text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji dotyczących bezpieczeństwa prosimy o zresetowanie hasła
Corner Bracket
ID: FV-CNRBRKT
Cena:  224,00 zł
Szybki Podgląd:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Numer części:  FV-CNRBRKT
W magazynie - wysyłka w ciągu 1-2 dni
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Cena:  2 743,00 zł
Szybki Podgląd:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Numer części:  FV-BP200/200F
  • Gwint:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Resting Cone (M4)
ID: FV-CONE
Cena:  65,00 zł
Szybki Podgląd:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Numer części:  FV-CONE
  • Gwint:  M4
W magazynie - wysyłka w ciągu 1-2 dni
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Cena:  4 244,00 zł
Szybki Podgląd:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-70SS3
  • Średnica zewnętrzna uchwytu (D1):  70
  • Zakres mocowania zewnętrznego (A):  1 - 71
  • Zakres mocowania wewnętrznego (I):  18 - 66
  • Materiał:  Stal Nierdzewna
W magazynie - wysyłka w ciągu 1-2 dni
Support Stop
ID: FX-SUP__STOP
Cena:  374,00 zł
Szybki Podgląd:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Numer części:  FX-SUP/STOP
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 20 mm / L = 20 mm)
ID: FX-SO20__20
Cena:  82,00 zł
Szybki Podgląd:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FX-SO20/20
  • Długość:  20 mm
  • Średnica:  20 mm
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 20 mm / L = 100 mm)
ID: FX-SO20__100
Cena:  112,00 zł
Szybki Podgląd:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FX-SO20/100
  • Długość:  100 mm
  • Średnica:  20 mm
W magazynie - wysyłka w ciągu 1-2 dni
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Cena:  4 317,00 zł
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Numer części:  FX-BP300/400
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Cena:  142,00 zł
Szybki Podgląd:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Numer części:  FX-CTSML
  • Gwint:  Bez gwintu
W magazynie - wysyłka w ciągu 1-2 dni
Vee Block Twin
ID: FV-VEETWIN
Cena:  202,00 zł
Szybki Podgląd:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Numer części:  FV-VEETWIN
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Cena:  43,00 zł
Szybki Podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FV-SO8/20
  • Długość:  20 mm
  • Średnica:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Hinge Pivot With Handle
ID: FX-PR30HINGE
Cena:  361,00 zł
Szybki Podgląd:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Numer części:  FX-PR30HINGE
W magazynie - wysyłka w ciągu 1-2 dni
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Cena:  142,00 zł
Szybki Podgląd:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Numer części:  FX-CTMED
  • Gwint:  Bez gwintu
W magazynie - wysyłka w ciągu 1-2 dni
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Cena:  3 522,00 zł
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Numer części:  FX-BP300/300
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Spring Nut (M8)
ID: FX-M8SPRGNUT
Cena:  142,00 zł
Szybki Podgląd:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Numer części:  FX-M8SPRGNUT
W magazynie - wysyłka w ciągu 1-2 dni
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Cena:  168,00 zł
Szybki Podgląd:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Numer części:  FV-LATSML
  • Długość:  10 mm
  • Średnica:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Cena:  249,00 zł
Szybki Podgląd:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Numer części:  FX-LATMED
  • Długość:  20 mm
  • Średnica:  16 mm
W magazynie - wysyłka w ciągu 1-2 dni
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
Cena:  4 562,00 zł
Szybki Podgląd:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Numer części:  FX-BRONZE/KIT
  • Gwint:  M8
  • Zastosowanie:  WMP, Przenośne Ramię Pomiarowe
W magazynie - wysyłka w ciągu 1-2 dni
Pillar 30x30x150mm
ID: FX-PR30__150
Cena:  185,00 zł
Szybki Podgląd:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Numer części:  FX-PR30/150
  • Wymiar:  30 x 30 x 150 mm
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Cena:  43,00 zł
Szybki Podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FV-SO8/25
  • Długość:  25 mm
  • Średnica:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni