HR-X3-P Stylus Changer Port
ID: M00-114-109-000
155,00 €
Disponibile - Spedizione in 1-2 Giorni
Stylus changer port for scanning sensor HP-S-X3.
Numero di porte |
1 |
Sensore compatibile |
HP-S-X3 |
HR-X1-P-SF Stylus Changer Port
ID: M00-114-167-000
359,00 €
Disponibile - Spedizione in 1-2 Giorni
Stylus changer port with cover for scanning sensors HP-S-X1S, HP-S-X1H and HP-S-X1C.
Numero di porte |
1 |
Sensore compatibile |
HP-S-X1S HP-S-X1H HP-S-X1C |
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
224,00 €
Disponibile - Spedizione in 1-2 Giorni
The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
Compatibilità piastra di fissaggio |
FV-BP200/200C FV-BP200/200F FV-BP200/200P |
Standoff Support (M8)
ID: FX-SO__SUPP
19,00 €
Disponibile - Spedizione in 1-2 Giorni
The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
Lunghezza |
10 mm |
Diametro |
15 mm |
HR-SB Standard Base for HR-MP Rack
ID: 03939493
221,00 €
Disponibile - Spedizione in 1-2 Giorni
Standard base with standard cylinder, standard fixation piece and mounting equipment
Protezione da collisioni |
No |
Ricalibrazione automatica |
No |
HR-MP Accurate Base and Crash Protection Kit
ID: 03939497
1.540,00 €
Disponibile - Spedizione in 1-2 Giorni
Kit with accurate base
and crash protection
Protezione da collisioni |
Si |
Ricalibrazione automatica |
Si |
Spring Pusher Standoff Clamp (D=20mm / L=20mm)
ID: FX-LATLGE
57,00 €
Disponibile - Spedizione in 1-2 Giorni
The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
Lunghezza |
20 mm |
Diametro |
20 mm |
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
ID: FC-240AL3-NF
3.160,00 €
Tempi di consegna 10-15 Giorni
Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
Diametro esterno griffe (D1) |
240 mm |
Campo di serraggio esterno (A) |
1 - 288 mm |
Campo di serraggio interno (I) |
35 - 295 mm |
Materiale |
Alluminio |
Serrraggio (G) |
M8 |
Kinematic Fixture Plate 500x500mm (Plain)
ID: KPP-500__500
720,00 €
Disponibile - Spedizione in 1-2 Giorni
The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
Compatibilità piastra di fissaggio |
KB-400/400 KB-UNIVL |
Tension Clamp (L = 39 mm)
ID: FX-CTSML
29,00 €
Disponibile - Spedizione in 1-2 Giorni
Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
30,00 €
Disponibile - Spedizione in 1-2 Giorni
The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
Lunghezza |
10 mm |
Diametro |
8 mm |
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
920,00 €
Disponibile - Spedizione in 1-2 Giorni
The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
Filetto |
M8 |
Applicazione |
CMM Bracci di misura portatili |
Tension Post (M8)
ID: FX-POST
24,00 €
Disponibile - Spedizione in 1-2 Giorni
This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
Standoff (D = 20 mm / L = 20 mm)
ID: FX-SO20__20
15,00 €
Disponibile - Spedizione in 1-2 Giorni
Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
Lunghezza |
20 mm |
Diametro |
20 mm |
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
860,00 €
Disponibile - Spedizione in 1-2 Giorni
The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
Filetto |
M4 |
Applicazione |
Multisensor CMM |
Universal Joint
ID: FX-UNI__JOINT
86,00 €
Disponibile - Spedizione in 1-2 Giorni
Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
Standoff (D = 16 mm / L = 30 mm)
ID: FX-SO16__30
15,00 €
Disponibile - Spedizione in 1-2 Giorni
Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
Lunghezza |
30 mm |
Diametro |
16 mm |
Slider Block (M8)
ID: FX-SLIDER
23,00 €
Disponibile - Spedizione in 1-2 Giorni
A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
Articulated Fixture Arm (M8)
ID: FX-ARM
79,00 €
Disponibile - Spedizione in 1-2 Giorni
The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
Spring Clamp (M4)
ID: FV-SPRING
44,00 €
Disponibile - Spedizione in 1-2 Giorni
Spring Clamps are used to clamp parts with low force without obstructing the measurement access.