Skip to content Skip to navigation menu
Hexagons COVID-19 Support & Response | Official Statement

Select your country or region

  • 1(current)
  • 2
  • 3
106 Product(s) found
  • Cone Adjustable (M4) Cone Adjustable (M4) ID: FV-CONEADJ
    €13.00

    In Stock - Despatched 1-2 Days

    The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
    Thread M4 
  • 6-Jaw Chuck without Flange (Aluminium / D=125 mm) 6-Jaw Chuck without Flange (Aluminium / D=125 mm) ID: FC-125AL6-NF
    €1,090.00

    Delivery time 10-15 days

    Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
    Outside Diameter Chuck (D1) 125 mm
    Clamping Range 5 - 156 mm
    Fixing (G) M5 
  • SWIFT-CHECK SWIFT-CHECK ID: GB0096-2001
    €4,550.00

    Delivery time 10-15 days

    SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
    CMM Compatibility GLOBAL S 
    GLOBAL Lite 
    TIGO SF 
    4.5.4 SF 
    7.10.7 SF 
    Software Compatibility PC-DMIS (V2016 onwards)  
    QUINDOS (Q7R18351 onwards)  
    Run Times Length Check: 20 Minutes 
    Ring Check: 5 Minutes 
    Sphere Check: 5 Minutes 
    Wrist- / Probe Head Check: 10 Minutes 
    Dimensions Length Bar Length = 300 mm 
    Ring Gauge Diameter = 25 mm 
    Sphere Diameter = 25 mm 
  • Kinematic Support Kit Plus Kinematic Support Kit Plus ID: FX-KINKITPLUS
    €250.00

    In Stock - Despatched 1-2 Days

    The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
    Plate Compatibility KB-UNIVL 
  • 3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm) 3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm) ID: FC-125SS3
    €1,160.00

    In Stock - Despatched 1-2 Days

    Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
    Outside Diameter Chuck (D1) 125 mm
    Clamping Range Outside (A) 1 - 126 mm
    Clamping Range Inside (I) 32 - 122 mm
    Fixing M4 / M8 
  • 3-Jaw Chuck without Flange (Stainless Steel / D=160 mm) 3-Jaw Chuck without Flange (Stainless Steel / D=160 mm) ID: FC-160SS3-NF
    €1,360.00

    Delivery time 10-15 days

    Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
    Outside Diameter Chuck (D1) 160 mm
    Clamping Range Outside (A) 1 - 150 mm
    Clamping Range Inside (I) 34 - 174 mm
    Fixing (G) M6 
  • Spring Clamp (M8) Spring Clamp (M8) ID: FX-SPRING
    €48.00

    In Stock - Despatched 1-2 Days

    Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
    Thread Without Thread 
  • Tension Clamp (L = 66 mm) Tension Clamp (L = 66 mm) ID: FX-CTMED
    €29.00

    In Stock - Despatched 1-2 Days

    Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
    Thread Without Thread 
  • Spring Pusher Standoff Clamp (D=16mm / L=20mm) Spring Pusher Standoff Clamp (D=16mm / L=20mm) ID: FX-LATMED
    €40.00

    In Stock - Despatched 1-2 Days

    The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
    Length 20 mm 
    Diameter 16 mm 
  • Kinematic Fixture Plate 300x300 mm (M8) Kinematic Fixture Plate 300x300 mm (M8) ID: KPT-300__300
    €740.00

    In Stock - Despatched 1-2 Days

    The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
    Plate Compatibility KB-250/250 
    KB-UNIVL 
  • Fixture Baseplate 400x400x12mm (M8) Fixture Baseplate 400x400x12mm (M8) ID: FX-BP400__400
    €960.00

    In Stock - Despatched 1-2 Days

    This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
    Thread M8 
  • Swift-Fix Tool Kit Swift-Fix Tool Kit ID: FX-TOOLS
    €24.00

    In Stock - Despatched 1-2 Days

    The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
  • Cap Screw Set M8 (L = 16 mm) Cap Screw Set M8 (L = 16 mm) ID: FX-CAPM8__16
    €16.00

    In Stock - Despatched 1-2 Days

    Cap screws are used to mount Swift-Fix components on the base plate.
    Thread M8 
  • Cap Screw Set M8 (L = 20 mm) Cap Screw Set M8 (L = 20 mm) ID: FX-CAPM8__20
    €16.00

    In Stock - Despatched 1-2 Days

    Cap screws are used to mount Swift-Fix components on the base plate.
    Thread M8 
  • Swift-Fix - Gold Kit Swift-Fix - Gold Kit ID: FX-GOLD__KIT
    €2,320.00

    In Stock - Despatched 1-2 Days

    With its content of 93 components the Swift-Fix Gold Kit is suitable for the construction of larger and complex fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
    Thread M8 
    Application CMM 
    Portable Measuring Arm 
  • Kinematic Base for Fixture Plate 500x500mm Kinematic Base for Fixture Plate 500x500mm ID: KB-400__400
    €790.00

    In Stock - Despatched 1-2 Days

    The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
    Plate Compatibility KPP-500/500 
    KPT-500/500 
  • Acryl Baseplate 200x200x10mm (M4) - Cross Pattern Acryl Baseplate 200x200x10mm (M4) - Cross Pattern ID: FV-BP200__200C
    €250.00

    In Stock - Despatched 1-2 Days

    Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
    Thread M4 
  • Fixture Baseplate 500x500x12mm (M8) Fixture Baseplate 500x500x12mm (M8) ID: FX-BP500__500
    €1,380.00

    In Stock - Despatched 1-2 Days

    This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
    Thread M8 
  • Pillar 30x30x50mm Pillar 30x30x50mm ID: FX-PR30__50
    €34.00

    In Stock - Despatched 1-2 Days

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
    Size 30 x 30 x 50 mm 
  • Fixture Baseplate 600x600x12mm (M8) Fixture Baseplate 600x600x12mm (M8) ID: FX-BP600__600
    €1,730.00

    In Stock - Despatched 1-2 Days

    This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
    Thread M8 
    • 1(current)
    • 2
    • 3