text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe

Choisissez votre pays ou zone géographique

  1. Accueil
  2. Catalogue
  3. MMT
  4. Bridages
Trier par :
  • 1(current)
  • 2
  • 3
106 Produit(s) trouvé(s)
  • Vee Locator Vee Locator N° : FV-FEMALE
    24,00 €

    En stock - Livraison sous 1 à 2 jours

    Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Standoff (D = 16 mm / L = 20 mm) Standoff (D = 16 mm / L = 20 mm) N° : FX-SO16__20
    15,00 €

    En stock - Livraison sous 1 à 2 jours

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Longueur 20 mm 
    Diamètre 16 mm 
  • Hinge Pivot With Handle Hinge Pivot With Handle N° : FX-PR30HINGE
    45,00 €

    En stock - Livraison sous 1 à 2 jours

    The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Fixture Baseplate 300x300x12mm (M8) Fixture Baseplate 300x300x12mm (M8) N° : FX-BP300__300
    660,00 €

    En stock - Livraison sous 1 à 2 jours

    This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
    Filetage M8 
  • Pillar Top Plate (10 x M8) Pillar Top Plate (10 x M8) N° : FX-SUB45__120
    51,00 €

    En stock - Livraison sous 1 à 2 jours

    The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
    Taille 120 x 45 x 12 mm 
  • Support Stop Support Stop N° : FX-SUP__STOP
    79,00 €

    En stock - Livraison sous 1 à 2 jours

    The support stop allows the user to apply a positive clamping force with variable pressure.
    Filetage M8 
  • Pillar 30x30x150mm Pillar 30x30x150mm N° : FX-PR30__150
    39,00 €

    En stock - Livraison sous 1 à 2 jours

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
    Taille 30 x 30 x 150 mm 
  • Standoff Support (M4) Standoff Support (M4) N° : FV-SOSUP
    13,00 €

    En stock - Livraison sous 1 à 2 jours

    The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
    Longueur 6 mm 
    Diamètre 8 mm 
  • Pillar Kit Pillar Kit N° : FX-PILLAR__KIT
    930,00 €

    En stock - Livraison sous 1 à 2 jours

    The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
  • Standoff Adjustable (M8) Standoff Adjustable (M8) N° : FX-HEIGHT
    56,00 €

    En stock - Livraison sous 1 à 2 jours

    The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
    Longueur 50 mm 
    Diamètre 16 mm 
  • Centering Pin Centering Pin N° : FV-MALE
    19,00 €

    En stock - Livraison sous 1 à 2 jours

    Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
    Filetage M4 
  • Flexible Vice Flexible Vice N° : FV-SLIDE
    246,00 €

    En stock - Livraison sous 1 à 2 jours

    Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
    Filetage M4 
  • Kinematic Support Kit Kinematic Support Kit N° : FX-KINKIT
    238,00 €

    En stock - Livraison sous 1 à 2 jours

    The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
  • Resting Cone (M8) Resting Cone (M8) N° : FX-CONE
    19,00 €

    En stock - Livraison sous 1 à 2 jours

    The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
    Filetage M8 
  • Pillar Base Plate Pillar Base Plate N° : FX-PR30PLATE
    45,00 €

    En stock - Livraison sous 1 à 2 jours

    The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
    Taille 130 x 30 mm 
  • Pillar 30x30x100mm Pillar 30x30x100mm N° : FX-PR30__100
    36,00 €

    En stock - Livraison sous 1 à 2 jours

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
    Taille 30 x 30 x 100 mm 
  • Pillar 30x30x250mm Pillar 30x30x250mm N° : FX-PR30__250
    45,00 €

    En stock - Livraison sous 1 à 2 jours

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
    Taille 30 x 30 x 250 mm 
  • Kinematic Base for Fixture Plate 300x300mm Kinematic Base for Fixture Plate 300x300mm N° : KB-250__250
    560,00 €

    En stock - Livraison sous 1 à 2 jours

    The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
    Plaque adaptable KPP-300/300 
    KPT-300/300 
  • Pillar 30x30x200mm Pillar 30x30x200mm N° : FX-PR30__200
    42,00 €

    En stock - Livraison sous 1 à 2 jours

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
    Taille 30 x 30 x 200 mm 
  • Corner Bracket Corner Bracket N° : FV-CNRBRKT
    47,00 €

    En stock - Livraison sous 1 à 2 jours

    The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
    • Trier par :
    • 1(current)
    • 2
    • 3