Skip to content Skip to navigation menu
As part of our new security upgrades, you are requested to reset your password
  1. Home
  2. Catalogue
  3. CMM
  4. Fixtures

Fixtures

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Price:  €471.00
Quick Overview:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40mm
Delivery time 10-15 days
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Price:  €550.00
Quick Overview:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60mm
Delivery time 10-15 days
SWIFT-SET
SWIFT-SET
ID: GB0122-1000
Price:  €8,470.00
Quick Overview: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.
  • Compatibility:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Delivery time 10-15 days
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Price:  €254.00
Quick Overview:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Plate Compatibility:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
In Stock - Despatched 1-2 Days
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Price:  €10.00
Quick Overview:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  20 mm
  • Diameter:  8 mm
In Stock - Despatched 1-2 Days
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Price:  €21.00
Quick Overview:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Thread:  M4
In Stock - Despatched 1-2 Days
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Price:  €750.00
Quick Overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Part Number:  FX-BP300/300
  • Thread:  M8
In Stock - Despatched 1-2 Days
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Price:  €10.00
Quick Overview:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  25 mm
  • Diameter:  8 mm
In Stock - Despatched 1-2 Days
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Price:  €17.00
Quick Overview:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Length:  6 mm
  • Diameter:  8 mm
In Stock - Despatched 1-2 Days
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Price:  €1,030.00
Quick Overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Part Number:  FX-BP400/400
  • Thread:  M8
In Stock - Despatched 1-2 Days
Fixture Baseplate 600x600x12mm (M8)
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
Price:  €1,840.00
Quick Overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Part Number:  FX-BP600/600
  • Thread:  M8
In Stock - Despatched 1-2 Days
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Price:  €18.00
Quick Overview:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Length:  10 mm
  • Diameter:  8 mm
In Stock - Despatched 1-2 Days
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Price:  €50.00
Quick Overview:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
In Stock - Despatched 1-2 Days
Universal Clamp (M8)
Universal Clamp (M8)
ID: FX-CLAMP
Price:  €125.00
Quick Overview:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Thread:  M8
In Stock - Despatched 1-2 Days
Vee Block Single
Vee Block Single
ID: FV-VEE
Price:  €31.00
Quick Overview:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
In Stock - Despatched 1-2 Days
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Price:  €17.00
Quick Overview:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Thread:  M4
In Stock - Despatched 1-2 Days
Clamping and Stop Pin Set for 6-Jaw Chuck Ø125 mm
Clamping and Stop Pin Set for 6-Jaw Chuck Ø125 mm
ID: FC-PS-125AL6
Price:  €810.00
Quick Overview: 

Clamping and stop pin set for 6-jaw chucks (Aluminium / Ø125 mm).
Delivery time 10-15 days
Clamping and Stop Pin Set for 6-Jaw Chuck Ø160 mm
Clamping and Stop Pin Set for 6-Jaw Chuck Ø160 mm
ID: FC-PS-160AL6
Price:  €910.00
Quick Overview: 

Clamping and stop pin set for 6-jaw chucks (Aluminium / D = Ø160 mm).
Delivery time 10-15 days
Basic Jaw Set (Aluminium)
Basic Jaw Set (Aluminium)
ID: FC-JS-240AL3-I
Price:  €990.00
Quick Overview: 

Basic jaw set made of aluminum with hard-coated surface. Compatible with 3-jaw chucks made of aluminium with Ø240 mm.
  • Material:  Aluminium with hard coated surface
Delivery time 10-15 days
3-Jaw 70 Inside Clamping Set (Stainless Steel)
3-Jaw 70 Inside Clamping Set (Stainless Steel)
ID: FC-JS-70SS3-I
Price:  €353.00
Quick Overview: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø70 mm.
  • Material:  Stainless Steel, vacuum-hardened, ground
Delivery time 10-15 days