As part of our new security upgrades, you are requested to reset your password

CMM

166 Product(s) found

ID: GB0096-2001

Price: €4,550.00

Quick Overview: SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.

CMM Compatibility: GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
Software Compatibility: PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
Run Times: Length Check: 20 Minutes, Ring Check: 5 Minutes, Sphere Check: 5 Minutes, Wrist- / Probe Head Check: 10 Minutes
Dimensions: Length Bar Length = 300 mm, Ring Gauge Diameter = 25 mm, Sphere Diameter = 25 mm

Delivery time 10-15 days

3-Jaw Chuck without Flange (Aluminium / D=240 mm)

ID: FC-240AL3-NF

Price: €3,160.00

Quick Overview: Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.

Outside Diameter Chuck (D1): 240mm
Clamping Range Outside (A): 1 - 288mm
Clamping Range Inside (I): 35 - 295mm
Fixing (G): M8

Delivery time 10-15 days

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings

ID: GB0122-0019

Price: €440.00

Quick Overview: Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.

Compatibility: HP-S-X3 Stylus Clampings
Diameter: 40mm

Delivery time 10-15 days

SWIFT-SET Adapter for HP-S-X1 Stylus Clampings

ID: GB0122-0008

Price: €510.00

Compatibility: HP-S-X1 Stylus Clampings
Diameter: 60mm

Delivery time 10-15 days

SWIFT-SET

ID: GB0122-1000

Price: €6,500.00

Quick Overview: Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon’s HP-S-X tactile scanning sensors.

Compatibility: HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
Axial Rotation: 0° - 360°
Angular Rotation: 0°- 90°

Delivery time 10-15 days

HR-MP6-90 Probe Module Changer Rack

ID: 03939481

Price: €2,300.00

Quick Overview: 6-port probe module changer rack with a height of 90 mm

Port Quantity: 6
Height: 88mm

In Stock - Despatched 1-2 Days

Angular Adapter Set TKJ (4 pc.)

ID: 03969394

Price: €2,500.00

Quick Overview: Set of 4 TKJ angular adapters (0°, 30°, 60°, 90°) made of aluminium and stainless steel. To be used only with HP-L-10.6.

Connection: TKJ / TKJ
Length (L): 34mm
Angle: 0° / 30° / 60° / 90°
Material: Aluminium / Stainless Steel

In Stock - Despatched 1-2 Days

HA-TT-300C Probe Extension TKJ (L = 300 mm)

ID: 03969364

Price: €1,560.00

Quick Overview: TKJ extension made of carbon fibre and stainless steel with a length of 300 mm

Connection: TKJ / TKJ
Length (L): 300mm
Material: Carbon Fibre / Stainless Steel

In Stock - Despatched 1-2 Days

HA-TM-300 Probe Adapter TKJ/M8 (L = 300 mm)

ID: 03969367

Price: €380.00

Quick Overview: TKJ to M8 adapter made aluminium and stainless steel with a length of 300 mm

Connection: TKJ / M8
Length (L): 300mm
Material: Aluminium / Stainless Steel

In Stock - Despatched 1-2 Days

HR-SP-160 Rack Extension (L = 160 mm)

ID: 03969487

Price: €166.00

Quick Overview: Sensor module rack extension to lift up HR-MP racks to a total height of 250 mm. Length 160 mm.

Length: 160mm
Diameter: 19.5mm

In Stock - Despatched 1-2 Days

Safety Pin for HR-MP Rack

ID: 03969488

Price: €49.00

Quick Overview: Safety / locking pin for the 3-port probe module and arm of the rack

Length: 22mm
Diameter: 8mm

In Stock - Despatched 1-2 Days

HR-SP-60 Rack Extension (L = 60 mm)

ID: 03969485

Price: €166.00

Quick Overview: Sensor module rack extension to lift up HR-MP racks to a total height of 150 mm. Length 60 mm.

Length: 60mm
Diameter: 19.5mm

In Stock - Despatched 1-2 Days

Cleaning Putty

ID: 03969650

Price: €15.00

Quick Overview: Putty for cleaning dust and dirt from parts, devices and measurement equipment.

In Stock - Despatched 1-2 Days

3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)

ID: FC-125SS3

Price: €1,160.00

Quick Overview: Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.

Outside Diameter Chuck (D1): 125mm
Clamping Range Outside (A): 1 - 126mm
Clamping Range Inside (I): 32 - 122mm
Fixing: M4 / M8

In Stock - Despatched 1-2 Days

6-Jaw Chuck with Flange (Aluminium / D = 125 mm)

ID: FC-125AL6

Price: €1,160.00

Quick Overview: Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.

Outside Diameter Chuck (D1): 125mm
Clamping Range: 5 - 156mm
Fixing: M4 / M8

In Stock - Despatched 1-2 Days

6-Jaw Chuck with Flange (Aluminium / D = 160 mm)

ID: FC-160AL6

Price: €1,430.00

Quick Overview: Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.

Outside Diameter Chuck (D1): 160mm
Clamping Range: 5 - 196mm
Fixing: M4 / M8

In Stock - Despatched 1-2 Days

6-Jaw Chuck without Flange (Aluminium / D=125 mm)

ID: FC-125AL6-NF

Price: €1,090.00

Quick Overview: Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.

Outside Diameter Chuck (D1): 125mm
Clamping Range: 5 - 156mm
Fixing (G): M5

Delivery time 10-15 days

3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)

ID: FC-125SS3-NF

Price: €1,090.00

Quick Overview: Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.

Outside Diameter Chuck (D1): 125mm
Clamping Range Outside (A): 1 - 126mm
Clamping Range Inside (I): 32 - 122mm
Fixing (G): M5

Delivery time 10-15 days

Fixture Baseplate 300x400x12mm (M8)

ID: FX-BP300__400

Price: €840.00

Quick Overview: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Thread: M8

In Stock - Despatched 1-2 Days

Tension Clamp (L = 39 mm)

ID: FX-CTSML

Price: €29.00

Quick Overview: Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.

Thread: Without Thread

In Stock - Despatched 1-2 Days

Added to your shopping cart.

Previous
1(current)
2
3
4
5
Next

Product availability by store location

Hours

CMM

Filters