text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catálogo
  3. CMM
  4. Medios de sujección

Medios de sujección

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Precio:  €480.00
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Referencia:  GB0122-0019
  • Compatibilidad:  HP-S-X3 Stylus Clampings
  • Diámetro:  40
Tiempo de entrega 10-15 días
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Precio:  €560.00
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Referencia:  GB0122-0008
  • Compatibilidad:  HP-S-X1 Stylus Clampings
  • Diámetro:  60
Tiempo de entrega 10-15 días
Pillar 30x30x150mm
Pillar 30x30x150mm
ID: FX-PR30__150
Precio:  €43.00
Descripción rápida:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Referencia:  FX-PR30/150
  • Tamaño:  30 x 30 x 150 mm
En Stock - Envío 1-2 Días
Tension Post (M8)
Tension Post (M8)
ID: FX-POST
Precio:  €27.00
Descripción rápida:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Referencia:  FX-POST
  • Rosca:  M8
En Stock - Envío 1-2 Días
Standoff (D = 20 mm / L = 20 mm)
Standoff (D = 20 mm / L = 20 mm)
ID: FX-SO20__20
Precio:  €18.00
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO20/20
  • Longitud:  20 mm
  • Diámetro:  20 mm
En Stock - Envío 1-2 Días
Standoff (D = 20 mm / L = 100 mm)
Standoff (D = 20 mm / L = 100 mm)
ID: FX-SO20__100
Precio:  €26.00
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO20/100
  • Longitud:  100 mm
  • Diámetro:  20 mm
En Stock - Envío 1-2 Días
Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Precio:  €49.00
Descripción rápida:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Referencia:  FX-PR30PLATE
  • Tamaño:  130 x 30 mm
En Stock - Envío 1-2 Días
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Precio:  €1,520.00
Descripción rápida:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Referencia:  FX-BP500/500
  • Rosca:  M8
En Stock - Envío 1-2 Días
Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Precio:  €40.00
Descripción rápida:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Referencia:  FX-PR30/100
  • Tamaño:  30 x 30 x 100 mm
En Stock - Envío 1-2 Días
Pillar 30x30x250mm
Pillar 30x30x250mm
ID: FX-PR30__250
Precio:  €49.00
Descripción rápida:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
  • Referencia:  FX-PR30/250
  • Tamaño:  30 x 30 x 250 mm
En Stock - Envío 1-2 Días
Pillar 30x30x50mm
Pillar 30x30x50mm
ID: FX-PR30__50
Precio:  €38.00
Descripción rápida:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Referencia:  FX-PR30/50
  • Tamaño:  30 x 30 x 50 mm
En Stock - Envío 1-2 Días
Fixture Baseplate 600x600x12mm (M8)
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
Precio:  €1,900.00
Descripción rápida:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Referencia:  FX-BP600/600
  • Rosca:  M8
En Stock - Envío 1-2 Días
Standoff (D = 16 mm / L = 30 mm)
Standoff (D = 16 mm / L = 30 mm)
ID: FX-SO16__30
Precio:  €18.00
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO16/30
  • Longitud:  30 mm
  • Diámetro:  16 mm
En Stock - Envío 1-2 Días
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Precio:  €1,220.00
Descripción rápida:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-125SS3
  • Diámetro exterior mandril (D1):  125
  • Area de fijación exterior (A):  1 - 126
  • Area de fijación interior (I):  32 - 122
  • Material:  Acero inoxidable
En Stock - Envío 1-2 Días
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Precio:  €1,220.00
Descripción rápida:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-125AL6
  • Diámetro exterior mandril (D1):  125
  • Area de fijación:  5 - 156
  • Material:  Aluminio
  • Fijación:  M4 / M8
En Stock - Envío 1-2 Días
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
ID: FC-160AL6
Precio:  €1,490.00
Descripción rápida:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-160AL6
  • Diámetro exterior mandril (D1):  160
  • Area de fijación:  5 - 196
  • Material:  Aluminio
  • Fijación:  M4 / M8
En Stock - Envío 1-2 Días
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
Precio:  €1,140.00
Descripción rápida:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-125AL6-NF
  • Diámetro exterior mandril (D1):  125
  • Area de fijación:  5 - 156
  • Material:  Aluminio
  • Fijación (G):  M5
Tiempo de entrega 10-15 días
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
ID: FC-125SS3-NF
Precio:  €1,140.00
Descripción rápida: 

3-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-125SS3-NF
  • Diámetro exterior mandril (D1):  125
  • Area de fijación exterior (A):  1 - 126
  • Area de fijación interior (I):  32 - 122
  • Material:  Acero inoxidable
Tiempo de entrega 10-15 días
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Precio:  €930.00
Descripción rápida:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Referencia:  FX-BP300/400
  • Rosca:  M8
En Stock - Envío 1-2 Días
Vee Locator
Vee Locator
ID: FV-FEMALE
Precio:  €33.00
Descripción rápida:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Referencia:  FV-FEMALE
En Stock - Envío 1-2 Días