text.skipToContent text.skipToNavigation
V rámci nových bezpečnostních vylepšení vás žádáme o obnovení hesla

Select your country or region

  • 1(current)
  • 2
  • 3
106 Nalezené produkty
  • Guide Rail (L = 480 mm) Guide Rail (L = 480 mm) ID: FV-GUIDE480
    224,00 €

    Skladem - Odeslání do 1-2 dnů

    The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
    Kompatibilita desek FV-BP200/200C 
    FV-BP200/200F 
    FV-BP200/200P 
  • Standoff Support (M8) Standoff Support (M8) ID: FX-SO__SUPP
    19,00 €

    Skladem - Odeslání do 1-2 dnů

    The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
    Délka 10 mm 
    Průměr 15 mm 
  • Spring Pusher Standoff Clamp (D=20mm / L=20mm) Spring Pusher Standoff Clamp (D=20mm / L=20mm) ID: FX-LATLGE
    57,00 €

    Skladem - Odeslání do 1-2 dnů

    The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
    Délka 20 mm 
    Průměr 20 mm 
  • 3-Jaw Chuck without Flange (Aluminium / D=240 mm) 3-Jaw Chuck without Flange (Aluminium / D=240 mm) ID: FC-240AL3-NF
    3 160,00 €

    Odeslání do 10-15 dnů

    Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
    Vnější průměr sklíčidla (D1) 240 mm
    Vnější upínací rozsah (A) 1 - 288 mm
    Vnitřní upínací rozsah (I) 35 - 295 mm
    Materiál Hliník 
    Upevnění (G) M8 
  • Kinematic Fixture Plate 500x500mm (Plain) Kinematic Fixture Plate 500x500mm (Plain) ID: KPP-500__500
    720,00 €

    Skladem - Odeslání do 1-2 dnů

    The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
    Kompatibilita desek KB-400/400 
    KB-UNIVL 
  • Tension Clamp (L = 39 mm) Tension Clamp (L = 39 mm) ID: FX-CTSML
    29,00 €

    Skladem - Odeslání do 1-2 dnů

    Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
    Závit Without Thread 
  • Spring Pusher Standoff Clamp (D=8mm / L=10mm) Spring Pusher Standoff Clamp (D=8mm / L=10mm) ID: FV-LATSML
    30,00 €

    Skladem - Odeslání do 1-2 dnů

    The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
    Délka 10 mm 
    Průměr 8 mm 
  • Swift-Fix - Bronze Kit Swift-Fix - Bronze Kit ID: FX-BRONZE__KIT
    920,00 €

    Skladem - Odeslání do 1-2 dnů

    The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
    Závit M8 
    Určeno pro SMS 
    Přenosná měřicí ramena 
  • Tension Post (M8) Tension Post (M8) ID: FX-POST
    24,00 €

    Skladem - Odeslání do 1-2 dnů

    This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
    Závit M8 
  • Standoff (D = 20 mm / L = 20 mm) Standoff (D = 20 mm / L = 20 mm) ID: FX-SO20__20
    15,00 €

    Skladem - Odeslání do 1-2 dnů

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Délka 20 mm 
    Průměr 20 mm 
  • Swift-Fix Vision - Starter Kit Swift-Fix Vision - Starter Kit ID: FV-STARTERKIT
    860,00 €

    Skladem - Odeslání do 1-2 dnů

    The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
    Závit M4 
    Určeno pro Multisensor CMM 
  • Universal Joint Universal Joint ID: FX-UNI__JOINT
    86,00 €

    Skladem - Odeslání do 1-2 dnů

    Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
    Závit M8 
  • Standoff (D = 16 mm / L = 30 mm) Standoff (D = 16 mm / L = 30 mm) ID: FX-SO16__30
    15,00 €

    Skladem - Odeslání do 1-2 dnů

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Délka 30 mm 
    Průměr 16 mm 
  • Slider Block (M8) Slider Block (M8) ID: FX-SLIDER
    23,00 €

    Skladem - Odeslání do 1-2 dnů

    A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
    Závit M8 
  • Articulated Fixture Arm (M8) Articulated Fixture Arm (M8) ID: FX-ARM
    79,00 €

    Skladem - Odeslání do 1-2 dnů

    The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
    Závit M8 
  • Spring Clamp (M4) Spring Clamp (M4) ID: FV-SPRING
    44,00 €

    Skladem - Odeslání do 1-2 dnů

    Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
    Závit M4 
  • Fixture Baseplate 300x300x12mm (M8) Fixture Baseplate 300x300x12mm (M8) ID: FX-BP300__300
    660,00 €

    Skladem - Odeslání do 1-2 dnů

    This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
    Závit M8 
  • Spring Nut (M8) Spring Nut (M8) ID: FX-M8SPRGNUT
    29,00 €

    Skladem - Odeslání do 1-2 dnů

    Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern ID: FV-BP200__200P
    250,00 €

    Skladem - Odeslání do 1-2 dnů

    Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
    Závit M4 
  • Pillar Kit Pillar Kit ID: FX-PILLAR__KIT
    930,00 €

    Skladem - Odeslání do 1-2 dnů

    The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
    • 1(current)
    • 2
    • 3