Hexagons COVID-19 Support & Response | Official Statement
Choisissez votre pays ou zone géographique
- Austria
- Bosnia
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Lithuana
- Luxembourg
- Latvia
- Netherlands
- Norway
- Poland
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
- Serbia
- Switzerland
- United Kingdom
700,00 €
En stock - Livraison sous 1 à 2 jours
Adaptateur TKJ à angle 60° en aluminium et acier inoxydable
Connexion | TKJ / TKJ |
Longueur (L) | 35 mm |
Angle | 60° |
Matériau | Aluminium / Acier inoxydable |
1 300,00 €
En stock - Livraison sous 1 à 2 jours
Rallonge TKJ en aluminium et acier inoxydable d'une longueur de 300 mm
Connexion | TKJ / TKJ |
Longueur (L) | 300 mm |
Matériau | Aluminium / Acier inoxydable |
700,00 €
En stock - Livraison sous 1 à 2 jours
Adaptateur TKJ à angle 90° en aluminium et acier inoxydable
Connexion | TKJ / TKJ |
Longueur (L) | 35 mm |
Angle | 90° |
Matériau | Aluminium / Acier inoxydable |
1 430,00 €
Livraison sous 10 à 15 jours
Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
Diamètre extérieur du mandrin (D1) | 160 mm |
Plage de fixation | 5 - 196 mm |
Matériau | Aluminium |
Fixation (G) | M6 |
2 860,00 €
En stock - Livraison sous 1 à 2 jours
The HP-TMe Probe is a compact 5-way touch trigger probe in two-piece design. The HP-TMe Probe Kit 6 includes 1 probe body, 1 medium and 1 extended force probe module.
Comptabilité palpeur | HP-TMe |
Directions du palpeur | ± X, ± Y, + Z |
Fixation du palpeur | M8 |
Filetage de stylet | M2 |
Contenu kit |
1x Corps du palpeur HP-TBe 1x Module du palpeur HP-TMe-MF 1x Module du palpeur HP-TMe-EF |
790,00 €
En stock - Livraison sous 1 à 2 jours
The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
Plaque adaptable |
KPP-500/500 KPT-500/500 |
560,00 €
En stock - Livraison sous 1 à 2 jours
The universal kinematic base remains on the machine and ensures accurate, highly repeatable placement of kinematic fixture plates without manual alignment. It can be used with any size of kinematic fixture plates.
Plaque adaptable |
KPP-300/300 KPT-300/300 KPP-400/400 KPT-400/400 KPP-500/500 KPT-500/500 |
45,00 €
En stock - Livraison sous 1 à 2 jours
The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
Taille | 130 x 30 mm |
34,00 €
En stock - Livraison sous 1 à 2 jours
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
Taille | 30 x 30 x 50 mm |
1 730,00 €
En stock - Livraison sous 1 à 2 jours
This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
Filetage | M8 |
250,00 €
En stock - Livraison sous 1 à 2 jours
The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
Plaque adaptable | KB-UNIVL |
1 160,00 €
En stock - Livraison sous 1 à 2 jours
Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
Diamètre extérieur du mandrin (D1) | 125 mm |
Plage de serrage extérieur (A) | 1 - 126 mm |
Plage de serrage intérieur (I) | 32 - 122 mm |
Matériau | Acier inoxydable |
Fixation | M4 / M8 |
720,00 €
En stock - Livraison sous 1 à 2 jours
Accurate base with accurate cylinder, accurate fixation piece and mounting equipment
Protection de collision | Non |
Recalibrage automatique | Qui |
166,00 €
En stock - Livraison sous 1 à 2 jours
Sensor module rack extension to lift up HR-MP racks to a total height of 150 mm. Length 60 mm.
Longueur | 60 mm |
Diamètre | 19,5 mm |
1 360,00 €
Livraison sous 10 à 15 jours
Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
Diamètre extérieur du mandrin (D1) | 160 mm |
Plage de serrage extérieur (A) | 1 - 150 mm |
Plage de serrage intérieur (I) | 34 - 174 mm |
Matériau | Acier inoxydable |
Fixation (G) | M6 |
840,00 €
En stock - Livraison sous 1 à 2 jours
This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
Filetage | M8 |
40,00 €
En stock - Livraison sous 1 à 2 jours
The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
29,00 €
En stock - Livraison sous 1 à 2 jours
Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Filetage | Without Thread |
22,00 €
En stock - Livraison sous 1 à 2 jours
Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
Longueur | 100 mm |
Diamètre | 16 mm |
23,00 €
En stock - Livraison sous 1 à 2 jours
Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
Longueur | 100 mm |
Diamètre | 20 mm |
Ajouté au panier.
Disponibilité du produit par site
Horaires