text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji dotyczących bezpieczeństwa prosimy o zresetowanie hasła
  1. Strona Główna
  2. Katalog
  3. WMP
  4. Rozwiązania montażowe

Rozwiązania montażowe

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Cena:  €480.00
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Part Number:  GB0122-0019
  • Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40
Czas dostawy 10-15 dni
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Cena:  €560.00
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Part Number:  GB0122-0008
  • Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60
Czas dostawy 10-15 dni
Vee Locator
Vee Locator
ID: FV-FEMALE
Cena:  €33.00
Szybki Podgląd:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Part Number:  FV-FEMALE
W magazynie - wysyłka w ciągu 1-2 dni
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Cena:  €47.00
Szybki Podgląd:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Part Number:  FV-VEETWIN
W magazynie - wysyłka w ciągu 1-2 dni
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Cena:  €279.00
Szybki Podgląd:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Part Number:  FV-GUIDE480
  • Plate Compatibility :  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Cena:  €10.00
Szybki Podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FV-SO8/20
  • Length:  20 mm
  • Diameter:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Cena:  €10.00
Szybki Podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FV-SO8/25
  • Length:  25 mm
  • Diameter:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Cena:  €18.00
Szybki Podgląd:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Part Number:  FV-SOSUP
  • Length:  6 mm
  • Diameter:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
ID: FV-BP200__200P
Cena:  €594.00
Szybki Podgląd:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Part Number:  FV-BP200/200P
  • Thread:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Centering Pin
Centering Pin
ID: FV-MALE
Cena:  24,00 €
Szybki Podgląd:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Part Number:  FV-MALE
  • Thread:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Swift-Fix Vision - Starter Kit
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Cena:  1 254,00 €
Szybki Podgląd:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Part Number:  FV-STARTERKIT
  • Thread:  M4
  • Application:  Multisensor CMM
W magazynie - wysyłka w ciągu 1-2 dni
Swift-Fix Vision - Full Kit
Swift-Fix Vision - Full Kit
ID: FV-FULLKIT
Cena:  2 530,00 €
Szybki Podgląd:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Part Number:  FV-FULLKIT
  • Thread:  M4
  • Application:  Multisensor CMM
W magazynie - wysyłka w ciągu 1-2 dni
Flexible Vice
Flexible Vice
ID: FV-SLIDE
Cena:  420,00 €
Szybki Podgląd:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Part Number:  FV-SLIDE
  • Thread:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Cena:  605,00 €
Szybki Podgląd:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Part Number:  FV-BP200/200C
  • Thread:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Cena:  22,00 €
Szybki Podgląd:  The angle block slider enables users to position elements horizontally on the base plate.
  • Part Number:  FV-ANGSLIDER
  • Thread:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Cena:  19,00 €
Szybki Podgląd:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Part Number:  FV-SO/PIN
  • Length:  10 mm
  • Diameter:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Cena:  1 004,00 €
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Part Number:  FX-BP300/400
  • Thread:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Cena:  33,00 €
Szybki Podgląd:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Part Number:  FX-CTSML
  • Thread:  Without Thread
W magazynie - wysyłka w ciągu 1-2 dni
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Cena:  50,00 €
Szybki Podgląd:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Part Number:  FX-SPRING
  • Thread:  Without Thread
W magazynie - wysyłka w ciągu 1-2 dni
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Cena:  11,00 €
Szybki Podgląd:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Part Number:  FX-THUMB
  • Thread:  M8
W magazynie - wysyłka w ciągu 1-2 dni