text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
Angular Adapter Set TKJ (4 pc.)
N° : 03969394
Prix:  €3,290.00
Vue d'ensemble sommaire:  Set of 4 TKJ angular adapters (0°, 30°, 60°, 90°) made of aluminium and stainless steel. To be used only with HP-L-10.6.
  • Referencia:  03969394
  • Conexión:  TKJ / TKJ
  • Longitud (L):  34
  • Ángulo:  0° / 30° / 60° / 90°
  • Material:  Aluminio / Acero inoxidable
Livraison > 25 jours
HA-TT-100 Probe Extension TKJ (L = 100 mm)
N° : 03969361
Prix:  €1,160.00
Vue d'ensemble sommaire:  TKJ extension made of aluminium and stainless steel with a length of 100 mm.
  • Referencia:  03969361
  • Conexión:  TKJ / TKJ
  • Longitud (L):  100
  • Material:  Aluminio / Acero inoxidable
En stock - Livraison sous 1 à 2 jours
HA-TM-31 Probe Adapter TKJ/M8 (L = 31 mm)
N° : 03969365
Prix:  €325.00
Vue d'ensemble sommaire:  TKJ to M8 adapter made aluminium and stainless steel with a length of 31 mm
  • Referencia:  03969365
  • Conexión:  TKJ / M8
  • Longitud (L):  31
  • Material:  Aluminio / Acero inoxidable
En stock - Livraison sous 1 à 2 jours
HA-TT-200 Probe Extension TKJ (L = 200 mm)
N° : 03969362
Prix:  €1,400.00
Vue d'ensemble sommaire:  TKJ extension made of aluminium and stainless steel with a length of 200 mm.
  • Referencia:  03969362
  • Conexión:  TKJ / TKJ
  • Longitud (L):  200
  • Material:  Aluminio / Acero inoxidable
En stock - Livraison sous 1 à 2 jours
HA-TM-140 Probe Adapter TKJ/M8 (L = 140 mm)
N° : 03969366
Prix:  €408.00
Vue d'ensemble sommaire:  TKJ to M8 adapter made aluminium and stainless steel with a length of 140 mm
  • Referencia:  03969366
  • Conexión:  TKJ / M8
  • Longitud (L):  140
  • Material:  Aluminio / Acero inoxidable
En stock - Livraison sous 1 à 2 jours
Centering Pin
N° : FV-MALE
Prix:  €24.00
Vue d'ensemble sommaire:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Referencia:  FV-MALE
  • Rosca:  M4
En stock - Livraison sous 1 à 2 jours
Pillar Top Plate  (10 x M8)
N° : FX-SUB45__120
Prix:  €60.00
Vue d'ensemble sommaire:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Referencia:  FX-SUB45/120
  • Tamaño:  120 x 45 x 12 mm
En stock - Livraison sous 1 à 2 jours
Swift-Fix - Starter Kit
N° : FX-STARTER__KIT
Prix:  1 200,00 CHF
Vue d'ensemble sommaire:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Referencia:  FX-STARTER/KIT
  • Rosca:  M8
  • Aplicación:  CMM, Brazo medición portátil
En stock - Livraison sous 1 à 2 jours
Support Stop
N° : FX-SUP__STOP
Prix:  87,00 CHF
Vue d'ensemble sommaire:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Referencia:  FX-SUP/STOP
  • Rosca:  M8
En stock - Livraison sous 1 à 2 jours
Standoff (D = 20 mm / L = 20 mm)
N° : FX-SO20__20
Prix:  18,00 CHF
Vue d'ensemble sommaire:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO20/20
  • Longitud:  20 mm
  • Diámetro:  20 mm
En stock - Livraison sous 1 à 2 jours
Standoff (D = 20 mm / L = 100 mm)
N° : FX-SO20__100
Prix:  26,00 CHF
Vue d'ensemble sommaire:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO20/100
  • Longitud:  100 mm
  • Diámetro:  20 mm
En stock - Livraison sous 1 à 2 jours
Swift-Fix Tool Kit
N° : FX-TOOLS
Prix:  27,00 CHF
Vue d'ensemble sommaire:  The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
  • Referencia:  FX-TOOLS
En stock - Livraison sous 1 à 2 jours
Slider Block (M4)
N° : FV-SLIDER
Prix:  18,00 CHF
Vue d'ensemble sommaire:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Referencia:  FV-SLIDER
  • Rosca:  M4
En stock - Livraison sous 1 à 2 jours
Universal Joint
N° : FX-UNI__JOINT
Prix:  95,00 CHF
Vue d'ensemble sommaire:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Referencia:  FX-UNI/JOINT
  • Rosca:  M8
En stock - Livraison sous 1 à 2 jours
Resting Cone (M4)
N° : FV-CONE
Prix:  15,00 CHF
Vue d'ensemble sommaire:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Referencia:  FV-CONE
  • Rosca:  M4
En stock - Livraison sous 1 à 2 jours
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
N° : FC-240AL3
Prix:  3 440,00 CHF
Vue d'ensemble sommaire:  Three-jaw chuck made from aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-240AL3
  • Diámetro exterior mandril (D1):  240
  • Area de fijación exterior (A):  1 - 288
  • Area de fijación interior (I):  35 - 295
  • Material:  Aluminio
En stock - Livraison sous 1 à 2 jours
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
N° : FC-160SS3
Prix:  1 490,00 CHF
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-160SS3
  • Diámetro exterior mandril (D1):  160
  • Area de fijación exterior (A):  1 - 150
  • Area de fijación interior (I):  34 - 174
  • Material:  Acero inoxidable
En stock - Livraison sous 1 à 2 jours
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
N° : FC-70SS3
Prix:  940,00 CHF
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-70SS3
  • Diámetro exterior mandril (D1):  70
  • Area de fijación exterior (A):  1 - 71
  • Area de fijación interior (I):  18 - 66
  • Material:  Acero inoxidable
En stock - Livraison sous 1 à 2 jours
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
N° : FC-70SS3-NF
Prix:  930,00 CHF
Vue d'ensemble sommaire: 

3-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

  • Referencia:  FC-70SS3-NF
  • Diámetro exterior mandril (D1):  70
  • Area de fijación exterior (A):  1 - 71
  • Area de fijación interior (I):  18 - 66
  • Material:  Acero inoxidable
Livraison sous 10 à 15 jours
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
N° : FC-160SS3-NF
Prix:  1 420,00 CHF
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-160SS3-NF
  • Diámetro exterior mandril (D1):  160
  • Area de fijación exterior (A):  1 - 150
  • Area de fijación interior (I):  34 - 174
  • Material:  Acero inoxidable
Livraison sous 10 à 15 jours