Skip to content Skip to navigation menu
As part of our new security upgrades, you are requested to reset your password
  1. Home
  2. Catalogue
  3. CMM
  4. Fixtures

Fixtures

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Price:  480,00 €
Quick Overview:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Numer części:  GB0122-0019
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X3
  • Średnica:  40
Delivery time 10-15 days
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Price:  560,00 €
Quick Overview:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Numer części:  GB0122-0008
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X1
  • Średnica:  60
Delivery time 10-15 days
Vee Locator
Vee Locator
ID: FV-FEMALE
Price:  33,00 €
Quick Overview:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Numer części:  FV-FEMALE
In Stock - Despatched 1-2 Days
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Price:  279,00 €
Quick Overview:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Numer części:  FV-GUIDE480
  • Kompatybilność płyty:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
In Stock - Despatched 1-2 Days
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Price:  22,00 €
Quick Overview:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Numer części:  FV-CONEADJ
  • Gwint:  M4
In Stock - Despatched 1-2 Days
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Price:  39,00 €
Quick Overview:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Numer części:  FV-LATSML
  • Długość:  10 mm
  • Średnica:  8 mm
In Stock - Despatched 1-2 Days
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
ID: FV-BP200__200P
Price:  594,00 €
Quick Overview:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Numer części:  FV-BP200/200P
  • Gwint:  M4
In Stock - Despatched 1-2 Days
Centering Pin
Centering Pin
ID: FV-MALE
Price:  24,00 €
Quick Overview:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Numer części:  FV-MALE
  • Gwint:  M4
In Stock - Despatched 1-2 Days
Swift-Fix Vision - Full Kit
Swift-Fix Vision - Full Kit
ID: FV-FULLKIT
Price:  2 530,00 €
Quick Overview:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Numer części:  FV-FULLKIT
  • Gwint:  M4
  • Zastosowanie:  Multisensor CMM
In Stock - Despatched 1-2 Days
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Price:  1 220,00 €
Quick Overview:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-125SS3
  • Średnica zewnętrzna uchwytu (D1):  125
  • Zakres mocowania zewnętrznego (A):  1 - 126
  • Zakres mocowania wewnętrznego (I):  32 - 122
  • Materiał:  Stal Nierdzewna
In Stock - Despatched 1-2 Days
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Price:  1 318,00 €
Quick Overview:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-125AL6
  • Średnica zewnętrzna uchwytu (D1):  125
  • Zakres Mocowania:  5 - 156
  • Materiał:  Aluminium
  • Mocowanie:  M4 / M8
In Stock - Despatched 1-2 Days
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Price:  1 004,00 €
Quick Overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Numer części:  FX-BP300/400
  • Gwint:  M8
In Stock - Despatched 1-2 Days
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Price:  33,00 €
Quick Overview:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Numer części:  FX-CTSML
  • Gwint:  Bez gwintu
In Stock - Despatched 1-2 Days
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Price:  zł43.00
Quick Overview:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FV-SO8/20
  • Długość:  20 mm
  • Średnica:  8 mm
In Stock - Despatched 1-2 Days
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Price:  zł77.00
Quick Overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FX-SO16/20
  • Długość:  20 mm
  • Średnica:  16 mm
In Stock - Despatched 1-2 Days
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Price:  zł361.00
Quick Overview:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Numer części:  FX-PR30HINGE
In Stock - Despatched 1-2 Days
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Price:  zł142.00
Quick Overview:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Numer części:  FX-CTMED
  • Gwint:  Bez gwintu
In Stock - Despatched 1-2 Days
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Price:  zł3,522.00
Quick Overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Numer części:  FX-BP300/300
  • Gwint:  M8
In Stock - Despatched 1-2 Days
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
ID: FC-160SS3-NF
Price:  zł6,106.00
Quick Overview:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-160SS3-NF
  • Średnica zewnętrzna uchwytu (D1):  160
  • Zakres mocowania zewnętrznego (A):  1 - 150
  • Zakres mocowania wewnętrznego (I):  34 - 174
  • Materiał:  Stal Nierdzewna
Delivery time 10-15 days
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
Price:  zł4,902.00
Quick Overview:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-125AL6-NF
  • Średnica zewnętrzna uchwytu (D1):  125
  • Zakres Mocowania:  5 - 156
  • Materiał:  Aluminium
  • Mocowanie (G):  M5
Delivery time 10-15 days