text.skipToContent text.skipToNavigation
Nellambito dei nostri nuovi aggiornamenti di sicurezza ti viene richiesto di reimpostare la password
  1. Pagina iniziale
  2. Catalogo
  3. CMM
  4. Attrezzaggi

Attrezzaggi

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prezzo:  436,00 £
Descrizione:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Numer części:  GB0122-0019
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X3
  • Średnica:  40
Tempi di consegna 10-15 Giorni
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prezzo:  509,00 £
Descrizione:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Numer części:  GB0122-0008
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X1
  • Średnica:  60
Tempi di consegna 10-15 Giorni
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Prezzo:  1 198,00 £
Descrizione:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-125AL6
  • Średnica zewnętrzna uchwytu (D1):  125
  • Zakres Mocowania:  5 - 156
  • Materiał:  Aluminium
  • Mocowanie:  M4 / M8
Disponibile - Spedizione in 1-2 Giorni
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
Prezzo:  1 036,00 £
Descrizione:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-125AL6-NF
  • Średnica zewnętrzna uchwytu (D1):  125
  • Zakres Mocowania:  5 - 156
  • Materiał:  Aluminium
  • Mocowanie (G):  M5
Tempi di consegna 10-15 Giorni
Vee Locator
Vee Locator
ID: FV-FEMALE
Prezzo:  30,00 £
Descrizione:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Numer części:  FV-FEMALE
Disponibile - Spedizione in 1-2 Giorni
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prezzo:  43,00 £
Descrizione:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Numer części:  FV-VEETWIN
Disponibile - Spedizione in 1-2 Giorni
Vee Block Single
Vee Block Single
ID: FV-VEE
Prezzo:  29,00 £
Descrizione:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
  • Numer części:  FV-VEE
Disponibile - Spedizione in 1-2 Giorni
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Prezzo:  17,00 £
Descrizione:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Numer części:  FV-POST
  • Gwint:  M4
Disponibile - Spedizione in 1-2 Giorni
Swift-Fix - Basic Kit
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Prezzo:  432,00 £
Descrizione:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Numer części:  FX-BASIC/KIT
  • Gwint:  M8
  • Zastosowanie:  WMP, Przenośne Ramię Pomiarowe
Disponibile - Spedizione in 1-2 Giorni
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Prezzo:  638,00 CHF
Descrizione:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Numer części:  FV-BP200/200F
  • Gwint:  M4
Disponibile - Spedizione in 1-2 Giorni
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
ID: FX-ARM
Prezzo:  142,00 CHF
Descrizione:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Numer części:  FX-ARM
  • Gwint:  M8
Disponibile - Spedizione in 1-2 Giorni
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Prezzo:  18,00 CHF
Descrizione:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Numer części:  FV-SLIDER
  • Gwint:  M4
Disponibile - Spedizione in 1-2 Giorni
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Prezzo:  18,00 CHF
Descrizione:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Numer części:  FV-SO/MAG
  • Długość:  10 mm
  • Średnica:  8 mm
Disponibile - Spedizione in 1-2 Giorni
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Prezzo:  46,00 CHF
Descrizione:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Numer części:  FV-SPRING
  • Gwint:  M4
Disponibile - Spedizione in 1-2 Giorni
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Prezzo:  15,00 CHF
Descrizione:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Numer części:  FV-CONE
  • Gwint:  M4
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Prezzo:  1.220,00 CHF
Descrizione:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-125SS3
  • Średnica zewnętrzna uchwytu (D1):  125
  • Zakres mocowania zewnętrznego (A):  1 - 126
  • Zakres mocowania wewnętrznego (I):  32 - 122
  • Materiał:  Stal Nierdzewna
Disponibile - Spedizione in 1-2 Giorni
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
ID: FC-160AL6
Prezzo:  1.565,00 CHF
Descrizione:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-160AL6
  • Średnica zewnętrzna uchwytu (D1):  160
  • Zakres Mocowania:  5 - 196
  • Materiał:  Aluminium
  • Mocowanie:  M4 / M8
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
ID: FC-240AL3
Prezzo:  3.715,00 CHF
Descrizione:  Three-jaw chuck made from aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-240AL3
  • Średnica zewnętrzna uchwytu (D1):  240
  • Zakres mocowania zewnętrznego (A):  1 - 288
  • Zakres mocowania wewnętrznego (I):  35 - 295
  • Materiał:  Aluminium
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
ID: FC-160SS3
Prezzo:  1.565,00 CHF
Descrizione:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-160SS3
  • Średnica zewnętrzna uchwytu (D1):  160
  • Zakres mocowania zewnętrznego (A):  1 - 150
  • Zakres mocowania wewnętrznego (I):  34 - 174
  • Materiał:  Stal Nierdzewna
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prezzo:  987,00 CHF
Descrizione:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-70SS3
  • Średnica zewnętrzna uchwytu (D1):  70
  • Zakres mocowania zewnętrznego (A):  1 - 71
  • Zakres mocowania wewnętrznego (I):  18 - 66
  • Materiał:  Stal Nierdzewna
Disponibile - Spedizione in 1-2 Giorni