As part of our new security upgrades, you are requested to reset your password
Select your country or region
- Austria
- Bosnia
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Lithuana
- Luxembourg
- Latvia
- Netherlands
- Norway
- Poland
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
- Serbia
- Switzerland
- United Kingdom
Vee Locator
ID: FV-FEMALE
€24.00
In Stock - Despatched 1-2 Days
Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
€15.00
In Stock - Despatched 1-2 Days
Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
| Length | 20 mm |
| Diameter | 16 mm |
Hinge Pivot With Handle
ID: FX-PR30HINGE
€45.00
In Stock - Despatched 1-2 Days
The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
€660.00
In Stock - Despatched 1-2 Days
This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
| Thread | M8 |
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
€51.00
In Stock - Despatched 1-2 Days
The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
| Size | 120 x 45 x 12 mm |
Support Stop
ID: FX-SUP__STOP
€79.00
In Stock - Despatched 1-2 Days
The support stop allows the user to apply a positive clamping force with variable pressure.
| Thread | M8 |
Pillar 30x30x150mm
ID: FX-PR30__150
€39.00
In Stock - Despatched 1-2 Days
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
| Size | 30 x 30 x 150 mm |
Standoff Support (M4)
ID: FV-SOSUP
€13.00
In Stock - Despatched 1-2 Days
The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
| Length | 6 mm |
| Diameter | 8 mm |
Pillar Kit
ID: FX-PILLAR__KIT
€930.00
In Stock - Despatched 1-2 Days
The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
Standoff Adjustable (M8)
ID: FX-HEIGHT
€56.00
In Stock - Despatched 1-2 Days
The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
| Length | 50 mm |
| Diameter | 16 mm |
Centering Pin
ID: FV-MALE
€19.00
In Stock - Despatched 1-2 Days
Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
| Thread | M4 |
Flexible Vice
ID: FV-SLIDE
€246.00
In Stock - Despatched 1-2 Days
Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
| Thread | M4 |
Kinematic Support Kit
ID: FX-KINKIT
€238.00
In Stock - Despatched 1-2 Days
The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
Resting Cone (M8)
ID: FX-CONE
€19.00
In Stock - Despatched 1-2 Days
The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
| Thread | M8 |
Pillar Base Plate
ID: FX-PR30PLATE
€45.00
In Stock - Despatched 1-2 Days
The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
| Size | 130 x 30 mm |
Pillar 30x30x100mm
ID: FX-PR30__100
€36.00
In Stock - Despatched 1-2 Days
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
| Size | 30 x 30 x 100 mm |
Pillar 30x30x250mm
ID: FX-PR30__250
€45.00
In Stock - Despatched 1-2 Days
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
| Size | 30 x 30 x 250 mm |
Kinematic Base for Fixture Plate 300x300mm
ID: KB-250__250
€560.00
In Stock - Despatched 1-2 Days
The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
| Plate Compatibility |
KPP-300/300 KPT-300/300 |
Pillar 30x30x200mm
ID: FX-PR30__200
€42.00
In Stock - Despatched 1-2 Days
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
| Size | 30 x 30 x 200 mm |
Corner Bracket
ID: FV-CNRBRKT
€47.00
In Stock - Despatched 1-2 Days
The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Added to your shopping cart.
Product availability by store location
Hours