

    Safety / locking pin for the 3-port probe module and arm of the rack
    Lengte 22 mm
    Diameter 8 mm
  • Vee Locator Vee Locator ID: FV-FEMALE
    24,00 €

    Op voorraad - verzending 1-2 dagen

    Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Standoff (D = 16 mm / L = 20 mm) Standoff (D = 16 mm / L = 20 mm) ID: FX-SO16__20
    15,00 €

    Op voorraad - verzending 1-2 dagen

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Lengte 20 mm 
    Diameter 16 mm 
  • Hinge Pivot With Handle Hinge Pivot With Handle ID: FX-PR30HINGE
    45,00 €

    Op voorraad - verzending 1-2 dagen

    The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Fixture Baseplate 300x300x12mm (M8) Fixture Baseplate 300x300x12mm (M8) ID: FX-BP300__300
    660,00 €

    Op voorraad - verzending 1-2 dagen

    This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
    Schroefdraad M8 
  • Pillar Top Plate  (10 x M8) Pillar Top Plate (10 x M8) ID: FX-SUB45__120
    51,00 €

    Op voorraad - verzending 1-2 dagen

    The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
    Grootte 120 x 45 x 12 mm 
  • Support Stop Support Stop ID: FX-SUP__STOP
    79,00 €

    Op voorraad - verzending 1-2 dagen

    The support stop allows the user to apply a positive clamping force with variable pressure.
    Schroefdraad M8 
  • Pillar 30x30x150mm Pillar 30x30x150mm ID: FX-PR30__150
    39,00 €

    Op voorraad - verzending 1-2 dagen

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
    Grootte 30 x 30 x 150 mm 
  • Standoff Support (M4) Standoff Support (M4) ID: FV-SOSUP
    13,00 €

    Op voorraad - verzending 1-2 dagen

    The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
    Lengte 6 mm 
    Diameter 8 mm 
  • Pillar Kit Pillar Kit ID: FX-PILLAR__KIT
    930,00 €

    Op voorraad - verzending 1-2 dagen

    The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
  • Standoff Adjustable (M8) Standoff Adjustable (M8) ID: FX-HEIGHT
    56,00 €

    Op voorraad - verzending 1-2 dagen

    The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
    Lengte 50 mm 
    Diameter 16 mm 
  • Centering Pin Centering Pin ID: FV-MALE
    19,00 €

    Op voorraad - verzending 1-2 dagen

    Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
    Schroefdraad M4 
  • Flexible Vice Flexible Vice ID: FV-SLIDE
    246,00 €

    Op voorraad - verzending 1-2 dagen

    Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
    Schroefdraad M4 
  • Kinematic Support Kit Kinematic Support Kit ID: FX-KINKIT
    238,00 €

    Op voorraad - verzending 1-2 dagen

    The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
  • Resting Cone (M8) Resting Cone (M8) ID: FX-CONE
    19,00 €

    Op voorraad - verzending 1-2 dagen

    The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
    Schroefdraad M8 
  • Pillar Base Plate Pillar Base Plate ID: FX-PR30PLATE
    45,00 €

    Op voorraad - verzending 1-2 dagen

    The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
    Grootte 130 x 30 mm 
  • Pillar 30x30x100mm Pillar 30x30x100mm ID: FX-PR30__100
    36,00 €

    Op voorraad - verzending 1-2 dagen

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
    Grootte 30 x 30 x 100 mm 
  • Pillar 30x30x250mm Pillar 30x30x250mm ID: FX-PR30__250
    45,00 €

    Op voorraad - verzending 1-2 dagen

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
    Grootte 30 x 30 x 250 mm 
  • Kinematic Base for Fixture Plate 300x300mm Kinematic Base for Fixture Plate 300x300mm ID: KB-250__250
    560,00 €

    Op voorraad - verzending 1-2 dagen

    The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
    Basisplaat comptabiliteit KPP-300/300 
    KPT-300/300 
  • Pillar 30x30x200mm Pillar 30x30x200mm ID: FX-PR30__200
    42,00 €

    Op voorraad - verzending 1-2 dagen

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
    Grootte 30 x 30 x 200 mm 
    • 1(current)
    • 2
    • 3