Skip to content Skip to navigation menu
Hexagons COVID-19 Support & Response | Official Statement

Select your country or region

Map Europe

Map Americas

  • 1(current)
  • 2
  • 3
102 Product(s) found
  • Kinematic Fixture Plate 300x300mm (Plain) Kinematic Fixture Plate 300x300mm (Plain) ID: KPP-300__300
    €446.00

    In Stock - Despatched 1-2 Days

    The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
    Plate Compatibility KB-250/250 
    KB-UNIVL 
  • Fixture Baseplate 300x400x12mm (M8) Fixture Baseplate 300x400x12mm (M8) ID: FX-BP300__400
    €798.00

    In Stock - Despatched 1-2 Days

    This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
    Thread M8 
  • Kinematic Fixture Plate 500x500mm (Plain) Kinematic Fixture Plate 500x500mm (Plain) ID: KPP-500__500
    €683.00

    In Stock - Despatched 1-2 Days

    The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
    Plate Compatibility KB-400/400 
    KB-UNIVL 
  • Tension Clamp (L = 39 mm) Tension Clamp (L = 39 mm) ID: FX-CTSML
    €28.00

    In Stock - Despatched 1-2 Days

    Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
    Thread Without Thread 
  • Vee Locator Vee Locator ID: FV-FEMALE
    €23.00

    In Stock - Despatched 1-2 Days

    Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Vee Block Twin Vee Block Twin ID: FV-VEETWIN
    €38.00

    In Stock - Despatched 1-2 Days

    The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Spring Clamp (M8) Spring Clamp (M8) ID: FX-SPRING
    €46.00

    In Stock - Despatched 1-2 Days

    Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
    Thread Without Thread 
  • Thumb Screw M8 Thumb Screw M8 ID: FX-THUMB
    €9.00

    In Stock - Despatched 1-2 Days

    With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
    Thread M8 
  • Guide Rail (L = 480 mm) Guide Rail (L = 480 mm) ID: FV-GUIDE480
    €213.00

    In Stock - Despatched 1-2 Days

    The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
    Plate Compatibility FV-BP200/200C 
    FV-BP200/200F 
    FV-BP200/200P 
  • Standoff (D = 8 mm / L = 20 mm) Standoff (D = 8 mm / L = 20 mm) ID: FV-SO8__20
    €9.00

    In Stock - Despatched 1-2 Days

    Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Length 20 mm 
    Diameter 8 mm 
  • Cone Adjustable (M4) Cone Adjustable (M4) ID: FV-CONEADJ
    €12.00

    In Stock - Despatched 1-2 Days

    The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
    Thread M4 
  • Standoff (D = 16 mm / L = 20 mm) Standoff (D = 16 mm / L = 20 mm) ID: FX-SO16__20
    €14.00

    In Stock - Despatched 1-2 Days

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Length 20 mm 
    Diameter 16 mm 
  • Hinge Pivot With Handle Hinge Pivot With Handle ID: FX-PR30HINGE
    €43.00

    In Stock - Despatched 1-2 Days

    The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Tension Clamp (L = 66 mm) Tension Clamp (L = 66 mm) ID: FX-CTMED
    €28.00

    In Stock - Despatched 1-2 Days

    Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
    Thread Without Thread 
  • Fixture Baseplate 300x300x12mm (M8) Fixture Baseplate 300x300x12mm (M8) ID: FX-BP300__300
    €625.00

    In Stock - Despatched 1-2 Days

    This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
    Thread M8 
  • Standoff (D = 16 mm / L = 100 mm) Standoff (D = 16 mm / L = 100 mm) ID: FX-SO16__100
    €21.00

    In Stock - Despatched 1-2 Days

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Length 100 mm 
    Diameter 16 mm 
  • Spring Nut (M8) Spring Nut (M8) ID: FX-M8SPRGNUT
    €28.00

    In Stock - Despatched 1-2 Days

    Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Pillar Top Plate  (10 x M8) Pillar Top Plate (10 x M8) ID: FX-SUB45__120
    €49.00

    In Stock - Despatched 1-2 Days

    The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
    Size 120 x 45 x 12 mm 
  • Support Stop Support Stop ID: FX-SUP__STOP
    €75.00

    In Stock - Despatched 1-2 Days

    The support stop allows the user to apply a positive clamping force with variable pressure.
    Thread M8 
  • Spring Pusher Standoff Clamp (D=8mm / L=10mm) Spring Pusher Standoff Clamp (D=8mm / L=10mm) ID: FV-LATSML
    €29.00

    In Stock - Despatched 1-2 Days

    The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
    Length 10 mm 
    Diameter 8 mm 
    • 1(current)
    • 2
    • 3