As part of our new security upgrades, you are requested to reset your password
Select your country or region
- Austria
- Bosnia
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Lithuana
- Luxembourg
- Latvia
- Netherlands
- Norway
- Poland
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
- Serbia
- Switzerland
- United Kingdom
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
€224.00
In Stock - Despatched 1-2 Days
The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
| Plate Compatibility |
FV-BP200/200C FV-BP200/200F FV-BP200/200P |
Standoff Support (M8)
ID: FX-SO__SUPP
€19.00
In Stock - Despatched 1-2 Days
The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
| Length | 10 mm |
| Diameter | 15 mm |
Spring Pusher Standoff Clamp (D=20mm / L=20mm)
ID: FX-LATLGE
€57.00
In Stock - Despatched 1-2 Days
The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
| Length | 20 mm |
| Diameter | 20 mm |
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
ID: FC-240AL3-NF
€3,160.00
Delivery time 10-15 days
Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
| Outside Diameter Chuck (D1) | 240 mm |
| Clamping Range Outside (A) | 1 - 288 mm |
| Clamping Range Inside (I) | 35 - 295 mm |
| Fixing (G) | M8 |
Kinematic Fixture Plate 500x500mm (Plain)
ID: KPP-500__500
€720.00
In Stock - Despatched 1-2 Days
The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
| Plate Compatibility |
KB-400/400 KB-UNIVL |
Tension Clamp (L = 39 mm)
ID: FX-CTSML
€29.00
In Stock - Despatched 1-2 Days
Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
| Thread | Without Thread |
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
€30.00
In Stock - Despatched 1-2 Days
The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
| Length | 10 mm |
| Diameter | 8 mm |
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
€920.00
In Stock - Despatched 1-2 Days
The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
| Thread | M8 |
| Application |
CMM Portable Measuring Arm |
Tension Post (M8)
ID: FX-POST
€24.00
In Stock - Despatched 1-2 Days
This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
| Thread | M8 |
Standoff (D = 20 mm / L = 20 mm)
ID: FX-SO20__20
€15.00
In Stock - Despatched 1-2 Days
Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
| Length | 20 mm |
| Diameter | 20 mm |
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
€860.00
In Stock - Despatched 1-2 Days
The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
| Thread | M4 |
| Application | Multisensor CMM |
Universal Joint
ID: FX-UNI__JOINT
€86.00
In Stock - Despatched 1-2 Days
Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
| Thread | M8 |
Standoff (D = 16 mm / L = 30 mm)
ID: FX-SO16__30
€15.00
In Stock - Despatched 1-2 Days
Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
| Length | 30 mm |
| Diameter | 16 mm |
Slider Block (M8)
ID: FX-SLIDER
€23.00
In Stock - Despatched 1-2 Days
A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
| Thread | M8 |
Articulated Fixture Arm (M8)
ID: FX-ARM
€79.00
In Stock - Despatched 1-2 Days
The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
| Thread | M8 |
Spring Clamp (M4)
ID: FV-SPRING
€44.00
In Stock - Despatched 1-2 Days
Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
| Thread | M4 |
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
€660.00
In Stock - Despatched 1-2 Days
This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
| Thread | M8 |
Spring Nut (M8)
ID: FX-M8SPRGNUT
€29.00
In Stock - Despatched 1-2 Days
Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
ID: FV-BP200__200P
€250.00
In Stock - Despatched 1-2 Days
Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
| Thread | M4 |
Pillar Kit
ID: FX-PILLAR__KIT
€930.00
In Stock - Despatched 1-2 Days
The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
Added to your shopping cart.
Product availability by store location
Hours