Hexagons COVID-19 Support & Response | Official Statement
Select your country or region
- Austria
- Bosnia
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Lithuana
- Luxembourg
- Latvia
- Netherlands
- Norway
- Poland
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
- Serbia
- Switzerland
- United Kingdom
€19.00
In Stock - Despatched 1-2 Days
Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
Thread | M4 |
€24.00
In Stock - Despatched 1-2 Days
Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
€45.00
In Stock - Despatched 1-2 Days
The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
€19.00
In Stock - Despatched 1-2 Days
The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
Length | 20 mm |
Diameter | 16 mm |
€12.00
In Stock - Despatched 1-2 Days
The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
Length | 10 mm |
Diameter | 8 mm |
€19.00
In Stock - Despatched 1-2 Days
The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
Length | 20 mm |
Diameter | 16 mm |
€13.00
In Stock - Despatched 1-2 Days
The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
Length | 10 mm |
Diameter | 8 mm |
€12.00
In Stock - Despatched 1-2 Days
The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
Thread | M4 |
€1,430.00
Delivery time 10-15 days
Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
Outside Diameter Chuck (D1) | 160 mm |
Clamping Range | 5 - 196 mm |
Fixing (G) | M6 |
€48.00
In Stock - Despatched 1-2 Days
Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Thread | Without Thread |
€40.00
In Stock - Despatched 1-2 Days
The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
Length | 20 mm |
Diameter | 16 mm |
€24.00
In Stock - Despatched 1-2 Days
The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
€560.00
In Stock - Despatched 1-2 Days
The universal kinematic base remains on the machine and ensures accurate, highly repeatable placement of kinematic fixture plates without manual alignment. It can be used with any size of kinematic fixture plates.
Plate Compatibility |
KPP-300/300 KPT-300/300 KPP-400/400 KPT-400/400 KPP-500/500 KPT-500/500 |
€45.00
In Stock - Despatched 1-2 Days
The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
Size | 130 x 30 mm |
€1,160.00
In Stock - Despatched 1-2 Days
Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
Outside Diameter Chuck (D1) | 125 mm |
Clamping Range Outside (A) | 1 - 126 mm |
Clamping Range Inside (I) | 32 - 122 mm |
Fixing | M4 / M8 |
€40.00
In Stock - Despatched 1-2 Days
The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
€9.00
In Stock - Despatched 1-2 Days
Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
Length | 20 mm |
Diameter | 8 mm |
€79.00
In Stock - Despatched 1-2 Days
The support stop allows the user to apply a positive clamping force with variable pressure.
Thread | M8 |
€16.00
In Stock - Despatched 1-2 Days
Cap screws are used to mount Swift-Fix components on the base plate.
Thread | M8 |
€16.00
In Stock - Despatched 1-2 Days
Cap screws are used to mount Swift-Fix components on the base plate.
Thread | M8 |
Added to your shopping cart.
Product availability by store location
Hours