Skip to content Skip to navigation menu
Hexagons COVID-19 Support & Response | Official Statement

Select your country or region

  • 1(current)
  • 2
  • 3
106 Product(s) found
  • Vee Locator Vee Locator ID: FV-FEMALE
    CHF23.00

    In Stock - Despatched 1-2 Days

    Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Cone Adjustable (M4) Cone Adjustable (M4) ID: FV-CONEADJ
    CHF12.00

    In Stock - Despatched 1-2 Days

    The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
    Thread M4 
  • Hinge Pivot With Handle Hinge Pivot With Handle ID: FX-PR30HINGE
    CHF43.00

    In Stock - Despatched 1-2 Days

    The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Standoff Support (M4) Standoff Support (M4) ID: FV-SOSUP
    CHF12.00

    In Stock - Despatched 1-2 Days

    The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
    Length 6 mm 
    Diameter 8 mm 
  • Centering Pin Centering Pin ID: FV-MALE
    CHF18.00

    In Stock - Despatched 1-2 Days

    Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
    Thread M4 
  • Standoff Magnet  (D = 16 mm / L = 20 mm) Standoff Magnet (D = 16 mm / L = 20 mm) ID: FX-SO__MAG
    CHF18.00

    In Stock - Despatched 1-2 Days

    The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
    Length 20 mm 
    Diameter 16 mm 
  • Standoff Pin (D = 8 mm / L = 10 mm) Standoff Pin (D = 8 mm / L = 10 mm) ID: FV-SO__PIN
    CHF11.00

    In Stock - Despatched 1-2 Days

    The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
    Length 10 mm 
    Diameter 8 mm 
  • Standoff Pin M8 (D= 16 mm/L= 20 mm) Standoff Pin M8 (D= 16 mm/L= 20 mm) ID: FX-SO__PIN
    CHF18.00

    In Stock - Despatched 1-2 Days

    The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
    Length 20 mm 
    Diameter 16 mm 
  • Vee Block Single Vee Block Single ID: FV-VEE
    CHF27.00

    In Stock - Despatched 1-2 Days

    The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
  • Standoff Magnet  (D = 8 mm / L = 10 mm) Standoff Magnet (D = 8 mm / L = 10 mm) ID: FV-SO__MAG
    CHF12.00

    In Stock - Despatched 1-2 Days

    The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
    Length 10 mm 
    Diameter 8 mm 
  • Resting Cone (M4) Resting Cone (M4) ID: FV-CONE
    CHF11.00

    In Stock - Despatched 1-2 Days

    The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
    Thread M4 
  • Universal Kinematic Fixture Base Universal Kinematic Fixture Base ID: KB-UNIVL
    CHF533.00

    In Stock - Despatched 1-2 Days

    The universal kinematic base remains on the machine and ensures accurate, highly repeatable placement of kinematic fixture plates without manual alignment. It can be used with any size of kinematic fixture plates.
    Plate Compatibility KPP-300/300 
    KPT-300/300 
    KPP-400/400 
    KPT-400/400 
    KPP-500/500 
    KPT-500/500 
  • Pillar Base Plate Pillar Base Plate ID: FX-PR30PLATE
    CHF43.00

    In Stock - Despatched 1-2 Days

    The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
    Size 130 x 30 mm 
  • Universal Clamp (M8) Universal Clamp (M8) ID: FX-CLAMP
    CHF97.00

    In Stock - Despatched 1-2 Days

    The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
    Thread M8 
  • Kinematic Support Kit Plus Kinematic Support Kit Plus ID: FX-KINKITPLUS
    CHF238.00

    In Stock - Despatched 1-2 Days

    The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
    Plate Compatibility KB-UNIVL 
  • Toggle Clamp Toggle Clamp ID: FX-TOG
    CHF97.00

    In Stock - Despatched 1-2 Days

    Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.
    Thread M8 
  • 3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm) 3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm) ID: FC-125SS3
    CHF1,105.00

    In Stock - Despatched 1-2 Days

    Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
    Outside Diameter Chuck (D1) 125 mm
    Clamping Range Outside (A) 1 - 126 mm
    Clamping Range Inside (I) 32 - 122 mm
    Fixing M4 / M8 
  • 3-Jaw Chuck without Flange (Stainless Steel / D=70 mm) 3-Jaw Chuck without Flange (Stainless Steel / D=70 mm) ID: FC-70SS3-NF
    CHF848.00

    Delivery time 10-15 days

    Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
    Outside Diameter Chuck (D1) 70 mm
    Clamping Range Outside (A) 1 - 71 mm
    Clamping Range Inside (I) 18 - 66 mm
    Fixing (G) M3 
  • 6-Jaw Chuck without Flange (Aluminium / D=160 mm) 6-Jaw Chuck without Flange (Aluminium / D=160 mm) ID: FC-160AL6-NF
    CHF1,362.00

    Delivery time 10-15 days

    Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
    Outside Diameter Chuck (D1) 160 mm
    Clamping Range 5 - 196 mm
    Fixing (G) M6 
  • Spring Clamp (M8) Spring Clamp (M8) ID: FX-SPRING
    CHF46.00

    In Stock - Despatched 1-2 Days

    Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
    Thread Without Thread 
    • 1(current)
    • 2
    • 3