text.skipToContent text.skipToNavigation
Nellambito dei nostri nuovi aggiornamenti di sicurezza ti viene richiesto di reimpostare la password
SWIFT-CHECK
ID: GB0096-2001
Prezzo:  5.330,00 €
Descrizione:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Codice prodotto:  GB0096-2001
  • Compatibilità CMM:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Compatibilità software:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Time:  Verifica della lunghezza: 20 minuti, Controllo anelli: 5 Minuti, Verifica della sfera: 5 Minuti, Verifica del polso / della testa del tastatore: 10 Minuti
  • Dimensioni:  Length Bar Length = 300 mm, Diametro dell'anello = 25 mm, Diametro de sfere = 25 mm
Consegna > 25 giorni
Clamping and Stop Pin Set for 6-Jaw Chuck Ø160 mm
ID: FC-PS-160AL6
Prezzo:  940,00 €
Descrizione: 

Clamping and stop pin set for 6-jaw chucks (Aluminium / D = Ø160 mm).

  • Codice prodotto:  FC-PS-160AL6
Tempi di consegna 10-15 Giorni
Basic Jaw Set (Aluminium)
ID: FC-JS-240AL3-I
Prezzo:  1.020,00 €
Descrizione: 

Basic jaw set made of aluminum with hard-coated surface. Compatible with 3-jaw chucks made of aluminium with Ø240 mm.

  • Codice prodotto:  FC-JS-240AL3-I
  • Materiale:  Alluminio con superficie rivestita con rivestimento duro
Tempi di consegna 10-15 Giorni
Thumb Screw M8
ID: FX-THUMB
Prezzo:  10,00 €
Descrizione:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Codice prodotto:  FX-THUMB
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prezzo:  10,00 €
Descrizione:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FV-SO8/20
  • Lunghezza:  20 mm
  • Diametro:  8 mm
Disponibile - Spedizione in 1-2 Giorni
Baseplate Retaining Screw (M8)
ID: FX-BPRTR
Prezzo:  6,00 €
Descrizione:  Retaining screws secure base plates on the machine table and make it simple to mount multiple plates next to each other.
  • Codice prodotto:  FX-BPRTR
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 8 mm / L = 15 mm)
ID: FV-SO8__15
Prezzo:  10,00 €
Descrizione:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FV-SO8/15
  • Lunghezza:  15 mm
  • Diametro:  8 mm
Disponibile - Spedizione in 1-2 Giorni
Resting Cone (M4)
ID: FV-CONE
Prezzo:  15,00 €
Descrizione:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Codice prodotto:  FV-CONE
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prezzo:  930,00 €
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP300/400
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prezzo:  33,00 €
Descrizione:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Codice prodotto:  FX-CTSML
  • Filetto:  Senza filettatura
Disponibile - Spedizione in 1-2 Giorni
Vee Locator
ID: FV-FEMALE
Prezzo:  33,00 €
Descrizione:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Codice prodotto:  FV-FEMALE
Disponibile - Spedizione in 1-2 Giorni
Vee Block Twin
ID: FV-VEETWIN
Prezzo:  47,00 €
Descrizione:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Codice prodotto:  FV-VEETWIN
Disponibile - Spedizione in 1-2 Giorni
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Prezzo:  262,00 €
Descrizione:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Codice prodotto:  FV-GUIDE480
  • Compatibilità piastra di fissaggio:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
Disponibile - Spedizione in 1-2 Giorni
Cone Adjustable (M4)
ID: FV-CONEADJ
Prezzo:  22,00 €
Descrizione:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Codice prodotto:  FV-CONEADJ
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Prezzo:  18,00 €
Descrizione:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FX-SO16/20
  • Lunghezza:  20 mm
  • Diametro:  16 mm
Disponibile - Spedizione in 1-2 Giorni
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prezzo:  84,00 €
Descrizione:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Codice prodotto:  FX-PR30HINGE
Disponibile - Spedizione in 1-2 Giorni
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Prezzo:  33,00 €
Descrizione:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Codice prodotto:  FX-CTMED
  • Filetto:  Senza filettatura
Disponibile - Spedizione in 1-2 Giorni
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prezzo:  780,00 €
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP300/300
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Prezzo:  26,00 €
Descrizione:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FX-SO16/100
  • Lunghezza:  100 mm
  • Diametro:  16 mm
Disponibile - Spedizione in 1-2 Giorni
Spring Nut (M8)
ID: FX-M8SPRGNUT
Prezzo:  33,00 €
Descrizione:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Codice prodotto:  FX-M8SPRGNUT
Disponibile - Spedizione in 1-2 Giorni