Hexagons COVID-19 Support & Response | Official Statement
Select your country or region
- Austria
- Bosnia
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Lithuana
- Luxembourg
- Latvia
- Netherlands
- Norway
- Poland
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
- Serbia
- Switzerland
- United Kingdom
Kinematic Fixture Plate 500x500 mm (M8)
ID: KPT-500__500
€1,690.00
In Stock - Despatched 1-2 Days
The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
| Plate Compatibility |
KB-400/400 KB-UNIVL |
SWIFT-CHECK
ID: GB0096-2001
€4,550.00
Delivery time 10-15 days
SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
| CMM Compatibility |
GLOBAL S GLOBAL Lite TIGO SF 4.5.4 SF 7.10.7 SF |
| Software Compatibility |
PC-DMIS (V2016 onwards) QUINDOS (Q7R18351 onwards) |
| Run Times |
Length Check: 20 Minutes Ring Check: 5 Minutes Sphere Check: 5 Minutes Wrist- / Probe Head Check: 10 Minutes |
| Dimensions |
Length Bar Length = 300 mm Ring Gauge Diameter = 25 mm Sphere Diameter = 25 mm |
Kinematic Fixture Plate 300x300mm (Plain)
ID: KPP-300__300
€470.00
In Stock - Despatched 1-2 Days
The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
| Plate Compatibility |
KB-250/250 KB-UNIVL |
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
€840.00
In Stock - Despatched 1-2 Days
This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
| Thread | M8 |
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
€22.00
In Stock - Despatched 1-2 Days
Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
| Length | 100 mm |
| Diameter | 16 mm |
Standoff (D = 20 mm / L = 100 mm)
ID: FX-SO20__100
€23.00
In Stock - Despatched 1-2 Days
Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
| Length | 100 mm |
| Diameter | 20 mm |
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
€1,090.00
Delivery time 10-15 days
Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
| Outside Diameter Chuck (D1) | 125 mm |
| Clamping Range | 5 - 156 mm |
| Fixing (G) | M5 |
Cone Adjustable (M4)
ID: FV-CONEADJ
€13.00
In Stock - Despatched 1-2 Days
The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
| Thread | M4 |
Standoff Magnet (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
€19.00
In Stock - Despatched 1-2 Days
The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
| Length | 20 mm |
| Diameter | 16 mm |
Standoff Pin M8 (D= 16 mm/L= 20 mm)
ID: FX-SO__PIN
€19.00
In Stock - Despatched 1-2 Days
The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
| Length | 20 mm |
| Diameter | 16 mm |
Universal Kinematic Fixture Base
ID: KB-UNIVL
€560.00
In Stock - Despatched 1-2 Days
The universal kinematic base remains on the machine and ensures accurate, highly repeatable placement of kinematic fixture plates without manual alignment. It can be used with any size of kinematic fixture plates.
| Plate Compatibility |
KPP-300/300 KPT-300/300 KPP-400/400 KPT-400/400 KPP-500/500 KPT-500/500 |
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
€12.00
In Stock - Despatched 1-2 Days
The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
| Length | 10 mm |
| Diameter | 8 mm |
Kinematic Support Kit Plus
ID: FX-KINKITPLUS
€250.00
In Stock - Despatched 1-2 Days
The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
| Plate Compatibility | KB-UNIVL |
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
€1,160.00
In Stock - Despatched 1-2 Days
Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
| Outside Diameter Chuck (D1) | 125 mm |
| Clamping Range Outside (A) | 1 - 126 mm |
| Clamping Range Inside (I) | 32 - 122 mm |
| Fixing | M4 / M8 |
Spring Clamp (M8)
ID: FX-SPRING
€48.00
In Stock - Despatched 1-2 Days
Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
| Thread | Without Thread |
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
€15.00
In Stock - Despatched 1-2 Days
Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
| Length | 20 mm |
| Diameter | 16 mm |
Tension Clamp (L = 66 mm)
ID: FX-CTMED
€29.00
In Stock - Despatched 1-2 Days
Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
| Thread | Without Thread |
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
€40.00
In Stock - Despatched 1-2 Days
The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
| Length | 20 mm |
| Diameter | 16 mm |
Kinematic Fixture Plate 300x300 mm (M8)
ID: KPT-300__300
€740.00
In Stock - Despatched 1-2 Days
The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
| Plate Compatibility |
KB-250/250 KB-UNIVL |
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
€960.00
In Stock - Despatched 1-2 Days
This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
| Thread | M8 |
Added to your shopping cart.
Product availability by store location
Hours