text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prijs:  CHF 480,00
Beknopt overzicht:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Onderdeelnummer:  GB0122-0019
  • Compatibiliteit:  HP-S-X3 Stylus Clampings
  • Diameter:  40
Levertijd 10-15 dagen
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prijs:  CHF 560,00
Beknopt overzicht:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Onderdeelnummer:  GB0122-0008
  • Compatibiliteit:  HP-S-X1 Stylus Clampings
  • Diameter:  60
Levertijd 10-15 dagen
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prijs:  CHF 1.004,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP300/400
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Vee Locator
ID: FV-FEMALE
Prijs:  CHF 33,00
Beknopt overzicht:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Onderdeelnummer:  FV-FEMALE
Op voorraad - verzending 1-2 dagen
Vee Block Twin
ID: FV-VEETWIN
Prijs:  CHF 47,00
Beknopt overzicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Onderdeelnummer:  FV-VEETWIN
Op voorraad - verzending 1-2 dagen
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Prijs:  CHF 279,00
Beknopt overzicht:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Onderdeelnummer:  FV-GUIDE480
  • Basisplaat comptabiliteit:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
Op voorraad - verzending 1-2 dagen
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prijs:  CHF 10,00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FV-SO8/20
  • Lengte:  20 mm
  • Diameter:  8 mm
Op voorraad - verzending 1-2 dagen
Cone Adjustable (M4)
ID: FV-CONEADJ
Prijs:  CHF 22,00
Beknopt overzicht:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Onderdeelnummer:  FV-CONEADJ
  • Schroefdraad:  M4
Op voorraad - verzending 1-2 dagen
3-Jaw 125 Inside Clamping Set (Stainless Steel)
ID: FC-JS-125SS3-I
Prijs:  CHF 418,00
Beknopt overzicht: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø125 mm.

  • Onderdeelnummer:  FC-JS-125SS3-I
  • Materiaal:  Stainless Steel, vacuum-hardened, ground
Levertijd 10-15 dagen
3-Jaw 125 Outside Clamping Set (Stainless Steel)
ID: FC-JS-125SS3-E
Prijs:  CHF 418,00
Beknopt overzicht: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø125 mm.

  • Onderdeelnummer:  FC-JS-125SS3-E
  • Materiaal:  Stainless Steel, vacuum-hardened, ground
Levertijd 10-15 dagen
6-Jaw 125 Inside/Outside Clamping Set (AL)
ID: FC-JS-125AL6-IE
Prijs:  CHF 730,00
Beknopt overzicht: 

6-jaw clamping set for inside and outside clamping. Made of aluminum with hard-coated surface and positioning holes for clamping and stop pins. Compatible with 6-jaw chucks made of aluminum Ø125 mm.

  • Onderdeelnummer:  FC-JS-125AL6-IE
  • Materiaal:  Aluminium, hard anodised
Levertijd 10-15 dagen
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Prijs:  CHF 10,00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FV-SO8/25
  • Lengte:  25 mm
  • Diameter:  8 mm
Op voorraad - verzending 1-2 dagen
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Prijs:  CHF 605,00
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Onderdeelnummer:  FV-BP200/200C
  • Schroefdraad:  M4
Op voorraad - verzending 1-2 dagen
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Prijs:  CHF 22,00
Beknopt overzicht:  The angle block slider enables users to position elements horizontally on the base plate.
  • Onderdeelnummer:  FV-ANGSLIDER
  • Schroefdraad:  M4
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Prijs:  CHF 1.642,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP500/500
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
Prijs:  CHF 2.052,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP600/600
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Spring Clamp (M8)
ID: FX-SPRING
Prijs:  CHF 50,00
Beknopt overzicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Onderdeelnummer:  FX-SPRING
  • Schroefdraad:  Zonder schroefdraad
Op voorraad - verzending 1-2 dagen
Thumb Screw M8
ID: FX-THUMB
Prijs:  CHF 11,00
Beknopt overzicht:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Onderdeelnummer:  FX-THUMB
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Prijs:  CHF 18,00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FX-SO16/20
  • Lengte:  20 mm
  • Diameter:  16 mm
Op voorraad - verzending 1-2 dagen
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prijs:  CHF 84,00
Beknopt overzicht:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Onderdeelnummer:  FX-PR30HINGE
Op voorraad - verzending 1-2 dagen