As part of our new security upgrades, you are requested to reset your password
Select your country or region
- Austria
- Bosnia
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Lithuana
- Luxembourg
- Latvia
- Netherlands
- Norway
- Poland
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
- Serbia
- Switzerland
- United Kingdom
Kinematic Fixture Plate 300x300mm (Plain)
ID: KPP-300__300
€470.00
In Stock - Despatched 1-2 Days
The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
| Plate Compatibility |
KB-250/250 KB-UNIVL |
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
€840.00
In Stock - Despatched 1-2 Days
This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
| Thread | M8 |
Kinematic Fixture Plate 500x500mm (Plain)
ID: KPP-500__500
€720.00
In Stock - Despatched 1-2 Days
The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
| Plate Compatibility |
KB-400/400 KB-UNIVL |
Tension Clamp (L = 39 mm)
ID: FX-CTSML
€29.00
In Stock - Despatched 1-2 Days
Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
| Thread | Without Thread |
Vee Locator
ID: FV-FEMALE
€24.00
In Stock - Despatched 1-2 Days
Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Vee Block Twin
ID: FV-VEETWIN
€40.00
In Stock - Despatched 1-2 Days
The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Spring Clamp (M8)
ID: FX-SPRING
€48.00
In Stock - Despatched 1-2 Days
Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
| Thread | Without Thread |
Thumb Screw M8
ID: FX-THUMB
€9.00
In Stock - Despatched 1-2 Days
With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
| Thread | M8 |
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
€224.00
In Stock - Despatched 1-2 Days
The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
| Plate Compatibility |
FV-BP200/200C FV-BP200/200F FV-BP200/200P |
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
€9.00
In Stock - Despatched 1-2 Days
Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
| Length | 20 mm |
| Diameter | 8 mm |
Cone Adjustable (M4)
ID: FV-CONEADJ
€13.00
In Stock - Despatched 1-2 Days
The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
| Thread | M4 |
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
€15.00
In Stock - Despatched 1-2 Days
Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
| Length | 20 mm |
| Diameter | 16 mm |
Hinge Pivot With Handle
ID: FX-PR30HINGE
€45.00
In Stock - Despatched 1-2 Days
The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Tension Clamp (L = 66 mm)
ID: FX-CTMED
€29.00
In Stock - Despatched 1-2 Days
Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
| Thread | Without Thread |
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
€660.00
In Stock - Despatched 1-2 Days
This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
| Thread | M8 |
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
€22.00
In Stock - Despatched 1-2 Days
Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
| Length | 100 mm |
| Diameter | 16 mm |
Spring Nut (M8)
ID: FX-M8SPRGNUT
€29.00
In Stock - Despatched 1-2 Days
Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
€51.00
In Stock - Despatched 1-2 Days
The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
| Size | 120 x 45 x 12 mm |
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
€1,040.00
In Stock - Despatched 1-2 Days
The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
| Thread | M8 |
| Application |
CMM Portable Measuring Arm |
Support Stop
ID: FX-SUP__STOP
€79.00
In Stock - Despatched 1-2 Days
The support stop allows the user to apply a positive clamping force with variable pressure.
| Thread | M8 |
Added to your shopping cart.
Product availability by store location
Hours