text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji dotyczących bezpieczeństwa prosimy o zresetowanie hasła
  1. Strona Główna
  2. Katalog
  3. WMP

WMP

HA-M Probe Extension Kit M8
HA-M Probe Extension Kit M8
ID: 03969077
Cena:  821,00 CHF
Szybki Podgląd:  Kit of three M8 Extensions (50 mm, 100 mm and 200 mm) made of aluminium and stainless steel.
  • Codice prodotto:  03969077
  • Collegamento:  M8 / M8
  • Materiale:  Alluminio / Acciaio inossidabile
W magazynie - wysyłka w ciągu 1-2 dni
HA-TT-100 Probe Extension TKJ (L = 100 mm)
HA-TT-100 Probe Extension TKJ (L = 100 mm)
ID: 03969361
Cena:  1.253,00 CHF
Szybki Podgląd:  TKJ extension made of aluminium and stainless steel with a length of 100 mm.
  • Codice prodotto:  03969361
  • Collegamento:  TKJ / TKJ
  • Lunghezza (L):  100
  • Materiale:  Alluminio / Acciaio inossidabile
W magazynie - wysyłka w ciągu 1-2 dni
HR-SP-110 Rack Extension (L = 110 mm)
HR-SP-110 Rack Extension (L = 110 mm)
ID: 03969486
Cena:  173,00 CHF
Szybki Podgląd:  Sensor module rack extension to lift up HR-MP racks to a total height of 200 mm. Length 110 mm.
  • Codice prodotto:  03969486
  • Lunghezza:  110
  • Diametro:  19.5
Dostawy > 25 dni
HR-SP-160 Rack Extension (L = 160 mm)
HR-SP-160 Rack Extension (L = 160 mm)
ID: 03969487
Cena:  173,00 CHF
Szybki Podgląd:  Sensor module rack extension to lift up HR-MP racks to a total height of 250 mm. Length 160 mm.
  • Codice prodotto:  03969487
  • Lunghezza:  160
  • Diametro:  19.5
Dostawy > 25 dni
Safety Pin for HR-MP Rack
Safety Pin for HR-MP Rack
ID: 03969488
Cena:  52,00 CHF
Szybki Podgląd:  Safety / locking pin for the 3-port probe module and arm of the rack
  • Codice prodotto:  03969488
  • Lunghezza:  22
  • Diametro:  8
Dostawy > 25 dni
HR-SP-60 Rack Extension (L = 60 mm)
HR-SP-60 Rack Extension (L = 60 mm)
ID: 03969485
Cena:  173,00 CHF
Szybki Podgląd:  Sensor module rack extension to lift up HR-MP racks to a total height of 150 mm. Length 60 mm.
  • Codice prodotto:  03969485
  • Lunghezza:  60
  • Diametro:  19.5
Dostawy > 25 dni
HR-MP6-150 Module Rack with HP-TMe Probe Kit 2
HR-MP6-150 Module Rack with HP-TMe Probe Kit 2
ID: 03939574
Cena:  4.400,00 CHF
Szybki Podgląd:  Kit consisting of a 6-Port probe module changer rack (H = 150 mm) and a HP-TMe probe kit 2 (1x HP-TBe Probe Body, 2x HP-TMe-SF Probe Module).
  • Codice prodotto:  03939574
  • Numero di porte:  6
  • Altezza:  150
  • Protezione da collisioni:  Si
  • Contenuto kit:  1x HR-MP6-150 Probe Module Rack, 1x Corpo tastatore HP-TBe, 2x Modulo portastilo HP-TMe-SF
Dostawy > 25 dni
Hexagon Diaclean (1 l)
Hexagon Diaclean (1 l)
ID: 8070-01001
Cena:  20,00 CHF
Szybki Podgląd:  Surface cleaner for Coordinate Measuring Machines (CMM).
  • Codice prodotto:  8070-01001
W magazynie - wysyłka w ciągu 1-2 dni
6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
ID: FC-125AL6
Cena:  1 318,00 €
Szybki Podgląd: 

6-jaw chuck with flange made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Codice prodotto:  FC-125AL6
  • Diametro esterno griffe (D1):  125
  • Campo di serraggio:  5 - 156
  • Materiale:  Alluminio
  • Serrraggio:  M4 / M8
W magazynie - wysyłka w ciągu 1-2 dni
6-Jaw Chuck without Flange (Aluminium / Ø 125 mm)
6-Jaw Chuck without Flange (Aluminium / Ø 125 mm)
ID: FC-125AL6-NF
Cena:  1 140,00 €
Szybki Podgląd: 

6-jaw chuck made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Codice prodotto:  FC-125AL6-NF
  • Diametro esterno griffe (D1):  125
  • Campo di serraggio:  5 - 156
  • Materiale:  Alluminio
  • Serrraggio (G):  M5
Czas dostawy 10-15 dni
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Cena:  1 004,00 €
Szybki Podgląd: 

This fixture base plate can be connected side-by-side with other base plates of the same size. M8 threaded holes and alphanumeric identification enable quick and easy fixture setup and repeatable fixture assembly.
  • Codice prodotto:  FX-BP300/400
  • Filetto:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Vee Locator
Vee Locator
ID: FV-FEMALE
Cena:  33,00 €
Szybki Podgląd:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Codice prodotto:  FV-FEMALE
W magazynie - wysyłka w ciągu 1-2 dni
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Cena:  47,00 €
Szybki Podgląd:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Codice prodotto:  FV-VEETWIN
W magazynie - wysyłka w ciągu 1-2 dni
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Cena:  279,00 €
Szybki Podgląd: 

The base plate guide rail provides precise alignment and positioning of acrylic base plates at any side of the measuring volume of a multisensor CMM.
  • Codice prodotto:  FV-GUIDE480
  • Compatibilità piastra di fissaggio:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Cena:  10,00 €
Szybki Podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FV-SO8/20
  • Filetto:  M4
  • Diametro:  8 mm
  • Lunghezza:  20 mm
W magazynie - wysyłka w ciągu 1-2 dni
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Cena:  22,00 €
Szybki Podgląd:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Codice prodotto:  FV-CONEADJ
  • Filetto:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Cena:  819,00 €
Szybki Podgląd: 

This fixture base plate can be connected side-by-side with other base plates of the same size. M8 threaded holes and alphanumeric identification enable quick and easy fixture setup and repeatable fixture assembly.
  • Codice prodotto:  FX-BP300/300
  • Filetto:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Spring Pusher Standoff Clamp (D = 8 mm / L = 10 mm)
Spring Pusher Standoff Clamp (D = 8 mm / L = 10 mm)
ID: FV-LATSML
Cena:  39,00 €
Szybki Podgląd: 

The spring-loaded standoff securely holds delicate components in position using lateral clamping force.
  • Codice prodotto:  FV-LATSML
  • Filetto:  M4
  • Diametro:  8 mm
  • Lunghezza:  10 mm
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Cena:  10,00 €
Szybki Podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FV-SO8/25
  • Filetto:  M4
  • Diametro:  8 mm
  • Lunghezza:  25 mm
W magazynie - wysyłka w ciągu 1-2 dni
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Cena:  18,00 €
Szybki Podgląd:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Codice prodotto:  FV-SOSUP
  • Filetto:  M4
  • Diametro:  8 mm
  • Lunghezza:  6 mm
W magazynie - wysyłka w ciągu 1-2 dni