text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. CMM
  4. Bevestigingen

Bevestigingen

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prijs:  £ 436,00
Beknopt overzicht:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Onderdeelnummer:  GB0122-0019
  • Compatibiliteit:  HP-S-X3 Stylus Clampings
  • Diameter:  40
Levertijd 10-15 dagen
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prijs:  £ 509,00
Beknopt overzicht:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Onderdeelnummer:  GB0122-0008
  • Compatibiliteit:  HP-S-X1 Stylus klemmen
  • Diameter:  60
Levertijd 10-15 dagen
Slider Block (M8)
Slider Block (M8)
ID: FX-SLIDER
Prijs:  £ 24,00
Beknopt overzicht:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Onderdeelnummer:  FX-SLIDER
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
SWIFT-CHECK
SWIFT-CHECK
ID: GB0096-2001
Prijs:  £ 5.233,00
Beknopt overzicht:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Onderdeelnummer:  GB0096-2001
  • CMM compatibiliteit:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Software compatibiliteit:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Time:  Length Check: 20 Minutes, Controle van de meetring: 5 minuten, Sphere Check: 5 Minutes, Wrist- / Probe Head Check: 10 Minutes
  • Afmetingen:  Length Bar Length = 300 mm, Ring Gauge Diameter = 25 mm, Kogel Diameter = 25 mm
Levertijd > 25 dagen
SWIFT-SET
SWIFT-SET
ID: GB0122-1000
Prijs:  £ 7.773,00
Beknopt overzicht: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.
  • Onderdeelnummer:  GB0122-1000
  • Compatibiliteit:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Levertijd > 25 dagen
6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
ID: FC-125AL6
Prijs:  £ 1.198,00
Beknopt overzicht: 

6-jaw chuck with flange made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Onderdeelnummer:  FC-125AL6
  • Buitendiameter klemvoet (D1):  125
  • Klembereik:  5 - 156
  • Materiaal:  Aluminium
  • Bevestiging:  M4 / M8
Op voorraad - verzending 1-2 dagen
3-Jaw Chuck with Flange (Aluminium / Ø 240 mm)
3-Jaw Chuck with Flange (Aluminium / Ø 240 mm)
ID: FC-240AL3
Prijs:  £ 3.377,00
Beknopt overzicht: 

3-jaw chuck with flange made of aluminium with an outside diameter of 240 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Onderdeelnummer:  FC-240AL3
  • Buitendiameter klemvoet (D1):  240
  • Klembereik buitenzijde (A):  1 - 288
  • Klembereik binnenzijde (I):  35 - 295
  • Materiaal:  Aluminium
Op voorraad - verzending 1-2 dagen
3-Jaw Chuck with Flange (Stainless Steel / Ø 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / Ø 160 mm)
ID: FC-160SS3
Prijs:  £ 1.423,00
Beknopt overzicht: 

3-jaw chuck with flange made of stainless steel with an outside diameter of 160 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Onderdeelnummer:  FC-160SS3
  • Buitendiameter klemvoet (D1):  160
  • Klembereik buitenzijde (A):  1 - 150
  • Klembereik binnenzijde (I):  34 - 174
  • Materiaal:  Roestvast staal
Op voorraad - verzending 1-2 dagen
3-Jaw Chuck with Flange (Stainless Steel / Ø 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / Ø 70 mm)
ID: FC-70SS3
Prijs:  £ 897,00
Beknopt overzicht: 

3-jaw chuck with flange made of stainless steel with an outside diameter of 70 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Onderdeelnummer:  FC-70SS3
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
Op voorraad - verzending 1-2 dagen
3-Jaw Chuck without Flange (Stainless Steel / Ø 70 mm)
3-Jaw Chuck without Flange (Stainless Steel / Ø 70 mm)
ID: FC-70SS3-NF
Prijs:  £ 845,00
Beknopt overzicht: 

3-jaw chuck made of stainless steel with an outside diameter of 70 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Onderdeelnummer:  FC-70SS3-NF
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
Levertijd 10-15 dagen
3-Jaw Chuck without Flange (Stainless Steel / Ø 160 mm)
3-Jaw Chuck without Flange (Stainless Steel / Ø 160 mm)
ID: FC-160SS3-NF
Prijs:  £ 1.291,00
Beknopt overzicht: 

3-jaw chuck made of stainless steel with an outside diameter of 160 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Onderdeelnummer:  FC-160SS3-NF
  • Buitendiameter klemvoet (D1):  160
  • Klembereik buitenzijde (A):  1 - 150
  • Klembereik binnenzijde (I):  34 - 174
  • Materiaal:  Roestvast staal
Levertijd 10-15 dagen
6-Jaw Chuck without Flange (Aluminium / Ø 125 mm)
6-Jaw Chuck without Flange (Aluminium / Ø 125 mm)
ID: FC-125AL6-NF
Prijs:  £ 1.036,00
Beknopt overzicht: 

6-jaw chuck made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Onderdeelnummer:  FC-125AL6-NF
  • Buitendiameter klemvoet (D1):  125
  • Klembereik:  5 - 156
  • Materiaal:  Aluminium
  • Bevestiging (G):  M5
Levertijd 10-15 dagen
6-Jaw Chuck without Flange (Aluminium / Ø 160 mm)
6-Jaw Chuck without Flange (Aluminium / Ø 160 mm)
ID: FC-160AL6-NF
Prijs:  £ 1.355,00
Beknopt overzicht: 

6-jaw chuck made of aluminium with an outside diameter of 160 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Onderdeelnummer:  FC-160AL6-NF
  • Buitendiameter klemvoet (D1):  160
  • Klembereik:  5 - 196
  • Materiaal:  Aluminium
  • Bevestiging (G):  M6
Levertijd 10-15 dagen
3-Jaw Chuck without Flange (Aluminium / Ø 240 mm)
3-Jaw Chuck without Flange (Aluminium / Ø 240 mm)
ID: FC-240AL3-NF
Prijs:  £ 3.000,00
Beknopt overzicht: 

3-jaw chuck made of aluminium with an outside diameter of 240 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Onderdeelnummer:  FC-240AL3-NF
  • Buitendiameter klemvoet (D1):  240
  • Klembereik buitenzijde (A):  1 - 288
  • Klembereik binnenzijde (I):  35 - 295
  • Materiaal:  Aluminium
Levertijd 10-15 dagen
3-Jaw Chuck without Flange (Stainless Steel / Ø 125 mm)
3-Jaw Chuck without Flange (Stainless Steel / Ø 125 mm)
ID: FC-125SS3-NF
Prijs:  £ 1.036,00
Beknopt overzicht: 

3-jaw chuck made of stainless steel with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Onderdeelnummer:  FC-125SS3-NF
  • Buitendiameter klemvoet (D1):  125
  • Klembereik buitenzijde (A):  1 - 126
  • Klembereik binnenzijde (I):  32 - 122
  • Materiaal:  Roestvast staal
Levertijd 10-15 dagen
3-Jaw 125 Outside Clamping Set (Stainless Steel)
3-Jaw 125 Outside Clamping Set (Stainless Steel)
ID: FC-JS-125SS3-E
Prijs:  £ 380,00
Beknopt overzicht: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø 125 mm.
  • Onderdeelnummer:  FC-JS-125SS3-E
  • Materiaal:  Stainless Steel, vacuum-hardened, ground
Levertijd 10-15 dagen
6-Jaw 125 Inside/Outside Clamping Set (AL)
6-Jaw 125 Inside/Outside Clamping Set (AL)
ID: FC-JS-125AL6-IE
Prijs:  £ 664,00
Beknopt overzicht: 

6-jaw clamping set for internal and external clamping. Made of aluminium with a hard-coated surface and positioning holes for locating and stop pins. Compatible with Ø 125 mm aluminium 6-jaw chucks.
  • Onderdeelnummer:  FC-JS-125AL6-IE
  • Materiaal:  Aluminium, hard anodised
Levertijd 10-15 dagen
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prijs:  £ 913,00
Beknopt overzicht: 

This fixture base plate can be connected side-by-side with other base plates of the same size. M8 threaded holes and alphanumeric identification enable quick and easy fixture setup and repeatable fixture assembly.
  • Onderdeelnummer:  FX-BP300/400
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Vee Locator
Vee Locator
ID: FV-FEMALE
Prijs:  £ 30,00
Beknopt overzicht:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Onderdeelnummer:  FV-FEMALE
Op voorraad - verzending 1-2 dagen
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prijs:  £ 43,00
Beknopt overzicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Onderdeelnummer:  FV-VEETWIN
Op voorraad - verzending 1-2 dagen