text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji dotyczących bezpieczeństwa prosimy o zresetowanie hasła
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Cena:  480,00 €
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Numer części:  GB0122-0019
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X3
  • Średnica:  40
Czas dostawy 10-15 dni
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Cena:  560,00 €
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Numer części:  GB0122-0008
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X1
  • Średnica:  60
Czas dostawy 10-15 dni
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Cena:  1 004,00 €
Szybki Podgląd: 

This fixture base plate can be connected side-by-side with other base plates of the same size. M8 threaded holes and alphanumeric identification enable quick and easy fixture setup and repeatable fixture assembly.

  • Numer części:  FX-BP300/400
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Vee Locator
ID: FV-FEMALE
Cena:  33,00 €
Szybki Podgląd:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Numer części:  FV-FEMALE
W magazynie - wysyłka w ciągu 1-2 dni
Kinematic Fixture Plate 300x300 mm (Plain)
ID: KPP-300__300
Cena:  546,00 €
Szybki Podgląd:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Numer części:  KPP-300/300
  • Kompatybilność płyty:  KB-250/250, KB-UNIVL
W magazynie - wysyłka w ciągu 1-2 dni
Kinematic Fixture Plate 500x500 mm (Plain)
ID: KPP-500__500
Cena:  835,00 €
Szybki Podgląd:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Numer części:  KPP-500/500
  • Kompatybilność płyty:  KB-400/400, KB-UNIVL
W magazynie - wysyłka w ciągu 1-2 dni
Kinematic Base for Fixture Plate 500x500mm
ID: KB-400__400
Cena:  1 102,00 €
Szybki Podgląd: 

The kinematic base plate remains mounted on the machine table and enables fast, accurate, and highly repeatable positioning of kinematic fixture plates without the need for manual alignment.

  • Numer części:  KB-400/400
  • Kompatybilność płyty:  KPP-500/500, KPT-500/500
W magazynie - wysyłka w ciągu 1-2 dni
Universal Kinematic Fixture Base
ID: KB-UNIVL
Cena:  745,00 €
Szybki Podgląd: 

The universal kinematic base plate remains mounted on the machine and ensures accurate and repeatable positioning of kinematic fixture plates. It can be used with all sizes of kinematic fixture plates.

  • Numer części:  KB-UNIVL
  • Kompatybilność płyty:  KPP-300/300, KPT-300/300, KPP-400/400, KPT-400/400, KPP-500/500, KPT-500/500
W magazynie - wysyłka w ciągu 1-2 dni
Kinematic Base for Fixture Plate 400x400mm
ID: KB-300__300
Cena:  768,00 €
Szybki Podgląd:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Numer części:  KB-300/300
  • Kompatybilność płyty:  KPP-400/400, KPT-400/400
W magazynie - wysyłka w ciągu 1-2 dni
Kinematic Fixture Plate 400x400mm (Plain)
ID: KPP-400__400
Cena:  650,00 €
Szybki Podgląd:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Numer części:  KPP-400/400
  • Kompatybilność płyty:  KB-300/300, KB-UNIVL
W magazynie - wysyłka w ciągu 1-2 dni
6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
ID: FC-125AL6
Cena:  1 318,00 €
Szybki Podgląd: 

6-jaw chuck with flange made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Numer części:  FC-125AL6
  • Średnica zewnętrzna uchwytu (D1):  125
  • Zakres Mocowania:  5 - 156
  • Materiał:  Aluminium
  • Mocowanie:  M4 / M8
W magazynie - wysyłka w ciągu 1-2 dni
6-Jaw Chuck with Flange (Aluminium / Ø 160 mm)
ID: FC-160AL6
Cena:  1 565,00 €
Szybki Podgląd: 

6-Jaw chuck with flange made of aluminium with an outside diameter of 160 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Numer części:  FC-160AL6
  • Średnica zewnętrzna uchwytu (D1):  160
  • Zakres Mocowania:  5 - 196
  • Materiał:  Aluminium
  • Mocowanie:  M4 / M8
W magazynie - wysyłka w ciągu 1-2 dni
6-Jaw Chuck without Flange (Aluminium / Ø 125 mm)
ID: FC-125AL6-NF
Cena:  1 140,00 €
Szybki Podgląd: 

6-jaw chuck made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Numer części:  FC-125AL6-NF
  • Średnica zewnętrzna uchwytu (D1):  125
  • Zakres Mocowania:  5 - 156
  • Materiał:  Aluminium
  • Mocowanie (G):  M5
Czas dostawy 10-15 dni
6-Jaw Chuck without Flange (Aluminium / Ø 160 mm)
ID: FC-160AL6-NF
Cena:  1 490,00 €
Szybki Podgląd: 

6-jaw chuck made of aluminium with an outside diameter of 160 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Numer części:  FC-160AL6-NF
  • Średnica zewnętrzna uchwytu (D1):  160
  • Zakres Mocowania:  5 - 196
  • Materiał:  Aluminium
  • Mocowanie (G):  M6
Czas dostawy 10-15 dni
3-Jaw Chuck without Flange (Stainless Steel / Ø 125 mm)
ID: FC-125SS3-NF
Cena:  1 140,00 €
Szybki Podgląd: 

3-jaw chuck made of stainless steel with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Numer części:  FC-125SS3-NF
  • Średnica zewnętrzna uchwytu (D1):  125
  • Zakres mocowania zewnętrznego (A):  1 - 126
  • Zakres mocowania wewnętrznego (I):  32 - 122
  • Materiał:  Stal Nierdzewna
Czas dostawy 10-15 dni
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Cena:  33,00 €
Szybki Podgląd: 

The tension clamp enables workpieces to be clamped quickly and easily with low clamping force, without obstructing access to the measurement features.

  • Numer części:  FX-CTSML
  • Gwint:  Bez gwintu
  • Kompatybilność słupka naprężającego:  FX-POST
  • Zastosowanie:  WMP, Przenośne Ramię Pomiarowe
W magazynie - wysyłka w ciągu 1-2 dni
Spring Clamp
ID: FX-SPRING
Cena:  50,00 €
Szybki Podgląd: 

Spring clamps securely hold parts with minimal force while maintaining unobstructed measurement access.

  • Numer części:  FX-SPRING
  • Gwint:  Bez gwintu
  • Kompatybilność słupka naprężającego:  FX-POST
  • Zastosowanie:  WMP, Przenośne Ramię Pomiarowe
W magazynie - wysyłka w ciągu 1-2 dni
Thumb Screw M8
ID: FX-THUMB
Cena:  11,00 €
Szybki Podgląd:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Numer części:  FX-THUMB
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Cena:  18,00 €
Szybki Podgląd:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FX-SO16/20
  • Gwint:  M8
  • Średnica:  16 mm
  • Długość:  20 mm
W magazynie - wysyłka w ciągu 1-2 dni
Hinge Pivot with Handle
ID: FX-PR30HINGE
Cena:  84,00 €
Szybki Podgląd: 

The hinge pivot connects two pillars at adjustable angles, providing greater flexibility when mounting large fixtures.

  • Numer części:  FX-PR30HINGE
W magazynie - wysyłka w ciągu 1-2 dni