text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
  1. Accueil
  2. Catalogue
  3. MMT
  4. Bridages

Bridages

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SKU: GB0122-0019
Prix:  2.064,00 zł
Vue d'ensemble sommaire:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Codice prodotto:  GB0122-0019
  • Compatibilità:  HP-S-X3 Stylus Clampings
  • Diametro:  40mm
Available
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SKU: GB0122-0008
Prix:  2.408,00 zł
Vue d'ensemble sommaire:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Codice prodotto:  GB0122-0008
  • Compatibilità:  HP-S-X1 Stylus Clampings
  • Diametro:  60mm
Available
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
SKU: FC-125SS3
Prix:  5.246,00 zł
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-125SS3
  • Diametro esterno griffe (D1):  125mm
  • Campo di serraggio esterno (A):  1 - 126mm
  • Campo di serraggio interno (I):  32 - 122mm
  • Materiale:  Acciaio inossidabile
En stock
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
SKU: FC-125AL6
Prix:  5.246,00 zł
Vue d'ensemble sommaire:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-125AL6
  • Diametro esterno griffe (D1):  125mm
  • Campo di serraggio:  5 - 156mm
  • Materiale:  Alluminio
  • Serrraggio:  M4 / M8
En stock
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
SKU: FC-160AL6
Prix:  6.407,00 zł
Vue d'ensemble sommaire:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-160AL6
  • Diametro esterno griffe (D1):  160mm
  • Campo di serraggio:  5 - 196mm
  • Materiale:  Alluminio
  • Serrraggio:  M4 / M8
En stock
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
SKU: FC-125AL6-NF
Prix:  4.902,00 zł
Vue d'ensemble sommaire:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-125AL6-NF
  • Diametro esterno griffe (D1):  125mm
  • Campo di serraggio:  5 - 156mm
  • Materiale:  Alluminio
  • Serrraggio (G):  M5
Available
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
SKU: FC-160AL6-NF
Prix:  $1,834.00
Vue d'ensemble sommaire:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-160AL6-NF
  • Diametro esterno griffe (D1):  160mm
  • Campo di serraggio:  5 - 196mm
  • Materiale:  Alluminio
  • Serrraggio (G):  M6
Available
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
SKU: FC-125SS3-NF
Prix:  $1,399.00
Vue d'ensemble sommaire: 

3-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-125SS3-NF
  • Diametro esterno griffe (D1):  125mm
  • Campo di serraggio esterno (A):  1 - 126mm
  • Campo di serraggio interno (I):  32 - 122mm
  • Materiale:  Acciaio inossidabile
Available
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
SKU: FX-BP300__400
Prix:  $1,078.00
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP300/400
  • Filetto:  M8
En stock
Vee Locator
Vee Locator
SKU: FV-FEMALE
Prix:  $38.00
Vue d'ensemble sommaire:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Codice prodotto:  FV-FEMALE
En stock
Vee Block Twin
Vee Block Twin
SKU: FV-VEETWIN
Prix:  $55.00
Vue d'ensemble sommaire:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Codice prodotto:  FV-VEETWIN
En stock
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
SKU: FV-GUIDE480
Prix:  $294.00
Vue d'ensemble sommaire:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Codice prodotto:  FV-GUIDE480
  • Compatibilità piastra di fissaggio:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
En stock
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
SKU: FV-SO8__20
Prix:  $13.00
Vue d'ensemble sommaire:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FV-SO8/20
  • Lunghezza:  20 mm
  • Diametro:  8 mm
En stock
Cone Adjustable (M4)
Cone Adjustable (M4)
SKU: FV-CONEADJ
Prix:  $20.00
Vue d'ensemble sommaire:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Codice prodotto:  FV-CONEADJ
  • Filetto:  M4
En stock
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
SKU: FX-BP300__300
Prix:  $869.00
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP300/300
  • Filetto:  M8
En stock
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
SKU: FV-LATSML
Prix:  $42.00
Vue d'ensemble sommaire:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Codice prodotto:  FV-LATSML
  • Lunghezza:  10 mm
  • Diametro:  8 mm
En stock
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
SKU: FV-SO8__25
Prix:  $13.00
Vue d'ensemble sommaire:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FV-SO8/25
  • Lunghezza:  25 mm
  • Diametro:  8 mm
En stock
Hinge Pivot With Handle
Hinge Pivot With Handle
SKU: FX-PR30HINGE
Prix:  $94.00
Vue d'ensemble sommaire:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Codice prodotto:  FX-PR30HINGE
En stock
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
SKU: FX-BP400__400
Prix:  $1,221.00
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP400/400
  • Filetto:  M8
En stock
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
SKU: FX-BP400__600
Prix:  $2,090.00
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP400/600
  • Filetto:  M8
En stock