text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji dotyczących bezpieczeństwa prosimy o zresetowanie hasła
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Cena:  480,00 CHF
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Numer części:  GB0122-0019
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X3
  • Średnica:  40
Czas dostawy 10-15 dni
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Cena:  560,00 CHF
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Numer części:  GB0122-0008
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X1
  • Średnica:  60
Czas dostawy 10-15 dni
Vee Locator
ID: FV-FEMALE
Cena:  33,00 CHF
Szybki Podgląd:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Numer części:  FV-FEMALE
W magazynie - wysyłka w ciągu 1-2 dni
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Cena:  279,00 CHF
Szybki Podgląd:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Numer części:  FV-GUIDE480
  • Kompatybilność płyty:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
W magazynie - wysyłka w ciągu 1-2 dni
Universal Joint
ID: FX-UNI__JOINT
Cena:  95,00 CHF
Szybki Podgląd:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Numer części:  FX-UNI/JOINT
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Vee Locator
ID: FX-VEE
Cena:  77,00 CHF
Szybki Podgląd:  The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
  • Numer części:  FX-VEE
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Toggle Clamp
ID: FX-TOG
Cena:  139,00 CHF
Szybki Podgląd:  Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.
  • Numer części:  FX-TOG
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
ID: FV-BP200__200P
Cena:  594,00 CHF
Szybki Podgląd:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Numer części:  FV-BP200/200P
  • Gwint:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Centering Pin
ID: FV-MALE
Cena:  24,00 CHF
Szybki Podgląd:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Numer części:  FV-MALE
  • Gwint:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Cena:  19,00 CHF
Szybki Podgląd:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Numer części:  FV-SO/PIN
  • Długość:  10 mm
  • Średnica:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Corner Bracket
ID: FV-CNRBRKT
Cena:  52,00 CHF
Szybki Podgląd:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Numer części:  FV-CNRBRKT
W magazynie - wysyłka w ciągu 1-2 dni
Tension Post (M4)
ID: FV-POST
Cena:  19,00 CHF
Szybki Podgląd:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Numer części:  FV-POST
  • Gwint:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Cena:  638,00 CHF
Szybki Podgląd:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Numer części:  FV-BP200/200F
  • Gwint:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Slider Block (M4)
ID: FV-SLIDER
Cena:  18,00 CHF
Szybki Podgląd:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Numer części:  FV-SLIDER
  • Gwint:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Standoff Magnet  (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Cena:  18,00 CHF
Szybki Podgląd:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Numer części:  FV-SO/MAG
  • Długość:  10 mm
  • Średnica:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Resting Cone (M4)
ID: FV-CONE
Cena:  15,00 CHF
Szybki Podgląd:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Numer części:  FV-CONE
  • Gwint:  M4
W magazynie - wysyłka w ciągu 1-2 dni
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Cena:  1 220,00 CHF
Szybki Podgląd:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-125SS3
  • Średnica zewnętrzna uchwytu (D1):  125
  • Zakres mocowania zewnętrznego (A):  1 - 126
  • Zakres mocowania wewnętrznego (I):  32 - 122
  • Materiał:  Stal Nierdzewna
W magazynie - wysyłka w ciągu 1-2 dni
SWIFT-CHECK
ID: GB0096-2001
Cena:  5 756,00 CHF
Szybki Podgląd:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Numer części:  GB0096-2001
  • Kompatybilność WMP:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Kompatybilność oprogramowania:  PC-DMIS (od v2016), QUINDOS (od vQ7R18351)
  • Czas pomiaru:  Test długości: 20 Minut, Test na pierścieniu: 5 Minut, Test na sferze: 5 Minut, Test głowicy: 10 Minut
  • Wymiary:  Wzorzec długości = 300 mm, Pierścień wzorcowy = 25 mm, Sfera wzorcowa = 25 mm
Dostawy > 25 dni
SWIFT-SET
ID: GB0122-1000
Cena:  8 550,00 CHF
Szybki Podgląd: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.

  • Numer części:  GB0122-1000
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X5, Mocowanie trzpienia (z adapterem) dla HP-S-X3, Mocowanie trzpienia (z adapterem) dla HP-S-X1
  • Oś obrotu:  0° - 360°
  • Kąt obrotu:  0°- 90°
Dostawy > 25 dni
3-Jaw 125 Inside Clamping Set (Stainless Steel)
ID: FC-JS-125SS3-I
Cena:  418,00 CHF
Szybki Podgląd: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø125 mm.

  • Numer części:  FC-JS-125SS3-I
  • Materiał:  Stainless Steel, vacuum-hardened, ground
Czas dostawy 10-15 dni