text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji dotyczących bezpieczeństwa prosimy o zresetowanie hasła
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Cena:  509,00 £
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Numer części:  GB0122-0008
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X1
  • Średnica:  60
Czas dostawy 10-15 dni
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Cena:  436,00 £
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Numer części:  GB0122-0019
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X3
  • Średnica:  40
Czas dostawy 10-15 dni
Spring Clamp
ID: FX-SPRING
Cena:  45,00 £
Szybki Podgląd: 

Spring clamps securely hold parts with minimal force while maintaining unobstructed measurement access.

  • Numer części:  FX-SPRING
  • Gwint:  Bez gwintu
  • Kompatybilność słupka naprężającego:  FX-POST
  • Zastosowanie:  WMP, Przenośne Ramię Pomiarowe
W magazynie - wysyłka w ciągu 1-2 dni
Thumb Screw M8
ID: FX-THUMB
Cena:  10,00 £
Szybki Podgląd:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Numer części:  FX-THUMB
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Pillar Top Plate  (10 x M8)
ID: FX-SUB45__120
Cena:  55,00 £
Szybki Podgląd: 

The pillar top plate allows additional Swift-Fix components to be mounted on top of a Swift-Fix pillar.

  • Numer części:  FX-SUB45/120
  • Wymiar:  120 x 45 x 12 mm
W magazynie - wysyłka w ciągu 1-2 dni
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Cena:  1 178,00 £
Szybki Podgląd: 

The Swift-Fix Starter Kit contains a base plate and a set of basic components for fixture assembly. The components are supplied in a sturdy box, keeping them well organized and readily accessible.

  • Numer części:  FX-STARTER/KIT
  • Gwint:  M8
  • Zastosowanie:  WMP, Przenośne Ramię Pomiarowe
W magazynie - wysyłka w ciągu 1-2 dni
Universal Joint
ID: FX-UNI__JOINT
Cena:  86,00 £
Szybki Podgląd:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Numer części:  FX-UNI/JOINT
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Cena:  913,00 £
Szybki Podgląd: 

This fixture base plate can be connected side-by-side with other base plates of the same size. M8 threaded holes and alphanumeric identification enable quick and easy fixture setup and repeatable fixture assembly.

  • Numer części:  FX-BP300/400
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Cena:  30,00 £
Szybki Podgląd: 

The tension clamp enables workpieces to be clamped quickly and easily with low clamping force, without obstructing access to the measurement features.

  • Numer części:  FX-CTSML
  • Gwint:  Bez gwintu
  • Kompatybilność słupka naprężającego:  FX-POST
  • Zastosowanie:  WMP, Przenośne Ramię Pomiarowe
Czas dostawy 10-15 dni
Cap Screw Set M8 (L = 20 mm)
ID: FX-CAPM8__20
Cena:  17,00 £
Szybki Podgląd:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Numer części:  FX-CAPM8/20
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Swift-Fix - Gold Kit
ID: FX-GOLD__KIT
Cena:  2 504,00 £
Szybki Podgląd: 

The Swift-Fix Gold Kit contains 93 components and is designed for the construction of larger, more complex fixtures.The components are stored in a dedicated case, ensuring individual items are always easy to find.

  • Numer części:  FX-GOLD/KIT
  • Gwint:  M8
  • Zastosowanie:  WMP, Przenośne Ramię Pomiarowe
W magazynie - wysyłka w ciągu 1-2 dni
Kinematic Support Kit
ID: FX-KINKIT
Cena:  238,00 £
Szybki Podgląd:  The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
  • Numer części:  FX-KINKIT
W magazynie - wysyłka w ciągu 1-2 dni
Standoff Magnet  (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
Cena:  20,00 £
Szybki Podgląd: 

The magnetic standoff provides reliable and repeatable holding and raising of magnetic workpieces without restricting access to relevant measurement areas.

  • Numer części:  FX-SO/MAG
  • Gwint:  M8
  • Średnica:  16 mm
  • Długość:  20 mm
W magazynie - wysyłka w ciągu 1-2 dni
Resting Cone (M8)
ID: FX-CONE
Cena:  20,00 £
Szybki Podgląd:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Numer części:  FX-CONE
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Pillar Base Plate
ID: FX-PR30PLATE
Cena:  45,00 £
Szybki Podgląd: 

The pillar base plate is used to securely attach a pillar to either a CMM table or a fixture base plate.

  • Numer części:  FX-PR30PLATE
  • Wymiar:  130 x 30 mm
W magazynie - wysyłka w ciągu 1-2 dni
Pillar 30x30x100mm
ID: FX-PR30__100
Cena:  36,00 £
Szybki Podgląd:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Numer części:  FX-PR30/100
  • Wymiar:  30 x 30 x 100 mm
W magazynie - wysyłka w ciągu 1-2 dni
Pillar 30x30x250mm
ID: FX-PR30__250
Cena:  45,00 £
Szybki Podgląd:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
  • Numer części:  FX-PR30/250
  • Wymiar:  30 x 30 x 250 mm
W magazynie - wysyłka w ciągu 1-2 dni
Pillar 30x30x50mm
ID: FX-PR30__50
Cena:  35,00 £
Szybki Podgląd:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Numer części:  FX-PR30/50
  • Wymiar:  30 x 30 x 50 mm
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 16 mm / L = 30 mm)
ID: FX-SO16__30
Cena:  16,00 £
Szybki Podgląd:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FX-SO16/30
  • Gwint:  M8
  • Średnica:  16 mm
  • Długość:  30 mm
W magazynie - wysyłka w ciągu 1-2 dni
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Cena:  17,00 £
Szybki Podgląd: 

Standoffs with pins enable precise positioning and secure support of workpieces without restricting access to relevant measurement areas.

  • Numer części:  FV-SO/PIN
  • Gwint:  M4
  • Średnica:  8 mm
  • Długość:  10 mm
W magazynie - wysyłka w ciągu 1-2 dni