text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
N° : GB0122-0019
Prix:  CHF480.00
Vue d'ensemble sommaire:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Part Number:  GB0122-0019
  • Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40mm
Livraison sous 10 à 15 jours
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
N° : GB0122-0008
Prix:  CHF560.00
Vue d'ensemble sommaire:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Part Number:  GB0122-0008
  • Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60mm
Livraison sous 10 à 15 jours
Resting Cone (M8)
N° : FX-CONE
Prix:  CHF22.00
Vue d'ensemble sommaire:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Part Number:  FX-CONE
  • Thread:  M8
En stock - Livraison sous 1 à 2 jours
Angle Block Slider (M4)
N° : FV-ANGSLIDER
Prix:  CHF22.00
Vue d'ensemble sommaire:  The angle block slider enables users to position elements horizontally on the base plate.
  • Part Number:  FV-ANGSLIDER
  • Thread:  M4
En stock - Livraison sous 1 à 2 jours
Fixture Baseplate 600x600x12mm (M8)
N° : FX-BP600__600
Prix:  CHF1,900.00
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Part Number:  FX-BP600/600
  • Thread:  M8
En stock - Livraison sous 1 à 2 jours
Standoff Pin (D = 8 mm / L = 10 mm)
N° : FV-SO__PIN
Prix:  CHF19.00
Vue d'ensemble sommaire:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Part Number:  FV-SO/PIN
  • Length:  10 mm
  • Diameter:  8 mm
En stock - Livraison sous 1 à 2 jours
Corner Bracket
N° : FV-CNRBRKT
Prix:  CHF52.00
Vue d'ensemble sommaire:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Part Number:  FV-CNRBRKT
En stock - Livraison sous 1 à 2 jours
Universal Clamp (M8)
N° : FX-CLAMP
Prix:  129,00 €
Vue d'ensemble sommaire:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Part Number:  FX-CLAMP
  • Thread:  M8
En stock - Livraison sous 1 à 2 jours
Vee Block Single
N° : FV-VEE
Prix:  32,00 €
Vue d'ensemble sommaire:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
  • Part Number:  FV-VEE
En stock - Livraison sous 1 à 2 jours
Tension Post (M4)
N° : FV-POST
Prix:  19,00 €
Vue d'ensemble sommaire:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Part Number:  FV-POST
  • Thread:  M4
En stock - Livraison sous 1 à 2 jours
Swift-Fix - Basic Kit
N° : FX-BASIC__KIT
Prix:  475,00 €
Vue d'ensemble sommaire:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Part Number:  FX-BASIC/KIT
  • Thread:  M8
  • Application:  CMM, Portable Measuring Arm
En stock - Livraison sous 1 à 2 jours
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
N° : FV-BP200__200F
Prix:  600,00 €
Vue d'ensemble sommaire:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Part Number:  FV-BP200/200F
  • Thread:  M4
En stock - Livraison sous 1 à 2 jours
Spring Clamp (M8)
N° : FX-SPRING
Prix:  50,00 €
Vue d'ensemble sommaire:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Part Number:  FX-SPRING
  • Thread:  Without Thread
En stock - Livraison sous 1 à 2 jours
Thumb Screw M8
N° : FX-THUMB
Prix:  10,00 €
Vue d'ensemble sommaire:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Part Number:  FX-THUMB
  • Thread:  M8
En stock - Livraison sous 1 à 2 jours
Standoff (D = 16 mm / L = 20 mm)
N° : FX-SO16__20
Prix:  18,00 €
Vue d'ensemble sommaire:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FX-SO16/20
  • Length:  20 mm
  • Diameter:  16 mm
En stock - Livraison sous 1 à 2 jours
Hinge Pivot With Handle
N° : FX-PR30HINGE
Prix:  84,00 €
Vue d'ensemble sommaire:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Part Number:  FX-PR30HINGE
En stock - Livraison sous 1 à 2 jours
Standoff (D = 16 mm / L = 100 mm)
N° : FX-SO16__100
Prix:  26,00 €
Vue d'ensemble sommaire:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FX-SO16/100
  • Length:  100 mm
  • Diameter:  16 mm
En stock - Livraison sous 1 à 2 jours
Spring Nut (M8)
N° : FX-M8SPRGNUT
Prix:  33,00 €
Vue d'ensemble sommaire:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Part Number:  FX-M8SPRGNUT
En stock - Livraison sous 1 à 2 jours
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
N° : FC-125SS3
Prix:  1 220,00 €
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125SS3
  • Outside Diameter Chuck (D1):  125mm
  • Clamping Range Outside (A):  1 - 126mm
  • Clamping Range Inside (I):  32 - 122mm
  • Fixing:  M4 / M8
En stock - Livraison sous 1 à 2 jours
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
N° : FC-125AL6
Prix:  1 220,00 €
Vue d'ensemble sommaire:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125AL6
  • Outside Diameter Chuck (D1):  125mm
  • Clamping Range:  5 - 156mm
  • Fixing:  M4 / M8
En stock - Livraison sous 1 à 2 jours