Skip to content Skip to navigation menu
As part of our new security upgrades, you are requested to reset your password
  1. Home
  2. Catalogue
  3. CMM
  4. Fixtures

Fixtures

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Price:  CHF480.00
Quick Overview:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Part Number:  GB0122-0019
  • Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40
Delivery time 10-15 days
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Price:  CHF560.00
Quick Overview:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Part Number:  GB0122-0008
  • Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60
Delivery time 10-15 days
Standoff (D = 16 mm / L = 30 mm)
Standoff (D = 16 mm / L = 30 mm)
ID: FX-SO16__30
Price:  CHF18.00
Quick Overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FX-SO16/30
  • Length:  30 mm
  • Diameter:  16 mm
In Stock - Despatched 1-2 Days
Standoff Pin M8 (D= 16 mm/L= 20 mm)
Standoff Pin M8 (D= 16 mm/L= 20 mm)
ID: FX-SO__PIN
Price:  CHF22.00
Quick Overview:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Part Number:  FX-SO/PIN
  • Length:  20 mm
  • Diameter:  16 mm
In Stock - Despatched 1-2 Days
Slider Block (M8)
Slider Block (M8)
ID: FX-SLIDER
Price:  CHF26.00
Quick Overview:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Part Number:  FX-SLIDER
  • Thread:  M8
In Stock - Despatched 1-2 Days
Pillar 30x30x200mm
Pillar 30x30x200mm
ID: FX-PR30__200
Price:  CHF46.00
Quick Overview:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Part Number:  FX-PR30/200
  • Size:  30 x 30 x 200 mm
In Stock - Despatched 1-2 Days
Swift-Fix - Silver Kit
Swift-Fix - Silver Kit
ID: FX-SILVER__KIT
Price:  CHF1,825.00
Quick Overview:  The Swift-Fix Silver Kit includes 66 components for building fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Part Number:  FX-SILVER/KIT
  • Thread:  M8
  • Application:  CMM, Portable Measuring Arm
In Stock - Despatched 1-2 Days
Standoff (D = 16 mm / L = 50 mm)
Standoff (D = 16 mm / L = 50 mm)
ID: FX-SO16__50
Price:  CHF19.00
Quick Overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FX-SO16/50
  • Length:  50 mm
  • Diameter:  16 mm
In Stock - Despatched 1-2 Days
Standoff (D = 20 mm / L = 50 mm)
Standoff (D = 20 mm / L = 50 mm)
ID: FX-SO20__50
Price:  CHF19.00
Quick Overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FX-SO20/50
  • Length:  50 mm
  • Diameter:  20 mm
In Stock - Despatched 1-2 Days
Spring Plunger
Spring Plunger
ID: FX-PLUNGER
Price:  CHF95.00
Quick Overview:  The spring plunger exerts low forces to hold sensible parts in position.
  • Part Number:  FX-PLUNGER
  • Thread:  M8
In Stock - Despatched 1-2 Days
Toggle Clamp
Toggle Clamp
ID: FX-TOG
Price:  CHF139.00
Quick Overview:  Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.
  • Part Number:  FX-TOG
  • Thread:  M8
In Stock - Despatched 1-2 Days
SWIFT-CHECK
SWIFT-CHECK
ID: GB0096-2001
Price:  CHF5,756.00
Quick Overview:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Part Number:  GB0096-2001
  • CMM Compatibility:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Software Compatibility:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Time:  Length Check: 20 Minutes, Ring Check: 5 Minutes, Sphere Check: 5 Minutes, Wrist- / Probe Head Check: 10 Minutes
  • Dimensions:  Length Bar Length = 300 mm, Ring Gauge Diameter = 25 mm, Sphere Diameter = 25 mm
Delivery > 25 days
SWIFT-SET
SWIFT-SET
ID: GB0122-1000
Price:  CHF8,550.00
Quick Overview: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.
  • Part Number:  GB0122-1000
  • Compatibility:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Delivery > 25 days
Kinematic Fixture Plate 300x300 mm (Plain)
Kinematic Fixture Plate 300x300 mm (Plain)
ID: KPP-300__300
Price:  CHF546.00
Quick Overview:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Part Number:  KPP-300/300
  • Plate Compatibility :  KB-250/250, KB-UNIVL
In Stock - Despatched 1-2 Days
Kinematic Fixture Plate 500x500 mm (Plain)
Kinematic Fixture Plate 500x500 mm (Plain)
ID: KPP-500__500
Price:  CHF835.00
Quick Overview:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Part Number:  KPP-500/500
  • Plate Compatibility :  KB-400/400, KB-UNIVL
In Stock - Despatched 1-2 Days
Kinematic Fixture Plate 300x300x16 mm (M8)
Kinematic Fixture Plate 300x300x16 mm (M8)
ID: KPT-300__300
Price:  CHF880.00
Quick Overview:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Part Number:  KPT-300/300
  • Plate Compatibility :  KB-250/250, KB-UNIVL
In Stock - Despatched 1-2 Days
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Price:  CHF1,220.00
Quick Overview:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125SS3
  • Outside Diameter Chuck (D1):  125
  • Clamping Range Outside (A):  1 - 126
  • Clamping Range Inside (I):  32 - 122
  • Fixing:  M4 / M8
In Stock - Despatched 1-2 Days
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Price:  CHF1,318.00
Quick Overview:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125AL6
  • Outside Diameter Chuck (D1):  125
  • Clamping Range:  5 - 156
  • Fixing:  M4 / M8
In Stock - Despatched 1-2 Days
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
ID: FC-160AL6
Price:  CHF1,565.00
Quick Overview:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-160AL6
  • Outside Diameter Chuck (D1):  160
  • Clamping Range:  5 - 196
  • Fixing:  M4 / M8
In Stock - Despatched 1-2 Days
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
ID: FC-240AL3
Price:  CHF3,715.00
Quick Overview:  Three-jaw chuck made from aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-240AL3
  • Outside Diameter Chuck (D1):  240
  • Clamping Range Outside (A):  1 - 288
  • Clamping Range Inside (I):  35 - 295
  • Fixing:  M8
In Stock - Despatched 1-2 Days