text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catálogo
  3. CMM

CMM

Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Precio:  €48.00
Descripción rápida:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Referencia:  FX-PR30PLATE
  • Tamaño:  130 x 30 mm
En Stock - Envío 1-2 Días
Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Precio:  €39.00
Descripción rápida:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Referencia:  FX-PR30/100
  • Tamaño:  30 x 30 x 100 mm
En Stock - Envío 1-2 Días
Pillar 30x30x250mm
Pillar 30x30x250mm
ID: FX-PR30__250
Precio:  €48.00
Descripción rápida:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
  • Referencia:  FX-PR30/250
  • Tamaño:  30 x 30 x 250 mm
En Stock - Envío 1-2 Días
Pillar 30x30x50mm
Pillar 30x30x50mm
ID: FX-PR30__50
Precio:  €37.00
Descripción rápida:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Referencia:  FX-PR30/50
  • Tamaño:  30 x 30 x 50 mm
En Stock - Envío 1-2 Días
Standoff (D = 16 mm / L = 30 mm)
Standoff (D = 16 mm / L = 30 mm)
ID: FX-SO16__30
Precio:  €17.00
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO16/30
  • Longitud:  30 mm
  • Diámetro:  16 mm
En Stock - Envío 1-2 Días
Standoff Pin M8 (D= 16 mm/L= 20 mm)
Standoff Pin M8 (D= 16 mm/L= 20 mm)
ID: FX-SO__PIN
Precio:  €21.00
Descripción rápida:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Referencia:  FX-SO/PIN
  • Longitud:  20 mm
  • Diámetro:  16 mm
En Stock - Envío 1-2 Días
Slider Block (M8)
Slider Block (M8)
ID: FX-SLIDER
Precio:  €25.00
Descripción rápida:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Referencia:  FX-SLIDER
  • Rosca:  M8
En Stock - Envío 1-2 Días
Pillar 30x30x200mm
Pillar 30x30x200mm
ID: FX-PR30__200
Precio:  €45.00
Descripción rápida:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Referencia:  FX-PR30/200
  • Tamaño:  30 x 30 x 200 mm
En Stock - Envío 1-2 Días
Swift-Fix - Silver Kit
Swift-Fix - Silver Kit
ID: FX-SILVER__KIT
Precio:  €1,640.00
Descripción rápida:  The Swift-Fix Silver Kit includes 66 components for building fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Referencia:  FX-SILVER/KIT
  • Rosca:  M8
  • Aplicación:  CMM, Brazo medición portátil
En Stock - Envío 1-2 Días
Jogbox (NJB) Kit with cable, 15 m
Jogbox (NJB) Kit with cable, 15 m
ID: G59682800
Precio:  €1,698.00
Descripción rápida: 

Jogbox (NJB) Kit including cradle and cable (15 m).
  • Referencia:  G59682800
En Stock - Envío 1-2 Días
Ceramic Calibration Sphere Kit (D = 25 mm, H = 200 mm)
Ceramic Calibration Sphere Kit (D = 25 mm, H = 200 mm)
ID: G39031501
Precio:  €1,276.00
Descripción rápida: 

Calibration sphere set, included a certified calibration sphere (Ø25 mm) made out of ceramic and a support to position the sphere in different angles. Total height 200 mm and M8 machine fixing for use with CMMs.
  • Referencia:  G39031501
  • Sphere Material:  Cerámica
  • Diámetro de la esfera:  25mm
  • Rosca exterior:  M8
Tiempo de entrega 10-15 días
Ceramic Calibration Sphere Kit (D = 25 mm, H = 170 mm)
Ceramic Calibration Sphere Kit (D = 25 mm, H = 170 mm)
ID: G39032100
Precio:  €796.00
Descripción rápida: 

Calibration sphere set, included a certified calibration sphere (Ø25 mm) made out of ceramic and an extension (120 mm). The set has a total height of 170 mm and M8 machine fixing for use with CMMs.
  • Referencia:  G39032100
  • Sphere Material:  Cerámica
  • Diámetro de la esfera:  25mm
  • Rosca exterior:  M8
Tiempo de entrega 10-15 días
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Precio:  €900.00
Descripción rápida:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Referencia:  FX-BP300/400
  • Rosca:  M8
En Stock - Envío 1-2 Días
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Precio:  €32.00
Descripción rápida:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Referencia:  FX-CTSML
  • Rosca:  Sin rosca
En Stock - Envío 1-2 Días
Vee Locator
Vee Locator
ID: FV-FEMALE
Precio:  €32.00
Descripción rápida:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Referencia:  FV-FEMALE
En Stock - Envío 1-2 Días
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Precio:  €46.00
Descripción rápida:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Referencia:  FV-VEETWIN
En Stock - Envío 1-2 Días
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Precio:  €254.00
Descripción rápida:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Referencia:  FV-GUIDE480
  • Compatibilidad placas:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
En Stock - Envío 1-2 Días
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Precio:  €10.00
Descripción rápida:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FV-SO8/20
  • Longitud:  20 mm
  • Diámetro:  8 mm
En Stock - Envío 1-2 Días
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Precio:  €21.00
Descripción rápida:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Referencia:  FV-CONEADJ
  • Rosca:  M4
En Stock - Envío 1-2 Días
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Precio:  €32.00
Descripción rápida:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Referencia:  FX-CTMED
  • Rosca:  Sin rosca
En Stock - Envío 1-2 Días