text.skipToContent text.skipToNavigation
Nellambito dei nostri nuovi aggiornamenti di sicurezza ti viene richiesto di reimpostare la password
  1. Pagina iniziale
  2. Catalogo
  3. CMM
  4. Attrezzaggi

Attrezzaggi

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prezzo:  466,00 €
Descrizione:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Compatibilità:  HP-S-X3 Stylus Clampings
  • Diametro:  40mm
Tempi di consegna 10-15 Giorni
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prezzo:  540,00 €
Descrizione:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Compatibilità:  HP-S-X1 Stylus Clampings
  • Diametro:  60mm
Tempi di consegna 10-15 Giorni
SWIFT-SET
SWIFT-SET
ID: GB0122-1000
Prezzo:  8.140,00 €
Descrizione: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.
  • Compatibilità:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Tempi di consegna 10-15 Giorni
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Prezzo:  1.160,00 €
Descrizione:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  125mm
  • Campo di serraggio:  5 - 156mm
  • Materiale:  Alluminio
  • Serrraggio:  M4 / M8
Disponibile - Spedizione in 1-2 Giorni
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
ID: FC-160AL6-NF
Prezzo:  1.430,00 €
Descrizione:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  160mm
  • Campo di serraggio:  5 - 196mm
  • Materiale:  Alluminio
  • Serrraggio (G):  M6
Tempi di consegna 10-15 Giorni
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
ID: FC-240AL3-NF
Prezzo:  3.160,00 €
Descrizione:  Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  240mm
  • Campo di serraggio esterno (A):  1 - 288mm
  • Campo di serraggio interno (I):  35 - 295mm
  • Materiale:  Alluminio
  • Serrraggio (G):  M8
Tempi di consegna 10-15 Giorni
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
ID: FC-125SS3-NF
Prezzo:  1.090,00 €
Descrizione: 

3-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  125mm
  • Campo di serraggio esterno (A):  1 - 126mm
  • Campo di serraggio interno (I):  32 - 122mm
  • Materiale:  Acciaio inossidabile
  • Serrraggio (G):  M5
Tempi di consegna 10-15 Giorni
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Prezzo:  1.726,00 €
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Centering Pin
Centering Pin
ID: FV-MALE
Prezzo:  20,00 €
Descrizione:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Baseplate Retaining Screw (M8)
Baseplate Retaining Screw (M8)
ID: FX-BPRTR
Prezzo:  5,00 €
Descrizione:  Retaining screws secure base plates on the machine table and make it simple to mount multiple plates next to each other.
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Swift-Fix Vision - Starter Kit
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Prezzo:  1.800,00 €
Descrizione:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetto:  M4
  • Applicazione:  Multisensor CMM
Disponibile - Spedizione in 1-2 Giorni
Cap Screw Set M8 (L = 16 mm)
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
Prezzo:  17,00 €
Descrizione:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Swift-Fix Vision - Full Kit
Swift-Fix Vision - Full Kit
ID: FV-FULLKIT
Prezzo:  2.116,00 €
Descrizione:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetto:  M4
  • Applicazione:  Multisensor CMM
Disponibile - Spedizione in 1-2 Giorni
Flexible Vice
Flexible Vice
ID: FV-SLIDE
Prezzo:  259,00 €
Descrizione:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Cap Screw Set M8 (L = 20 mm)
Cap Screw Set M8 (L = 20 mm)
ID: FX-CAPM8__20
Prezzo:  17,00 €
Descrizione:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Prezzo:  263,00 €
Descrizione:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Prezzo:  19,00 €
Descrizione:  The angle block slider enables users to position elements horizontally on the base plate.
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Prezzo:  1.453,00 €
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Fixture Baseplate 600x600x12mm (M8)
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
Prezzo:  1.821,00 €
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Prezzo:  13,00 €
Descrizione:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Lunghezza:  10 mm
  • Diametro:  8 mm
Disponibile - Spedizione in 1-2 Giorni