As part of our new security upgrades, you are requested to reset your password

CMM

166 Product(s) found

ID: KPT-500__500

Price: €1,780.00

Quick Overview: The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.

Plate Compatibility : KB-400/400, KB-UNIVL

In Stock - Despatched 1-2 Days

Tension Clamp (L = 39 mm)

ID: FX-CTSML

Price: €31.00

Quick Overview: Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.

Thread: Without Thread

In Stock - Despatched 1-2 Days

Vee Locator

ID: FV-FEMALE

Price: €25.00

Quick Overview: Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.

In Stock - Despatched 1-2 Days

Vee Block Twin

ID: FV-VEETWIN

Price: €42.00

Quick Overview: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

In Stock - Despatched 1-2 Days

Fixture Baseplate 400x400x12mm (M8)

ID: FX-BP400__400

Price: €1,011.00

Quick Overview: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Thread: M8

In Stock - Despatched 1-2 Days

Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern

ID: FV-BP200__200P

Price: €263.00

Quick Overview: Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.

Thread: M4

In Stock - Despatched 1-2 Days

Standoff Adjustable (M8)

ID: FX-HEIGHT

Price: €59.00

Quick Overview: The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.

Length: 50 mm
Diameter: 16 mm

In Stock - Despatched 1-2 Days

Fixture Baseplate 400x600x12mm (M8)

ID: FX-BP400__600

Price: €1,726.00

Quick Overview: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Thread: M8

In Stock - Despatched 1-2 Days

Centering Pin

ID: FV-MALE

Price: €20.00

Quick Overview: Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.

Thread: M4

In Stock - Despatched 1-2 Days

Baseplate Retaining Screw (M8)

ID: FX-BPRTR

Price: €5.00

Quick Overview: Retaining screws secure base plates on the machine table and make it simple to mount multiple plates next to each other.

Thread: M8

In Stock - Despatched 1-2 Days

Swift-Fix Vision - Starter Kit

ID: FV-STARTERKIT

Price: €1,800.00

Quick Overview: The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Thread: M4
Application: Multisensor CMM

In Stock - Despatched 1-2 Days

Standoff (D = 8 mm / L = 15 mm)

ID: FV-SO8__15

Price: €9.00

Quick Overview: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Length: 15 mm
Diameter: 8 mm

In Stock - Despatched 1-2 Days

Slider Block (M4)

ID: FV-SLIDER

Price: €15.00

Quick Overview: A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.

Thread: M4

In Stock - Despatched 1-2 Days

Standoff Magnet (D = 8 mm / L = 10 mm)

ID: FV-SO__MAG

Price: €14.00

Quick Overview: The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.

Length: 10 mm
Diameter: 8 mm

In Stock - Despatched 1-2 Days

Spring Clamp (M4)

ID: FV-SPRING

Price: €44.00

Quick Overview: Spring Clamps are used to clamp parts with low force without obstructing the measurement access.

Thread: M4

In Stock - Despatched 1-2 Days

Resting Cone (M4)

ID: FV-CONE

Price: €13.00

Quick Overview: The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.

Thread: M4

In Stock - Despatched 1-2 Days

3-Jaw Chuck with Flange (Aluminium / D = 240 mm)

ID: FC-240AL3

Price: €3,300.00

Quick Overview: Three-jaw chuck made from aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.

Outside Diameter Chuck (D1): 240mm
Clamping Range Outside (A): 1 - 288mm
Clamping Range Inside (I): 35 - 295mm
Fixing: M8

In Stock - Despatched 1-2 Days

3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)

ID: FC-70SS3-NF

Price: €890.00

Quick Overview: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

Outside Diameter Chuck (D1): 70mm
Clamping Range Outside (A): 1 - 71mm
Clamping Range Inside (I): 18 - 66mm
Fixing (G): M3

Delivery time 10-15 days

3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)

ID: FC-160SS3-NF

Price: €1,360.00

Quick Overview: Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.

Outside Diameter Chuck (D1): 160mm
Clamping Range Outside (A): 1 - 150mm
Clamping Range Inside (I): 34 - 174mm
Fixing (G): M6

Delivery time 10-15 days

3-Jaw Chuck without Flange (Aluminium / D=240 mm)

ID: FC-240AL3-NF

Price: €3,160.00

Quick Overview: Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.

Outside Diameter Chuck (D1): 240mm
Clamping Range Outside (A): 1 - 288mm
Clamping Range Inside (I): 35 - 295mm
Fixing (G): M8

Delivery time 10-15 days

Added to your shopping cart.

Previous
3
4
5(current)
6
7
Next

Product availability by store location

Hours

CMM

Filters