Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
Choisissez votre pays ou zone géographique
- Austria
- Bosnia
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Lithuana
- Luxembourg
- Latvia
- Netherlands
- Norway
- Poland
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
- Serbia
- Switzerland
- United Kingdom
Vee Locator
N° : FV-FEMALE
24,00 €
En stock - Livraison sous 1 à 2 jours
Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Support Stop
N° : FX-SUP__STOP
79,00 €
En stock - Livraison sous 1 à 2 jours
The support stop allows the user to apply a positive clamping force with variable pressure.
| Filetage | M8 |
Centering Pin
N° : FV-MALE
19,00 €
En stock - Livraison sous 1 à 2 jours
Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
| Filetage | M4 |
Flexible Vice
N° : FV-SLIDE
246,00 €
En stock - Livraison sous 1 à 2 jours
Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
| Filetage | M4 |
Resting Cone (M8)
N° : FX-CONE
19,00 €
En stock - Livraison sous 1 à 2 jours
The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
| Filetage | M8 |
Corner Bracket
N° : FV-CNRBRKT
47,00 €
En stock - Livraison sous 1 à 2 jours
The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Vee Block Single
N° : FV-VEE
28,00 €
En stock - Livraison sous 1 à 2 jours
The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
Resting Cone (M4)
N° : FV-CONE
12,00 €
En stock - Livraison sous 1 à 2 jours
The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
| Filetage | M4 |
Cone Adjustable (M4)
N° : FV-CONEADJ
13,00 €
En stock - Livraison sous 1 à 2 jours
The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
| Filetage | M4 |
Cap Screw Set M8 (L = 16 mm)
N° : FX-CAPM8__16
16,00 €
En stock - Livraison sous 1 à 2 jours
Cap screws are used to mount Swift-Fix components on the base plate.
| Filetage | M8 |
Cap Screw Set M8 (L = 20 mm)
N° : FX-CAPM8__20
16,00 €
En stock - Livraison sous 1 à 2 jours
Cap screws are used to mount Swift-Fix components on the base plate.
| Filetage | M8 |
Thumb Screw M8
N° : FX-THUMB
9,00 €
En stock - Livraison sous 1 à 2 jours
With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
| Filetage | M8 |
Baseplate Retaining Screw (M8)
N° : FX-BPRTR
5,00 €
En stock - Livraison sous 1 à 2 jours
Retaining screws secure base plates on the machine table and make it simple to mount multiple plates next to each other.
| Filetage | M8 |
Vee Block Twin
N° : FV-VEETWIN
40,00 €
En stock - Livraison sous 1 à 2 jours
The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Slider Block (M4)
N° : FV-SLIDER
14,00 €
En stock - Livraison sous 1 à 2 jours
A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
| Filetage | M4 |
Universal Joint
N° : FX-UNI__JOINT
86,00 €
En stock - Livraison sous 1 à 2 jours
Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
| Filetage | M8 |
Vee Locator
N° : FX-VEE
70,00 €
En stock - Livraison sous 1 à 2 jours
The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
| Filetage | M8 |
Angle Block Slider (M4)
N° : FV-ANGSLIDER
18,00 €
En stock - Livraison sous 1 à 2 jours
The angle block slider enables users to position elements horizontally on the base plate.
| Filetage | M4 |
Slider Block (M8)
N° : FX-SLIDER
23,00 €
En stock - Livraison sous 1 à 2 jours
A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
| Filetage | M8 |
Articulated Fixture Arm (M8)
N° : FX-ARM
79,00 €
En stock - Livraison sous 1 à 2 jours
The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
| Filetage | M8 |
Ajouté au panier.
Disponibilité du produit par site
Horaires