text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji dotyczących bezpieczeństwa prosimy o zresetowanie hasła
  1. Strona Główna
  2. Katalog
  3. WMP

WMP

Universal Joint
Universal Joint
ID: FX-UNI__JOINT
Cena:  €91.00
Szybki Podgląd:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Vee Locator
Vee Locator
ID: FX-VEE
Cena:  €74.00
Szybki Podgląd:  The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Slider Block (M8)
Slider Block (M8)
ID: FX-SLIDER
Cena:  €24.00
Szybki Podgląd:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Cena:  €884.00
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Vee Locator
Vee Locator
ID: FV-FEMALE
Cena:  €25.00
Szybki Podgląd:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
W magazynie - wysyłka w ciągu 1-2 dni
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Cena:  €47.00
Szybki Podgląd:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
W magazynie - wysyłka w ciągu 1-2 dni
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Cena:  €695.00
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Cena:  €31.00
Szybki Podgląd:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
W magazynie - wysyłka w ciągu 1-2 dni
Support Stop
Support Stop
ID: FX-SUP__STOP
Cena:  €83.00
Szybki Podgląd:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Pillar 30x30x150mm
Pillar 30x30x150mm
ID: FX-PR30__150
Cena:  €41.00
Szybki Podgląd:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Wymiar:  30 x 30 x 150 mm
W magazynie - wysyłka w ciągu 1-2 dni
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Cena:  €1,011.00
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Pillar Kit
Pillar Kit
ID: FX-PILLAR__KIT
Cena:  €979.00
Szybki Podgląd:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
W magazynie - wysyłka w ciągu 1-2 dni
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Cena:  €1,726.00
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Centering Pin
Centering Pin
ID: FV-MALE
Cena:  €20.00
Szybki Podgląd:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Gwint:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Cena:  €47.00
Szybki Podgląd:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Wymiar:  130 x 30 mm
W magazynie - wysyłka w ciągu 1-2 dni
Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Cena:  €38.00
Szybki Podgląd:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Wymiar:  30 x 30 x 100 mm
W magazynie - wysyłka w ciągu 1-2 dni
Pillar 30x30x250mm
Pillar 30x30x250mm
ID: FX-PR30__250
Cena:  €47.00
Szybki Podgląd:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
  • Wymiar:  30 x 30 x 250 mm
W magazynie - wysyłka w ciągu 1-2 dni
Pillar 30x30x50mm
Pillar 30x30x50mm
ID: FX-PR30__50
Cena:  €36.00
Szybki Podgląd:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Wymiar:  30 x 30 x 50 mm
W magazynie - wysyłka w ciągu 1-2 dni
Fixture Baseplate 600x600x12mm (M8)
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
Cena:  €1,821.00
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Pillar 30x30x200mm
Pillar 30x30x200mm
ID: FX-PR30__200
Cena:  €44.00
Szybki Podgląd:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Wymiar:  30 x 30 x 200 mm
W magazynie - wysyłka w ciągu 1-2 dni