text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
  1. Accueil
  2. Catalogue
  3. MMT
  4. Bridages

Bridages

6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
N° : FC-125AL6
Prix:  1.318,00 €
Vue d'ensemble sommaire: 

6-jaw chuck with flange made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Referencia:  FC-125AL6
  • Diámetro exterior mandril (D1):  125
  • Area de fijación:  5 - 156
  • Material:  Aluminio
  • Fijación:  M4 / M8
En stock - Livraison sous 1 à 2 jours
3-Jaw Chuck with Flange (Aluminium / Ø 240 mm)
3-Jaw Chuck with Flange (Aluminium / Ø 240 mm)
N° : FC-240AL3
Prix:  3.715,00 €
Vue d'ensemble sommaire: 

3-jaw chuck with flange made of aluminium with an outside diameter of 240 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Referencia:  FC-240AL3
  • Diámetro exterior mandril (D1):  240
  • Area de fijación exterior (A):  1 - 288
  • Area de fijación interior (I):  35 - 295
  • Material:  Aluminio
En stock - Livraison sous 1 à 2 jours
3-Jaw Chuck with Flange (Stainless Steel / Ø 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / Ø 160 mm)
N° : FC-160SS3
Prix:  1.565,00 €
Vue d'ensemble sommaire: 

3-jaw chuck with flange made of stainless steel with an outside diameter of 160 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Referencia:  FC-160SS3
  • Diámetro exterior mandril (D1):  160
  • Area de fijación exterior (A):  1 - 150
  • Area de fijación interior (I):  34 - 174
  • Material:  Acero inoxidable
En stock - Livraison sous 1 à 2 jours
3-Jaw Chuck without Flange (Stainless Steel / Ø 160 mm)
3-Jaw Chuck without Flange (Stainless Steel / Ø 160 mm)
N° : FC-160SS3-NF
Prix:  1.420,00 €
Vue d'ensemble sommaire: 

3-jaw chuck made of stainless steel with an outside diameter of 160 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Referencia:  FC-160SS3-NF
  • Diámetro exterior mandril (D1):  160
  • Area de fijación exterior (A):  1 - 150
  • Area de fijación interior (I):  34 - 174
  • Material:  Acero inoxidable
Livraison sous 10 à 15 jours
6-Jaw Chuck without Flange (Aluminium / Ø 125 mm)
6-Jaw Chuck without Flange (Aluminium / Ø 125 mm)
N° : FC-125AL6-NF
Prix:  1.140,00 €
Vue d'ensemble sommaire: 

6-jaw chuck made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Referencia:  FC-125AL6-NF
  • Diámetro exterior mandril (D1):  125
  • Area de fijación:  5 - 156
  • Material:  Aluminio
  • Fijación (G):  M5
Livraison sous 10 à 15 jours
6-Jaw Chuck without Flange (Aluminium / Ø 160 mm)
6-Jaw Chuck without Flange (Aluminium / Ø 160 mm)
N° : FC-160AL6-NF
Prix:  1.490,00 €
Vue d'ensemble sommaire: 

6-jaw chuck made of aluminium with an outside diameter of 160 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Referencia:  FC-160AL6-NF
  • Diámetro exterior mandril (D1):  160
  • Area de fijación:  5 - 196
  • Material:  Aluminio
  • Fijación (G):  M6
Livraison sous 10 à 15 jours
3-Jaw Chuck without Flange (Aluminium / Ø 240 mm)
3-Jaw Chuck without Flange (Aluminium / Ø 240 mm)
N° : FC-240AL3-NF
Prix:  3.300,00 €
Vue d'ensemble sommaire: 

3-jaw chuck made of aluminium with an outside diameter of 240 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Referencia:  FC-240AL3-NF
  • Diámetro exterior mandril (D1):  240
  • Area de fijación exterior (A):  1 - 288
  • Area de fijación interior (I):  35 - 295
  • Material:  Aluminio
Livraison sous 10 à 15 jours
3-Jaw Chuck without Flange (Stainless Steel / Ø 125 mm)
3-Jaw Chuck without Flange (Stainless Steel / Ø 125 mm)
N° : FC-125SS3-NF
Prix:  1.140,00 €
Vue d'ensemble sommaire: 

3-jaw chuck made of stainless steel with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Referencia:  FC-125SS3-NF
  • Diámetro exterior mandril (D1):  125
  • Area de fijación exterior (A):  1 - 126
  • Area de fijación interior (I):  32 - 122
  • Material:  Acero inoxidable
Livraison sous 10 à 15 jours
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
N° : FX-BP300__400
Prix:  1.004,00 €
Vue d'ensemble sommaire: 

This fixture base plate can be connected side-by-side with other base plates of the same size. M8 threaded holes and alphanumeric identification enable quick and easy fixture setup and repeatable fixture assembly.
  • Referencia:  FX-BP300/400
  • Rosca:  M8
En stock - Livraison sous 1 à 2 jours
Vee Locator
Vee Locator
N° : FV-FEMALE
Prix:  33,00 €
Vue d'ensemble sommaire:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Referencia:  FV-FEMALE
En stock - Livraison sous 1 à 2 jours
Vee Block Twin
Vee Block Twin
N° : FV-VEETWIN
Prix:  47,00 €
Vue d'ensemble sommaire:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Referencia:  FV-VEETWIN
En stock - Livraison sous 1 à 2 jours
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
N° : FV-GUIDE480
Prix:  279,00 €
Vue d'ensemble sommaire: 

The base plate guide rail provides precise alignment and positioning of acrylic base plates at any side of the measuring volume of a multisensor CMM.
  • Referencia:  FV-GUIDE480
  • Compatibilidad placas:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
En stock - Livraison sous 1 à 2 jours
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
N° : FV-SO8__20
Prix:  10,00 €
Vue d'ensemble sommaire:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FV-SO8/20
  • Rosca:  M4
  • Diámetro:  8 mm
  • Longitud:  20 mm
En stock - Livraison sous 1 à 2 jours
Cone Adjustable (M4)
Cone Adjustable (M4)
N° : FV-CONEADJ
Prix:  22,00 €
Vue d'ensemble sommaire:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Referencia:  FV-CONEADJ
  • Rosca:  M4
En stock - Livraison sous 1 à 2 jours
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
N° : FX-BP300__300
Prix:  819,00 €
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Referencia:  FX-BP300/300
  • Rosca:  M8
En stock - Livraison sous 1 à 2 jours
Spring Pusher Standoff Clamp (D = 8 mm / L = 10 mm)
Spring Pusher Standoff Clamp (D = 8 mm / L = 10 mm)
N° : FV-LATSML
Prix:  39,00 €
Vue d'ensemble sommaire: 

The spring-loaded standoff securely holds delicate components in position using lateral clamping force.
  • Referencia:  FV-LATSML
  • Rosca:  M4
  • Diámetro:  8 mm
  • Longitud:  10 mm
En stock - Livraison sous 1 à 2 jours
Swift-Fix - Bronze Kit
Swift-Fix - Bronze Kit
N° : FX-BRONZE__KIT
Prix:  1.061,00 €
Vue d'ensemble sommaire:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Referencia:  FX-BRONZE/KIT
  • Rosca:  M8
  • Aplicación:  CMM, Brazo medición portátil
En stock - Livraison sous 1 à 2 jours
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
N° : FV-SO8__25
Prix:  10,00 €
Vue d'ensemble sommaire:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FV-SO8/25
  • Rosca:  M4
  • Diámetro:  8 mm
  • Longitud:  25 mm
En stock - Livraison sous 1 à 2 jours
Standoff Support (M4)
Standoff Support (M4)
N° : FV-SOSUP
Prix:  18,00 €
Vue d'ensemble sommaire:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Referencia:  FV-SOSUP
  • Rosca:  M4
  • Diámetro:  8 mm
  • Longitud:  6 mm
En stock - Livraison sous 1 à 2 jours
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
N° : FX-BP400__400
Prix:  1 145,00 €
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Referencia:  FX-BP400/400
  • Rosca:  M8
En stock - Livraison sous 1 à 2 jours