Hexagons COVID-19 Support & Response | Official Statement
Scegliere il paese o la regione
- Austria
- Bosnia
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Lithuana
- Luxembourg
- Latvia
- Netherlands
- Norway
- Poland
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
- Serbia
- Switzerland
- United Kingdom
Centering Pin
ID: FV-MALE
18,00 CHF
Disponibile - Spedizione in 1-2 Giorni
Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
| Filetto | M4 |
Vee Locator
ID: FV-FEMALE
23,00 CHF
Disponibile - Spedizione in 1-2 Giorni
Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Hinge Pivot With Handle
ID: FX-PR30HINGE
43,00 CHF
Disponibile - Spedizione in 1-2 Giorni
The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Standoff Magnet (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
18,00 CHF
Disponibile - Spedizione in 1-2 Giorni
The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
| Lunghezza | 20 mm |
| Diametro | 16 mm |
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
11,00 CHF
Disponibile - Spedizione in 1-2 Giorni
The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
| Lunghezza | 10 mm |
| Diametro | 8 mm |
Standoff Pin M8 (D= 16 mm/L= 20 mm)
ID: FX-SO__PIN
18,00 CHF
Disponibile - Spedizione in 1-2 Giorni
The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
| Lunghezza | 20 mm |
| Diametro | 16 mm |
Resting Cone (M4)
ID: FV-CONE
11,00 CHF
Disponibile - Spedizione in 1-2 Giorni
The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
| Filetto | M4 |
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
ID: FC-160AL6-NF
1.362,00 CHF
Tempi di consegna 10-15 Giorni
Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
| Diametro esterno griffe (D1) | 160 mm |
| Campo di serraggio | 5 - 196 mm |
| Materiale | Alluminio |
| Serrraggio (G) | M6 |
Spring Clamp (M8)
ID: FX-SPRING
46,00 CHF
Disponibile - Spedizione in 1-2 Giorni
Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
| Filetto | Without Thread |
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
38,00 CHF
Disponibile - Spedizione in 1-2 Giorni
The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
| Lunghezza | 20 mm |
| Diametro | 16 mm |
Swift-Fix Tool Kit
ID: FX-TOOLS
23,00 CHF
Disponibile - Spedizione in 1-2 Giorni
The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
Universal Kinematic Fixture Base
ID: KB-UNIVL
533,00 CHF
Disponibile - Spedizione in 1-2 Giorni
The universal kinematic base remains on the machine and ensures accurate, highly repeatable placement of kinematic fixture plates without manual alignment. It can be used with any size of kinematic fixture plates.
| Compatibilità piastra di fissaggio |
KPP-300/300 KPT-300/300 KPP-400/400 KPT-400/400 KPP-500/500 KPT-500/500 |
Pillar Base Plate
ID: FX-PR30PLATE
43,00 CHF
Disponibile - Spedizione in 1-2 Giorni
The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
| Dimensione | 130 x 30 mm |
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
1.105,00 CHF
Disponibile - Spedizione in 1-2 Giorni
Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
| Diametro esterno griffe (D1) | 125 mm |
| Campo di serraggio esterno (A) | 1 - 126 mm |
| Campo di serraggio interno (I) | 32 - 122 mm |
| Materiale | Acciaio inossidabile |
| Serrraggio | M4 / M8 |
Vee Block Twin
ID: FV-VEETWIN
38,00 CHF
Disponibile - Spedizione in 1-2 Giorni
The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
9,00 CHF
Disponibile - Spedizione in 1-2 Giorni
Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
| Lunghezza | 20 mm |
| Diametro | 8 mm |
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
15,00 CHF
Disponibile - Spedizione in 1-2 Giorni
Cap screws are used to mount Swift-Fix components on the base plate.
| Filetto | M8 |
Cap Screw Set M8 (L = 20 mm)
ID: FX-CAPM8__20
15,00 CHF
Disponibile - Spedizione in 1-2 Giorni
Cap screws are used to mount Swift-Fix components on the base plate.
| Filetto | M8 |
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
1.105,00 CHF
Disponibile - Spedizione in 1-2 Giorni
Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
| Diametro esterno griffe (D1) | 125 mm |
| Campo di serraggio | 5 - 156 mm |
| Materiale | Alluminio |
| Serrraggio | M4 / M8 |
Kinematic Base for Fixture Plate 500x500mm
ID: KB-400__400
752,00 CHF
Disponibile - Spedizione in 1-2 Giorni
The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
| Compatibilità piastra di fissaggio |
KPP-500/500 KPT-500/500 |
Aggiunto al tuo carrello.
Disponibilità del prodotto per località dello store
Ore