text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
3-Jaw 70 Inside Clamping Set (Stainless Steel)
ID: FC-JS-70SS3-I
Prijs:  € 364,00
Beknopt overzicht: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø70 mm.

  • Onderdeelnummer:  FC-JS-70SS3-I
  • Materiaal:  Stainless Steel, vacuum-hardened, ground
Levertijd 10-15 dagen
6-Jaw 160 Inside/Outside Clamping Set (AL)
ID: FC-JS-160AL6-IE
Prijs:  € 1.040,00
Beknopt overzicht: 

6-Jaw clamping set for inside and outside clamping. Made of aluminum with hard-coated surface and positioning holes for clamping and stop pins. Compatible with 6-jaw chucks made of aluminum Ø160 mm.

  • Onderdeelnummer:  FC-JS-160AL6-IE
  • Materiaal:  Aluminium, hard anodised
Levertijd 10-15 dagen
Reversible Top Jaw Set for Inside/Outside Clamping
ID: FC-JS-240SS3-IE
Prijs:  € 1.120,00
Beknopt overzicht: 

Reversible top jaw set for inside and outside clamping. Made of stainless steel, vacuum hardened, ground. Compatible with 3-jaw chucks made of Aluminium with Ø240 mm.

  • Onderdeelnummer:  FC-JS-240SS3-IE
  • Materiaal:  Stainless Steel, vacuum-hardened, ground
Levertijd 10-15 dagen
RA7 USB-Cable with Hub (L = 5 m)
ID: H00000707
Prijs:  € 152,00
Beknopt overzicht:  Powered USB cable, length 5 m. For use with all Series 7 Absolute Arm models.
  • Compatibiliteit:  Absolute Arm RA7, Absolute Arm MultiGage
  • Onderdeelnummer:  H00000707
  • Lengte:  5
  • Stekkertype:  Hirose
  • USB / LAN:  USB
Levertijd 10-15 dagen
RA7 USB/Ethernet Cable for RSx / HP-L Scanner (L = 5 m)
ID: H00000708
Prijs:  € 370,00
Beknopt overzicht:  Combined powered USB-Ethernet cable, length 5 m. For use with Series 7 Absolute Arm models configured for laser scanning.
  • Compatibiliteit:  Absolute Arm RA7
  • Onderdeelnummer:  H00000708
  • Lengte:  5
  • Stekkertype:  Hirose
  • USB / LAN:  USB / LAN
Op voorraad - verzending 1-2 dagen
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Prijs:  € 279,00
Beknopt overzicht:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Onderdeelnummer:  FV-GUIDE480
  • Basisplaat comptabiliteit:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
Op voorraad - verzending 1-2 dagen
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prijs:  € 10,00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FV-SO8/20
  • Lengte:  20 mm
  • Diameter:  8 mm
Op voorraad - verzending 1-2 dagen
Standoff Support (M4)
ID: FV-SOSUP
Prijs:  € 18,00
Beknopt overzicht:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Onderdeelnummer:  FV-SOSUP
  • Lengte:  6 mm
  • Diameter:  8 mm
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Prijs:  € 1.145,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP400/400
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Pillar Kit
ID: FX-PILLAR__KIT
Prijs:  € 1.020,00
Beknopt overzicht:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
  • Onderdeelnummer:  FX-PILLAR/KIT
Op voorraad - verzending 1-2 dagen
Standoff Adjustable (M8)
ID: FX-HEIGHT
Prijs:  € 62,00
Beknopt overzicht:  The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
  • Onderdeelnummer:  FX-HEIGHT
  • Lengte:  50 mm
  • Diameter:  16 mm
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Prijs:  € 1.955,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP400/600
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Centering Pin
ID: FV-MALE
Prijs:  € 24,00
Beknopt overzicht:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Onderdeelnummer:  FV-MALE
  • Schroefdraad:  M4
Op voorraad - verzending 1-2 dagen
Baseplate Retaining Screw (M8)
ID: FX-BPRTR
Prijs:  € 6,00
Beknopt overzicht:  Retaining screws secure base plates on the machine table and make it simple to mount multiple plates next to each other.
  • Onderdeelnummer:  FX-BPRTR
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Prijs:  € 1.254,00
Beknopt overzicht:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Onderdeelnummer:  FV-STARTERKIT
  • Schroefdraad:  M4
  • Toepassing:  Multisensor CMM
Op voorraad - verzending 1-2 dagen
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
Prijs:  € 19,00
Beknopt overzicht:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Onderdeelnummer:  FX-CAPM8/16
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Flexible Vice
ID: FV-SLIDE
Prijs:  € 420,00
Beknopt overzicht:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Onderdeelnummer:  FV-SLIDE
  • Schroefdraad:  M4
Op voorraad - verzending 1-2 dagen
Cap Screw Set M8 (L = 20 mm)
ID: FX-CAPM8__20
Prijs:  € 19,00
Beknopt overzicht:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Onderdeelnummer:  FX-CAPM8/20
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Standoff (D = 20 mm / L = 100 mm)
ID: FX-SO20__100
Prijs:  € 26,00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FX-SO20/100
  • Lengte:  100 mm
  • Diameter:  20 mm
Op voorraad - verzending 1-2 dagen
Swift-Fix Tool Kit
ID: FX-TOOLS
Prijs:  € 27,00
Beknopt overzicht:  The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
  • Onderdeelnummer:  FX-TOOLS
Op voorraad - verzending 1-2 dagen